hostapd: keine Verbindung möglich

« Vorherige1Nächste »

Status: Gelöst | Ubuntu-Version: Server 19.10 (Eoan Ermine)
Antworten |

McAddress

Anmeldungsdatum:
15. Februar 2020

Beiträge: Zähle...

Zitieren

15. Februar 2020 18:53

Hallo,

Auf einem Raspberry Pi 4 läuft als Betriebssystem Ubuntu Server 19.10.1 arm64 raspi3, die zum jetztigen Zeitpunkt neuste Version. Ich habe versucht, einen Access Point mit hostapd zu erstellen, bisher aber leider ohne Erfolg. Es ist nicht möglich, mit anderen Geräten eine Verbindung herzustellen.

Das ist die hostapd.conf:

interface=wlan0
ssid=MySSID
country_code=DE
ieee80211d=1
ieee80211h=1
hw_mode=g
channel=10
auth_algs=1
wmm_enabled=1
ieee80211n=1
wpa=2
wpa_passphrase=Secret
wpa_key_mgmt=WPA-PSK
rsn_pairwise=TKIP CCMP
driver=nl80211

Nach dem Start von hostapd mit "sudo hostapd -dd /etc/hostapd/hostapd.conf" kann ich das WLAN "MySSID" mit anderen Geräten sehen, eine Verbindung ist jedoch bisher nicht gelungen. Wenn ich es mit einem Windows 10 Tablet versuche, bekomme ich von WIndows die aussagekräftige Fehlermeldung "Verbindung nicht möglich". In der Ausgabe von hostapd ändert sich einfach gar nichts, als hätte man gar keinen Versuch unternommen. Wenn ich es mit einem Android Smartphone versuche, bekomme ich von Android die Fehlermeldung "Authentication failed". In der Ausgabe von hostapd erscheinen viele Zeilen, insgesammt vier mal "New STA". Ich habe das Kennwort mehrfach kontrolliert und bin mir sicher, dass es richtig ist. Dennoch habe ich anschließend zum Test absichtlich ein falsches Kennwort eingegeben, und dann verhielt sich alles anders. Von Android bekam ich jetzt die Fehlermeldung "Wrong Password". In der Ausgabe von hostapd erschien jetzt nur ein mal "New STA" (das letzte "New STA" in der Ausgabe unten). Ich kann mir das nicht erklären und ich habe keine Idee mehr, was ich noch versuchen könnte. Ich bin für jeden Rat dankbar.

Ausgabe von hostapd:

random: getrandom() support available
Configuration file: /etc/hostapd/hostapd.conf
nl80211: Using driver-based roaming
nl80211: TDLS supported
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:6
nl80211: Using driver-based off-channel TX
nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: Enable multi-channel concurrent (driver advertised support)
nl80211: use P2P_DEVICE support
nl80211: interface wlan0 in phy phy0
nl80211: Set mode ifindex 4 iftype 3 (AP)
nl80211: Setup AP(wlan0) - device_ap_sme=1 use_monitor=0
nl80211: Subscribe to mgmt frames with AP handle 0xaaab164a5720 (device SME)
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xaaab164a5720 match=04
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xaaab164a5720 match=0501
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xaaab164a5720 match=0503
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xaaab164a5720 match=0504
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xaaab164a5720 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xaaab164a5720 match=08
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xaaab164a5720 match=09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xaaab164a5720 match=0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xaaab164a5720 match=11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xaaab164a5720 match=12
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xaaab164a5720 match=7f
nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0xaaab164a5720 match=
nl80211: Enable Probe Request reporting nl_preq=0xaaab164aa160
nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0xaaab164aa160 match=
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
nl80211: Add own interface ifindex 4 (ifidx_reason -1)
nl80211: if_indices[16]: 4(-1)
phy: phy0
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Previous country code 00, new country code DE 
Continue interface setup after channel list update
ctrl_iface not configured!
Channel list update timeout - try to continue anyway
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
nl80211: Mode IEEE 802.11a: 5170 5180 5190 5200 5210 5220 5230 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805 5825
nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=13 freq=2472 MHz max_tx_power=20 dBm
Allowed channel: mode=1 chan=14 freq=2484 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=34 freq=5170 MHz max_tx_power=3 dBm
Allowed channel: mode=2 chan=36 freq=5180 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=38 freq=5190 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=40 freq=5200 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=42 freq=5210 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=44 freq=5220 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=46 freq=5230 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=48 freq=5240 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=52 freq=5260 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=56 freq=5280 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=60 freq=5300 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=64 freq=5320 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=100 freq=5500 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=104 freq=5520 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=108 freq=5540 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=112 freq=5560 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=116 freq=5580 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=120 freq=5600 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=124 freq=5620 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=128 freq=5640 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=132 freq=5660 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=136 freq=5680 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=140 freq=5700 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=144 freq=5720 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=149 freq=5745 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=153 freq=5765 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=157 freq=5785 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=161 freq=5805 MHz max_tx_power=20 dBm
Allowed channel: mode=2 chan=165 freq=5825 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=12 freq=2467 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=13 freq=2472 MHz max_tx_power=20 dBm
Allowed channel: mode=0 chan=14 freq=2484 MHz max_tx_power=20 dBm
DFS support is enabled
Completing interface initialization
Mode: IEEE 802.11g  Channel: 10  Frequency: 2457 MHz
DFS 0 channels required radar detection
nl80211: Set freq 2457 (ht_enabled=1, vht_enabled=0, he_enabled=0, bandwidth=20 MHz, cf1=2457 MHz, cf2=0 MHz)
  * freq=2457
  * he_enabled=0
  * vht_enabled=0
  * ht_enabled=1
  * sec_channel_offset=0
  * channel_type=1
RATE[0] rate=10 flags=0x1
RATE[1] rate=20 flags=0x1
RATE[2] rate=55 flags=0x1
RATE[3] rate=110 flags=0x1
RATE[4] rate=60 flags=0x0
RATE[5] rate=90 flags=0x0
RATE[6] rate=120 flags=0x0
RATE[7] rate=180 flags=0x0
RATE[8] rate=240 flags=0x0
RATE[9] rate=360 flags=0x0
RATE[10] rate=480 flags=0x0
RATE[11] rate=540 flags=0x0
hostapd_setup_bss(hapd=0xaaab164a3c00 (wlan0), first=1)
wlan0: Flushing old station entries
nl80211: flush -> DEL_STATION wlan0 (all)
nl80211: Station flush failed: ret=-14 (Bad address)
wlan0: Could not connect to kernel driver
wlan0: Deauthenticate all stations
nl80211: sta_remove -> DEL_STATION wlan0 ff:ff:ff:ff:ff:ff --> 0 (Success)
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-22 Invalid argument)
Failed to clear default encryption keys (ifname=wlan0 keyidx=0)
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-22 Invalid argument)
Failed to clear default encryption keys (ifname=wlan0 keyidx=3)
Using interface wlan0 with hwaddr aa:bb:cc:dd:ee:ff and ssid "MySSID"
Deriving WPA PSK based on passphrase
SSID - hexdump_ascii(len=6):
     4d 79 53 53 49 44                                 MySSID          
PSK (ASCII passphrase) - hexdump_ascii(len=17): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
random: Got 20/20 random bytes
Get randomness: len=32 entropy=0
GMK - hexdump(len=32): [REMOVED]
Get randomness: len=32 entropy=0
Key Counter - hexdump(len=32): [REMOVED]
WPA: Delay group state machine start until Beacon frames have been configured
nl80211: Set beacon (beacon_set=0)
nl80211: Beacon head - hexdump(len=57): 80 00 00 00 ff ff ff ff ff ff dc a6 32 51 66 21 dc a6 32 51 66 21 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 06 4d 79 53 53 49 44 01 08 82 84 8b 96 0c 12 18 24 03 01 0a
nl80211: Beacon tail - hexdump(len=127): 07 06 44 45 20 01 0e 14 2a 01 04 32 04 30 48 60 6c 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 0c 00 2d 1a 0c 00 1f ff 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 04 00 00 00 02 dd 18 00 50 f2 02 01 01 01 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00
nl80211: ifindex=4
nl80211: beacon_int=100
nl80211: beacon_rate=0
nl80211: rate_type=0
nl80211: dtim_period=2
nl80211: ssid=MySSID
  * beacon_int=100
  * dtim_period=2
nl80211: hidden SSID not in use
nl80211: privacy=1
nl80211: auth_algs=0x1
nl80211: wpa_version=0x2
nl80211: key_mgmt_suites=0x2
nl80211: pairwise_ciphers=0x18
nl80211: group_cipher=0x8
nl80211: SMPS mode - off
nl80211: beacon_ies - hexdump(len=6): 7f 04 00 00 00 02
nl80211: proberesp_ies - hexdump(len=6): 7f 04 00 00 00 02
nl80211: assocresp_ies - hexdump(len=6): 7f 04 00 00 00 02
WPA: Start group state machine to set initial keys
WPA: group state machine entering state GTK_INIT (VLAN-ID 0)
Get randomness: len=32 entropy=0
GTK - hexdump(len=32): [REMOVED]
WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0)
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=2 addr=0xaaaae74752b0 key_idx=1 set_tx=1 seq_len=0 key_len=32
nl80211: KEY_DATA - hexdump(len=32): [REMOVED]
   broadcast key
nl80211: Set wlan0 operstate 0->1 (UP)
netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=6 (IF_OPER_UP)
nl80211: TX queue param set: queue=0 aifs=1 cw_min=3 cw_max=7 burst_time=15 --> res=-95
Failed to set TX queue parameters for queue 0.
nl80211: TX queue param set: queue=1 aifs=1 cw_min=7 cw_max=15 burst_time=30 --> res=-95
Failed to set TX queue parameters for queue 1.
nl80211: TX queue param set: queue=2 aifs=3 cw_min=15 cw_max=63 burst_time=0 --> res=-95
Failed to set TX queue parameters for queue 2.
nl80211: TX queue param set: queue=3 aifs=7 cw_min=15 cw_max=1023 burst_time=0 --> res=-95
Failed to set TX queue parameters for queue 3.
wlan0: interface state COUNTRY_UPDATE->ENABLED
wlan0: AP-ENABLED 
wlan0: Setup of interface done.
RTM_NEWLINK: ifi_index=4 ifname=wlan0 operstate=6 linkmode=0 ifi_family=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
VLAN: RTM_NEWLINK: ifi_index=4 ifname=wlan0 ifi_family=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
VLAN: vlan_newlink(wlan0)
nl80211: Event message available
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
nl80211: New station XX:XX:XX:XX:XX:XX
nl80211: Assoc Req IEs - hexdump(len=175): 00 06 4d 79 53 53 49 44 01 08 82 84 8b 96 24 30 48 6c 32 04 0c 12 18 60 21 02 03 14 24 02 01 0d 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 2d 1a ad 01 1b ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 00 00 08 00 00 00 00 40 dd 1e 00 90 4c 33 ad 01 1b ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 00 00 10 00 00 dd 07 00 50 f2 02 00 01 00 dd 1d 00 90 4c 5c 02 01 0a 00 08 07 01 0f 00 00 00 00 00 01 0a 01 01 01 01 0f 00 00 00 00 00
wlan0: Event ASSOC (0) received
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: associated
STA included RSN IE in (Re)AssocReq
  New STA
ap_sta_add: register ap_handle_timer timeout for XX:XX:XX:XX:XX:XX (300 seconds - ap_max_inactivity)
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x60 flags_or=0x0 flags_and=0xfffffff1 authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX WPA: event 1 notification
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ab4c0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
IEEE 802.1X: Ignore STA - 802.1X not enabled or forced for WPS
wlan0: STA XX:XX:XX:XX:XX:XX WPA: start authentication
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ab4c0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x60 flags_or=0x0 flags_and=0xfffffffe authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.1X: unauthorizing port
WPA: XX:XX:XX:XX:XX:XX WPA_PTK_GROUP entering state IDLE
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state AUTHENTICATION
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state AUTHENTICATION2
WPA: Re-initialize GMK/Counter on first station
Get randomness: len=32 entropy=1
GMK - hexdump(len=32): [REMOVED]
Get randomness: len=32 entropy=0
Key Counter - hexdump(len=32): [REMOVED]
Get randomness: len=32 entropy=0
GTK - hexdump(len=32): [REMOVED]
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=2 addr=0xaaaae74752b0 key_idx=1 set_tx=1 seq_len=0 key_len=32
nl80211: KEY_DATA - hexdump(len=32): [REMOVED]
   broadcast key
Get randomness: len=32 entropy=0
WPA: Assign ANonce - hexdump(len=32): 6a b9 dd 6f 9b 3f 9a 19 e5 ed f1 0f bf fd 39 c0 6b d0 59 53 f8 42 df a0 e6 91 fb 20 55 05 08 d7
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITPSK
Searching a PSK for XX:XX:XX:XX:XX:XX prev_psk=(nil)
Searching a PSK for XX:XX:XX:XX:XX:XX prev_psk=(nil)
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state PTKSTART
wlan0: STA XX:XX:XX:XX:XX:XX WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=0 keyidx=0 encr=0)
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
WPA: Use EAPOL-Key timeout of 1000 ms (retry counter 1)
wlan0: hostapd_new_assoc_sta: reschedule ap_handle_timer timeout for XX:XX:XX:XX:XX:XX (300 seconds - ap_max_inactivity)
nl80211: Event message available
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
nl80211: Delete station XX:XX:XX:XX:XX:XX
wlan0: Event DISASSOC (1) received
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: disassociated
wlan0: STA XX:XX:XX:XX:XX:XX WPA: event 2 notification
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ab4c0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state DISCONNECTED
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ab4c0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x0 flags_or=0x0 flags_and=0xfffffffe authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.1X: unauthorizing port
nl80211: sta_remove -> DEL_STATION wlan0 XX:XX:XX:XX:XX:XX --> 0 (Success)
hostapd_ht_operation_update current operation mode=0x0
hostapd_ht_operation_update new operation mode=0x0 changes=0
ap_free_sta: cancel ap_handle_timer for XX:XX:XX:XX:XX:XX
nl80211: Event message available
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
nl80211: New station XX:XX:XX:XX:XX:XX
nl80211: Assoc Req IEs - hexdump(len=175): 00 06 4d 79 53 53 49 44 01 08 82 84 8b 96 24 30 48 6c 32 04 0c 12 18 60 21 02 03 14 24 02 01 0d 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 2d 1a ad 01 1b ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 00 00 08 00 00 00 00 40 dd 1e 00 90 4c 33 ad 01 1b ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 00 00 10 00 00 dd 07 00 50 f2 02 00 01 00 dd 1d 00 90 4c 5c 02 01 0a 00 08 07 01 0f 00 00 00 00 00 01 0a 01 01 01 01 0f 00 00 00 00 00
wlan0: Event ASSOC (0) received
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: associated
STA included RSN IE in (Re)AssocReq
  New STA
ap_sta_add: register ap_handle_timer timeout for XX:XX:XX:XX:XX:XX (300 seconds - ap_max_inactivity)
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x60 flags_or=0x0 flags_and=0xfffffff1 authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX WPA: event 1 notification
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ab7b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
IEEE 802.1X: Ignore STA - 802.1X not enabled or forced for WPS
wlan0: STA XX:XX:XX:XX:XX:XX WPA: start authentication
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ab7b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x60 flags_or=0x0 flags_and=0xfffffffe authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.1X: unauthorizing port
WPA: XX:XX:XX:XX:XX:XX WPA_PTK_GROUP entering state IDLE
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state AUTHENTICATION
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state AUTHENTICATION2
Get randomness: len=32 entropy=1
WPA: Assign ANonce - hexdump(len=32): 79 e8 0e 49 6a 56 0d 46 2a c8 4d 21 a8 70 ee ba 13 8e 17 ee 37 3b 69 e8 f9 ea 0c 6c 49 15 12 41
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITPSK
Searching a PSK for XX:XX:XX:XX:XX:XX prev_psk=(nil)
Searching a PSK for XX:XX:XX:XX:XX:XX prev_psk=(nil)
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state PTKSTART
wlan0: STA XX:XX:XX:XX:XX:XX WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=0 keyidx=0 encr=0)
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
WPA: Use EAPOL-Key timeout of 1000 ms (retry counter 1)
wlan0: hostapd_new_assoc_sta: reschedule ap_handle_timer timeout for XX:XX:XX:XX:XX:XX (300 seconds - ap_max_inactivity)
nl80211: Event message available
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
nl80211: Delete station XX:XX:XX:XX:XX:XX
wlan0: Event DISASSOC (1) received
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: disassociated
wlan0: STA XX:XX:XX:XX:XX:XX WPA: event 2 notification
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ab7b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state DISCONNECTED
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ab7b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x0 flags_or=0x0 flags_and=0xfffffffe authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.1X: unauthorizing port
nl80211: sta_remove -> DEL_STATION wlan0 XX:XX:XX:XX:XX:XX --> 0 (Success)
hostapd_ht_operation_update current operation mode=0x0
hostapd_ht_operation_update new operation mode=0x0 changes=0
ap_free_sta: cancel ap_handle_timer for XX:XX:XX:XX:XX:XX
nl80211: Event message available
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
nl80211: New station XX:XX:XX:XX:XX:XX
nl80211: Assoc Req IEs - hexdump(len=175): 00 06 4d 79 53 53 49 44 01 08 82 84 8b 96 24 30 48 6c 32 04 0c 12 18 60 21 02 03 14 24 02 01 0d 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 2d 1a ad 01 1b ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 00 00 08 00 00 00 00 40 dd 1e 00 90 4c 33 ad 01 1b ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 00 00 10 00 00 dd 07 00 50 f2 02 00 01 00 dd 1d 00 90 4c 5c 02 01 0a 00 08 07 01 0f 00 00 00 00 00 01 0a 01 01 01 01 0f 00 00 00 00 00
wlan0: Event ASSOC (0) received
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: associated
STA included RSN IE in (Re)AssocReq
  New STA
ap_sta_add: register ap_handle_timer timeout for XX:XX:XX:XX:XX:XX (300 seconds - ap_max_inactivity)
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x60 flags_or=0x0 flags_and=0xfffffff1 authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX WPA: event 1 notification
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164abaa0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
IEEE 802.1X: Ignore STA - 802.1X not enabled or forced for WPS
wlan0: STA XX:XX:XX:XX:XX:XX WPA: start authentication
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164abaa0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x60 flags_or=0x0 flags_and=0xfffffffe authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.1X: unauthorizing port
WPA: XX:XX:XX:XX:XX:XX WPA_PTK_GROUP entering state IDLE
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state AUTHENTICATION
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state AUTHENTICATION2
Get randomness: len=32 entropy=1
WPA: Assign ANonce - hexdump(len=32): 9b 0d 6a 31 e5 21 2e 6a d5 cc f0 85 cc 9e d9 ff 07 79 4f 00 15 2a d3 04 2e 7b c5 54 13 36 d7 09
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITPSK
Searching a PSK for XX:XX:XX:XX:XX:XX prev_psk=(nil)
Searching a PSK for XX:XX:XX:XX:XX:XX prev_psk=(nil)
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state PTKSTART
wlan0: STA XX:XX:XX:XX:XX:XX WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=0 keyidx=0 encr=0)
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
WPA: Use EAPOL-Key timeout of 1000 ms (retry counter 1)
wlan0: hostapd_new_assoc_sta: reschedule ap_handle_timer timeout for XX:XX:XX:XX:XX:XX (300 seconds - ap_max_inactivity)
nl80211: Event message available
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
nl80211: Delete station XX:XX:XX:XX:XX:XX
wlan0: Event DISASSOC (1) received
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: disassociated
wlan0: STA XX:XX:XX:XX:XX:XX WPA: event 2 notification
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164abaa0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state DISCONNECTED
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164abaa0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x0 flags_or=0x0 flags_and=0xfffffffe authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.1X: unauthorizing port
nl80211: sta_remove -> DEL_STATION wlan0 XX:XX:XX:XX:XX:XX --> 0 (Success)
hostapd_ht_operation_update current operation mode=0x0
hostapd_ht_operation_update new operation mode=0x0 changes=0
ap_free_sta: cancel ap_handle_timer for XX:XX:XX:XX:XX:XX
nl80211: Event message available
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
nl80211: New station XX:XX:XX:XX:XX:XX
nl80211: Assoc Req IEs - hexdump(len=175): 00 06 4d 79 53 53 49 44 01 08 82 84 8b 96 24 30 48 6c 32 04 0c 12 18 60 21 02 03 14 24 02 01 0d 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 2d 1a ad 01 1b ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 00 00 08 00 00 00 00 40 dd 1e 00 90 4c 33 ad 01 1b ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 00 00 10 00 00 dd 07 00 50 f2 02 00 01 00 dd 1d 00 90 4c 5c 02 01 0a 00 08 07 01 0f 00 00 00 00 00 01 0a 01 01 01 01 0f 00 00 00 00 00
wlan0: Event ASSOC (0) received
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: associated
STA included RSN IE in (Re)AssocReq
  New STA
ap_sta_add: register ap_handle_timer timeout for XX:XX:XX:XX:XX:XX (300 seconds - ap_max_inactivity)
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x60 flags_or=0x0 flags_and=0xfffffff1 authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX WPA: event 1 notification
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164abd90 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
IEEE 802.1X: Ignore STA - 802.1X not enabled or forced for WPS
wlan0: STA XX:XX:XX:XX:XX:XX WPA: start authentication
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164abd90 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x60 flags_or=0x0 flags_and=0xfffffffe authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.1X: unauthorizing port
WPA: XX:XX:XX:XX:XX:XX WPA_PTK_GROUP entering state IDLE
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state AUTHENTICATION
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state AUTHENTICATION2
Get randomness: len=32 entropy=1
WPA: Assign ANonce - hexdump(len=32): f5 8e 58 f0 6d 2c a5 ec b0 1e 86 4c be bc 56 d2 5f ee 54 82 cf 08 03 a1 e7 aa 58 c7 2c bc 72 f1
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITPSK
Searching a PSK for XX:XX:XX:XX:XX:XX prev_psk=(nil)
Searching a PSK for XX:XX:XX:XX:XX:XX prev_psk=(nil)
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state PTKSTART
wlan0: STA XX:XX:XX:XX:XX:XX WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=0 keyidx=0 encr=0)
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
WPA: Use EAPOL-Key timeout of 1000 ms (retry counter 1)
wlan0: hostapd_new_assoc_sta: reschedule ap_handle_timer timeout for XX:XX:XX:XX:XX:XX (300 seconds - ap_max_inactivity)
nl80211: Event message available
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
nl80211: Delete station XX:XX:XX:XX:XX:XX
wlan0: Event DISASSOC (1) received
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: disassociated
wlan0: STA XX:XX:XX:XX:XX:XX WPA: event 2 notification
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164abd90 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state DISCONNECTED
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164abd90 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x0 flags_or=0x0 flags_and=0xfffffffe authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.1X: unauthorizing port
nl80211: sta_remove -> DEL_STATION wlan0 XX:XX:XX:XX:XX:XX --> 0 (Success)
hostapd_ht_operation_update current operation mode=0x0
hostapd_ht_operation_update new operation mode=0x0 changes=0
ap_free_sta: cancel ap_handle_timer for XX:XX:XX:XX:XX:XX
nl80211: Event message available
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
nl80211: New station XX:XX:XX:XX:XX:XX
nl80211: Assoc Req IEs - hexdump(len=175): 00 06 4d 79 53 53 49 44 01 08 82 84 8b 96 24 30 48 6c 32 04 0c 12 18 60 21 02 03 14 24 02 01 0d 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 2d 1a ad 01 1b ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 00 00 08 00 00 00 00 40 dd 1e 00 90 4c 33 ad 01 1b ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 00 00 10 00 00 dd 07 00 50 f2 02 00 01 00 dd 1d 00 90 4c 5c 02 01 0a 00 08 07 01 0f 00 00 00 00 00 01 0a 01 01 01 01 0f 00 00 00 00 00
wlan0: Event ASSOC (0) received
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: associated
STA included RSN IE in (Re)AssocReq
  New STA
ap_sta_add: register ap_handle_timer timeout for XX:XX:XX:XX:XX:XX (300 seconds - ap_max_inactivity)
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x60 flags_or=0x0 flags_and=0xfffffff1 authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX WPA: event 1 notification
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ac5b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
IEEE 802.1X: Ignore STA - 802.1X not enabled or forced for WPS
wlan0: STA XX:XX:XX:XX:XX:XX WPA: start authentication
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ac5b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x60 flags_or=0x0 flags_and=0xfffffffe authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.1X: unauthorizing port
WPA: XX:XX:XX:XX:XX:XX WPA_PTK_GROUP entering state IDLE
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state AUTHENTICATION
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state AUTHENTICATION2
Get randomness: len=32 entropy=1
WPA: Assign ANonce - hexdump(len=32): 49 b5 a5 de 09 86 ae 7d 24 89 59 1a 01 0d 5e 90 aa ba ec 84 bf 8c d7 40 3a 56 d9 d7 92 b9 01 72
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITPSK
Searching a PSK for XX:XX:XX:XX:XX:XX prev_psk=(nil)
Searching a PSK for XX:XX:XX:XX:XX:XX prev_psk=(nil)
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state PTKSTART
wlan0: STA XX:XX:XX:XX:XX:XX WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=0 keyidx=0 encr=0)
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
WPA: Use EAPOL-Key timeout of 1000 ms (retry counter 1)
wlan0: hostapd_new_assoc_sta: reschedule ap_handle_timer timeout for XX:XX:XX:XX:XX:XX (300 seconds - ap_max_inactivity)
wlan0: STA XX:XX:XX:XX:XX:XX WPA: EAPOL-Key timeout
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state PTKSTART
wlan0: STA XX:XX:XX:XX:XX:XX WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=0 keyidx=0 encr=0)
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 02
WPA: Use EAPOL-Key timeout of 1000 ms (retry counter 2)
wlan0: STA XX:XX:XX:XX:XX:XX WPA: EAPOL-Key timeout
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state PTKSTART
wlan0: STA XX:XX:XX:XX:XX:XX WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=0 keyidx=0 encr=0)
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 03
WPA: Use EAPOL-Key timeout of 1000 ms (retry counter 3)
wlan0: Event EAPOL_RX (23) received
IEEE 802.1X: 121 bytes from XX:XX:XX:XX:XX:XX
   IEEE 802.1X: version=1 type=3 length=117
WPA: RX EAPOL data - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 56 5d 36 ca 7f cf d8 66 2e 9c 83 cd 64 2b b5 6b 00 16 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00
WPA: Received EAPOL-Key from XX:XX:XX:XX:XX:XX key_info=0x10a type=2 mic_len=16 key_data_length=22
WPA: EAPOL-Key header (ending before Key MIC) - hexdump(len=77): 02 01 0a 00 00 00 00 00 00 00 00 00 01 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: EAPOL-Key Key MIC - hexdump(len=16): 56 5d 36 ca 7f cf d8 66 2e 9c 83 cd 64 2b b5 6b
WPA: Received Key Nonce - hexdump(len=32): 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b
WPA: Received Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
wlan0: STA XX:XX:XX:XX:XX:XX WPA: received EAPOL-Key frame (2/4 Pairwise)
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state PTKCALCNEGOTIATING
Searching a PSK for XX:XX:XX:XX:XX:XX prev_psk=(nil)
WPA: PTK derivation using PRF(SHA1)
WPA: PTK derivation - A1=aa:bb:cc:dd:ee:ff A2=XX:XX:XX:XX:XX:XX
WPA: Nonce1 - hexdump(len=32): 49 b5 a5 de 09 86 ae 7d 24 89 59 1a 01 0d 5e 90 aa ba ec 84 bf 8c d7 40 3a 56 d9 d7 92 b9 01 72
WPA: Nonce2 - hexdump(len=32): 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: KEK - hexdump(len=16): [REMOVED]
WPA: TK - hexdump(len=16): [REMOVED]
WPA: EAPOL-Key MIC using HMAC-SHA1
Searching a PSK for XX:XX:XX:XX:XX:XX prev_psk=0xaaab164a634c
wlan0: STA XX:XX:XX:XX:XX:XX WPA: invalid MIC in msg 2/4 of 4-Way Handshake
wlan0: AP-STA-POSSIBLE-PSK-MISMATCH XX:XX:XX:XX:XX:XX
wlan0: Event EAPOL_RX (23) received
IEEE 802.1X: 121 bytes from XX:XX:XX:XX:XX:XX
   IEEE 802.1X: version=1 type=3 length=117
WPA: RX EAPOL data - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4e b4 d9 1d cf 2f fd 99 8d 61 ff 2e fe 1b 9e 67 00 16 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00
WPA: Received EAPOL-Key from XX:XX:XX:XX:XX:XX key_info=0x10a type=2 mic_len=16 key_data_length=22
WPA: EAPOL-Key header (ending before Key MIC) - hexdump(len=77): 02 01 0a 00 00 00 00 00 00 00 00 00 01 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: EAPOL-Key Key MIC - hexdump(len=16): 4e b4 d9 1d cf 2f fd 99 8d 61 ff 2e fe 1b 9e 67
WPA: Received Key Nonce - hexdump(len=32): 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b
WPA: Received Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
wlan0: STA XX:XX:XX:XX:XX:XX WPA: received EAPOL-Key 2/4 Pairwise with unexpected replay counter
received replay counter - hexdump(len=8): 00 00 00 00 00 00 00 01
wlan0: Event EAPOL_RX (23) received
IEEE 802.1X: 121 bytes from XX:XX:XX:XX:XX:XX
   IEEE 802.1X: version=1 type=3 length=117
WPA: RX EAPOL data - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0 c2 1e 2d 93 0c d8 7f 2c 47 87 94 86 11 d4 42 00 16 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00
WPA: Received EAPOL-Key from XX:XX:XX:XX:XX:XX key_info=0x10a type=2 mic_len=16 key_data_length=22
WPA: EAPOL-Key header (ending before Key MIC) - hexdump(len=77): 02 01 0a 00 00 00 00 00 00 00 00 00 01 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: EAPOL-Key Key MIC - hexdump(len=16): a0 c2 1e 2d 93 0c d8 7f 2c 47 87 94 86 11 d4 42
WPA: Received Key Nonce - hexdump(len=32): 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b
WPA: Received Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
wlan0: STA XX:XX:XX:XX:XX:XX WPA: received EAPOL-Key 2/4 Pairwise with unexpected replay counter
received replay counter - hexdump(len=8): 00 00 00 00 00 00 00 01
wlan0: Event EAPOL_RX (23) received
IEEE 802.1X: 121 bytes from XX:XX:XX:XX:XX:XX
   IEEE 802.1X: version=1 type=3 length=117
WPA: RX EAPOL data - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 21 84 8e a7 9c 34 7c bb de ba 3b a9 d5 6d ed 31 00 16 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00
WPA: Received EAPOL-Key from XX:XX:XX:XX:XX:XX key_info=0x10a type=2 mic_len=16 key_data_length=22
WPA: EAPOL-Key header (ending before Key MIC) - hexdump(len=77): 02 01 0a 00 00 00 00 00 00 00 00 00 01 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: EAPOL-Key Key MIC - hexdump(len=16): 21 84 8e a7 9c 34 7c bb de ba 3b a9 d5 6d ed 31
WPA: Received Key Nonce - hexdump(len=32): 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b
WPA: Received Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
wlan0: STA XX:XX:XX:XX:XX:XX WPA: received EAPOL-Key 2/4 Pairwise with unexpected replay counter
received replay counter - hexdump(len=8): 00 00 00 00 00 00 00 01
wlan0: Event EAPOL_RX (23) received
IEEE 802.1X: 121 bytes from XX:XX:XX:XX:XX:XX
   IEEE 802.1X: version=1 type=3 length=117
WPA: RX EAPOL data - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 68 5b 26 49 a1 99 97 cf 93 f8 07 ff b3 dc 48 03 00 16 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00
WPA: Received EAPOL-Key from XX:XX:XX:XX:XX:XX key_info=0x10a type=2 mic_len=16 key_data_length=22
WPA: EAPOL-Key header (ending before Key MIC) - hexdump(len=77): 02 01 0a 00 00 00 00 00 00 00 00 00 01 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: EAPOL-Key Key MIC - hexdump(len=16): 68 5b 26 49 a1 99 97 cf 93 f8 07 ff b3 dc 48 03
WPA: Received Key Nonce - hexdump(len=32): 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b
WPA: Received Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
wlan0: STA XX:XX:XX:XX:XX:XX WPA: received EAPOL-Key 2/4 Pairwise with unexpected replay counter
received replay counter - hexdump(len=8): 00 00 00 00 00 00 00 01
wlan0: Event EAPOL_RX (23) received
IEEE 802.1X: 121 bytes from XX:XX:XX:XX:XX:XX
   IEEE 802.1X: version=1 type=3 length=117
WPA: RX EAPOL data - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 02 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 93 55 1d 50 6a f0 66 c1 db e9 3f 28 a2 5a ac 00 16 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00
WPA: Received EAPOL-Key from XX:XX:XX:XX:XX:XX key_info=0x10a type=2 mic_len=16 key_data_length=22
WPA: EAPOL-Key header (ending before Key MIC) - hexdump(len=77): 02 01 0a 00 00 00 00 00 00 00 00 00 02 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: EAPOL-Key Key MIC - hexdump(len=16): f9 93 55 1d 50 6a f0 66 c1 db e9 3f 28 a2 5a ac
WPA: Received Key Nonce - hexdump(len=32): 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b
WPA: Received Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 02
wlan0: STA XX:XX:XX:XX:XX:XX WPA: received EAPOL-Key 2/4 Pairwise with unexpected replay counter
received replay counter - hexdump(len=8): 00 00 00 00 00 00 00 02
wlan0: Event EAPOL_RX (23) received
IEEE 802.1X: 121 bytes from XX:XX:XX:XX:XX:XX
   IEEE 802.1X: version=1 type=3 length=117
WPA: RX EAPOL data - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 03 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d4 77 41 dd 7f 7f 8d d2 4a 45 0c 9f 50 78 57 a6 00 16 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00
WPA: Received EAPOL-Key from XX:XX:XX:XX:XX:XX key_info=0x10a type=2 mic_len=16 key_data_length=22
WPA: EAPOL-Key header (ending before Key MIC) - hexdump(len=77): 02 01 0a 00 00 00 00 00 00 00 00 00 03 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: EAPOL-Key Key MIC - hexdump(len=16): d4 77 41 dd 7f 7f 8d d2 4a 45 0c 9f 50 78 57 a6
WPA: Received Key Nonce - hexdump(len=32): 60 8c cf b4 28 77 a1 6b d4 61 ad 46 76 29 a7 ee e8 9d 92 8c b7 74 66 82 b0 c3 8b 40 2e c5 62 7b
WPA: Received Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 03
wlan0: STA XX:XX:XX:XX:XX:XX WPA: received EAPOL-Key 2/4 Pairwise with unexpected replay counter
received replay counter - hexdump(len=8): 00 00 00 00 00 00 00 03
wlan0: STA XX:XX:XX:XX:XX:XX WPA: EAPOL-Key timeout
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state PTKSTART
wlan0: STA XX:XX:XX:XX:XX:XX WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=0 keyidx=0 encr=0)
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 04
WPA: Use EAPOL-Key timeout of 1000 ms (retry counter 4)
wlan0: STA XX:XX:XX:XX:XX:XX WPA: EAPOL-Key timeout
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state PTKSTART
wlan0: STA XX:XX:XX:XX:XX:XX WPA: PTKSTART: Retry limit 4 reached
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state DISCONNECT
wpa_sta_disconnect STA XX:XX:XX:XX:XX:XX (reason 2)
hostapd_wpa_auth_disconnect: WPA authenticator requests disconnect: STA XX:XX:XX:XX:XX:XX reason 2
wlan0: ap_sta_disconnect addr XX:XX:XX:XX:XX:XX reason=2
nl80211: sta_remove -> DEL_STATION wlan0 XX:XX:XX:XX:XX:XX --> 0 (Success)
wlan0: STA XX:XX:XX:XX:XX:XX WPA: event 3 notification
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ac5b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
wlan0: ap_sta_disconnect: reschedule ap_handle_timer timeout for XX:XX:XX:XX:XX:XX (5 seconds - AP_MAX_INACTIVITY_AFTER_DEAUTH)
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state DISCONNECTED
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ac5b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x0 flags_or=0x0 flags_and=0xfffffffe authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.1X: unauthorizing port
wlan0: Deauthentication callback for STA XX:XX:XX:XX:XX:XX
wlan0: Removing STA XX:XX:XX:XX:XX:XX from kernel driver
nl80211: sta_remove -> DEL_STATION wlan0 XX:XX:XX:XX:XX:XX --> 0 (Success)
wlan0: STA XX:XX:XX:XX:XX:XX MLME: MLME-DEAUTHENTICATE.indication(XX:XX:XX:XX:XX:XX, 2)
wlan0: STA XX:XX:XX:XX:XX:XX MLME: MLME-DELETEKEYS.request(XX:XX:XX:XX:XX:XX)
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ac5b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
nl80211: Event message available
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
nl80211: Delete station XX:XX:XX:XX:XX:XX
wlan0: Event DISASSOC (1) received
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: disassociated
wlan0: STA XX:XX:XX:XX:XX:XX WPA: event 2 notification
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ac5b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state DISCONNECTED
WPA: XX:XX:XX:XX:XX:XX WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=4 (wlan0) alg=0 addr=0xaaab164ac5b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=XX:XX:XX:XX:XX:XX
nl80211: set_key failed; err=-22 Invalid argument)
RSN: PTK removal from the driver failed
nl80211: Set STA flags - ifname=wlan0 addr=XX:XX:XX:XX:XX:XX total_flags=0x0 flags_or=0x0 flags_and=0xfffffffe authorized=0
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.1X: unauthorizing port
nl80211: sta_remove -> DEL_STATION wlan0 XX:XX:XX:XX:XX:XX --> 0 (Success)
hostapd_ht_operation_update current operation mode=0x0
hostapd_ht_operation_update new operation mode=0x0 changes=0
ap_free_sta: cancel ap_handle_timer for XX:XX:XX:XX:XX:XX
nl80211: Event message available
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
nl80211: Delete station XX:XX:XX:XX:XX:XX
wlan0: Event DISASSOC (1) received
wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: disassociated
Disassociation notification for unknown STA XX:XX:XX:XX:XX:XX
Signal 2 received - terminating
hostapd_interface_deinit_free(0xaaab164a25b0)
hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1
hostapd_interface_deinit(0xaaab164a25b0)
wlan0: interface state ENABLED->DISABLED
hostapd_bss_deinit: deinit bss wlan0
wlan0: Deauthenticate all stations
nl80211: sta_remove -> DEL_STATION wlan0 ff:ff:ff:ff:ff:ff --> 0 (Success)
wlan0: AP-DISABLED 
hostapd_cleanup(hapd=0xaaab164a3c00 (wlan0))
wlan0: CTRL-EVENT-TERMINATING 
hostapd_free_hapd_data(wlan0)
hostapd_interface_deinit_free: driver=0xaaaae750c678 drv_priv=0xaaab164a4ec0 -> hapd_deinit
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
nl80211: Disable Probe Request reporting nl_preq=0x888822239ec229e9
nl80211: Remove monitor interface: refcount=0
nl80211: Remove beacon (ifindex=4)
netlink: Operstate: ifindex=4 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
nl80211: Set mode ifindex 4 iftype 2 (STATION)
nl80211: Teardown AP(wlan0) - device_ap_sme=1 use_monitor=0
nl80211: Unsubscribe mgmt frames handle 0x888822239ec2dfa9 (AP teardown (dev SME))
hostapd_interface_free(0xaaab164a25b0)
hostapd_interface_free: free hapd 0xaaab164a3c00
hostapd_cleanup_iface(0xaaab164a25b0)
hostapd_cleanup_iface_partial(0xaaab164a25b0)
hostapd_cleanup_iface: free iface=0xaaab164a25b0

lubux

Anmeldungsdatum:
21. November 2012

Beiträge: 14382

Zitieren

15. Februar 2020 22:14

McAddress schrieb:

Auf einem Raspberry Pi 4 läuft als Betriebssystem Ubuntu Server 19.10.1 arm64 raspi3, die zum jetztigen Zeitpunkt neuste Version.

Das ist eine PI3-Version auf einem PI4? Evtl. kompilierst Du auf deinem PI4, den hostapd aus dem aktuellen source code.

McAddress

(Themenstarter)

Anmeldungsdatum:
15. Februar 2020

Beiträge: 8

Zitieren

15. Februar 2020 23:47

Vielen Dank für Deine Antwort. Die Ubuntu-Version heisst zwar "raspi3", ist aber für Pi3 und Pi4 bestimmt. Auf der Internetseite https://ubuntu.com/download/raspberry-pi kann man zwar entweder für den Pi3 oder für den Pi4 herunterladen, jedoch verbirgt sich hinter diesen beiden Links dieselbe Datei. hostapd war nicht mit enthalten, den habe ich nachträglich installiert (sudo apt install hostapd). Die Verion ist v2.9.

TomLu

Anmeldungsdatum:
23. August 2014

Beiträge: 603

Zitieren

16. Februar 2020 10:19

Abgesehen davon, dass ich es grundsätzlich nicht für eine gute Idee halte, nicht raspbian lite für solche Zwecke zu verwenden, sollte das aber vermutlich dennoch funktionieren. Du kannst Dein Setup ja mal mit meinem vergleichen, vielleicht ergeben sich Hinweise auf Ursachen für die Probleme: http://www.thlu.de//raspi-2wlan-ap.html

Ein Unterschied wird sein, dass ich das mit 2 WLAN-Devices beschrieben habe, was aber letztlich keinen großen Unterschied macht und sich lediglich aufs NAT auswirkt.

McAddress

(Themenstarter)

Anmeldungsdatum:
15. Februar 2020

Beiträge: 8

Zitieren

18. Februar 2020 15:03

Vielen Dank für Deine Antwort. Ich habe jetzt die Konfigurationsdatei entsprechend Deinem Link angepasst und hatte damit tatsächlich Erfolg. Schließlich habe ich schrittweise alles wieder zurückgeändert um dem Problem weiter auf die Spur zu kommen. Letztendlich hat sich herausgestellt, dass interessanterweise der Kanal den Unterschied macht. Mit Kanal 1 funktioniert es hervoragend. Wenn ich die gesamte Konfiguration unverändert lasse, und nur den Kanal auf 10 ändere, kommt es zu den beschriebenen Problemen.

lubux

Anmeldungsdatum:
21. November 2012

Beiträge: 14382

Zitieren

18. Februar 2020 15:26

McAddress schrieb:

Wenn ich die gesamte Konfiguration unverändert lasse, und nur den Kanal auf 10 ändere, kommt es zu den beschriebenen Problemen.

Versuch mal mit einem Linux-WLAN-Client, bei dem Du in der wpa_supplicant.conf-Datei den Kanal 10 _fest_ konfigurierst.

McAddress

(Themenstarter)

Anmeldungsdatum:
15. Februar 2020

Beiträge: 8

Zitieren

18. Februar 2020 17:03

Bei wpa_supplicant besteht dasselbe Problem. Mit Kanal 5 funktioniert es, mit Kanal 10 nicht. Ich weiß inzwischen, dass die Kanäle 1 und 5 funktionieren und die Kanäle 7 und 10 nicht. Scheint mir so als ob nur die niedrigeren Kanäle nutzbar sind.

McAddress

(Themenstarter)

Anmeldungsdatum:
15. Februar 2020

Beiträge: 8

Zitieren

18. Februar 2020 17:33

Ich habe jetzt die Kanäle im 2,4GHz-Band alle durchprobiert. Die Kanäle 1 bis 6 funktionieren, die Kanäle 7 bis 10 funktionieren nicht und die Kanäle 11 bis 13 funktionieren wieder.

lubux

Anmeldungsdatum:
21. November 2012

Beiträge: 14382

Zitieren

18. Februar 2020 18:33

McAddress schrieb:

Bei wpa_supplicant besteht dasselbe Problem. Mit Kanal 5 funktioniert es, mit Kanal 10 nicht. Ich weiß inzwischen, dass die Kanäle 1 und 5 funktionieren und die Kanäle 7 und 10 nicht. Scheint mir so als ob nur die niedrigeren Kanäle nutzbar sind.

Wie ist auf deinem Linux-WLAN-Client die Ausgabe von:

sudo iwlist wlan0 scan | grep -iE 'chan|freq|qual|sign'

(evtl. musst Du das Interface (hier wlan0) anpassen).

McAddress

(Themenstarter)

Anmeldungsdatum:
15. Februar 2020

Beiträge: 8

Zitieren

18. Februar 2020 18:56

Die Ausgabe zu

1	sudo iwlist wlan0 scan \| grep -iE 'chan\|freq\|qual\|sign'

ist bei mir

1	wlan0 Interface doesn't support scanning : Invalid exchange

Auch das finde ich ziemlich seltsam. Der Name "wlan0" ist richtig.

lubux

Anmeldungsdatum:
21. November 2012

Beiträge: 14382

Zitieren

18. Februar 2020 19:01

McAddress schrieb:

ist bei mir

Auf welchem Gerät und mit welchem OS hast Du iwlist ausgeführt?

McAddress

(Themenstarter)

Anmeldungsdatum:
15. Februar 2020

Beiträge: 8

Zitieren

18. Februar 2020 19:40

Ebenfalls auf einem Raspberry Pi 4 mit Ubuntu Server 19.10.1. Also identisch zu dem System, auf dem der Access Point laufen soll. Ansonsten habe ich nur ein Android Handy und ein Windows 10 Tablet zur Verfügung. Ich könnte es sonst noch mit einem anderen OS versuchen, z.B. Raspbian, aber auf derselben Hardware.

McAddress

(Themenstarter)

Anmeldungsdatum:
15. Februar 2020

Beiträge: 8

Zitieren

18. Februar 2020 21:07

Ich habe es jetzt noch mal mit Raspbian versucht. Hier ist das Ergebnis:

                    Channel:3
                    Frequency:2.422 GHz (Channel 3)
                    Quality=69/70  Signal level=-41 dBm  
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=39/70  Signal level=-71 dBm  
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=39/70  Signal level=-71 dBm  
                    Channel:36
                    Frequency:5.18 GHz (Channel 36)
                    Quality=55/70  Signal level=-55 dBm  
                    Channel:100
                    Frequency:5.5 GHz (Channel 100)
                    Quality=68/70  Signal level=-42 dBm  
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=70/70  Signal level=-31 dBm  
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=34/70  Signal level=-76 dBm  
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=34/70  Signal level=-76 dBm  
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=34/70  Signal level=-76 dBm  
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=40/70  Signal level=-70 dBm

lubux

Anmeldungsdatum:
21. November 2012

Beiträge: 14382

Zitieren

19. Februar 2020 09:20

McAddress schrieb:

Ich habe es jetzt noch mal mit Raspbian versucht. Hier ist das Ergebnis:

                   
                    Channel:36
                    Frequency:5.18 GHz (Channel 36)
                    Quality=55/70  Signal level=-55 dBm  
                    Channel:100
                    Frequency:5.5 GHz (Channel 100)
                    Quality=68/70  Signal level=-42 dBm

Konfiguriere dein Raspbian so, dass nur 2.4 GHz benutzt wird und in hostapd den Kanal 10, damit man sehen kann ob dieser beim Scannen gefunden wird.

Aber es stimmt schon, wegen der Abstimmung untereinander sollte man den Kanal 10 nicht verwenden, sondern nur die Kanäle 1 oder 6 oder 11(13).

« Vorherige1Nächste »

Antworten |

« Vorheriges Thema Nächstes Thema »