Ich habe schon wieder Probleme mit meinem Scanner. Ich verstehe es nicht. Das Ding lief, ich hatte gescannt, ist ein paar Monate her. Jetzt pack ich das Ding wieder aus, schließe an, er wird auch erkannt von Simplescan. Aber sobald ich den Scanvorgang starten will kommt die Fehlermeldung "Scannen fehlgeschlagen - Scanvorgang konnte nicht gestartet werden". Da ich so furchtbar ahnungslos bin, weiß ich nicht mal wo ich ansetzten könnte um das Problem einzugrenzen, geschweige denn die Ursache rauszufinden. Vielleicht hat jemand von euch eine Idee? System habe ich: Ubuntu 24.04.1 LTS Und der Scanner ist so ein kleines "Laserschwert" DSmobile DS - 640 von brother... Danke euch, Hanna
Scanner Brother DS-640 funktioniert plötzlich nicht mehr
|
Anmeldungsdatum: Beiträge: 41 |
|
||
|
Supporter, Wikiteam
Anmeldungsdatum: Beiträge: 10111 |
Dann beginn mal damit: Standard abfragen zur Analyse bei Scanner Problemen Da steht auch was von Codeblock und jede Zeile ist ein Befehl und muss einzeln ausgeführt werden Bitte die Terminalausgaben im Codeblock (mit 1. Befehl – 2. Ausgabe – 3. Prompt/Endezeichen) posten. |
||
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 41 |
hanna@Dellaptop20:~$ export SANE_DEBUG_DLL=255 && scanimage -L [12:16:49.385601] [sanei_debug] Setting debug level of dll to 255. [12:16:49.385881] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.2.1-debian [12:16:49.385954] [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [12:16:49.386007] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [12:16:49.386064] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [12:16:49.386269] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [12:16:49.386357] [dll] sane_init/read_config: reading dll.d/hplip [12:16:49.386400] [dll] add_backend: adding backend `hpaio' [12:16:49.386432] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/airscan [12:16:49.386467] [dll] sane_init/read_config: reading dll.d/airscan [12:16:49.386492] [dll] add_backend: adding backend `airscan' [12:16:49.386524] [dll] sane_init/read_dlld: done. [12:16:49.386557] [dll] sane_init/read_config: reading dll.conf [12:16:49.386592] [dll] add_backend: adding backend `net' [12:16:49.386611] [dll] add_backend: adding backend `abaton' [12:16:49.386627] [dll] add_backend: adding backend `agfafocus' [12:16:49.386641] [dll] add_backend: adding backend `apple' [12:16:49.386657] [dll] add_backend: adding backend `artec' [12:16:49.386671] [dll] add_backend: adding backend `artec_eplus48u' [12:16:49.386689] [dll] add_backend: adding backend `as6e' [12:16:49.386704] [dll] add_backend: adding backend `avision' [12:16:49.386719] [dll] add_backend: adding backend `bh' [12:16:49.386739] [dll] add_backend: adding backend `canon' [12:16:49.386755] [dll] add_backend: adding backend `canon630u' [12:16:49.386770] [dll] add_backend: adding backend `canon_dr' [12:16:49.386787] [dll] add_backend: adding backend `canon_lide70' [12:16:49.386803] [dll] add_backend: adding backend `cardscan' [12:16:49.386828] [dll] add_backend: adding backend `coolscan' [12:16:49.386846] [dll] add_backend: adding backend `coolscan3' [12:16:49.386864] [dll] add_backend: adding backend `dell1600n_net' [12:16:49.386880] [dll] add_backend: adding backend `dmc' [12:16:49.386896] [dll] add_backend: adding backend `epjitsu' [12:16:49.386913] [dll] add_backend: adding backend `epson2' [12:16:49.386928] [dll] add_backend: adding backend `epsonds' [12:16:49.386946] [dll] add_backend: adding backend `escl' [12:16:49.386962] [dll] add_backend: adding backend `fujitsu' [12:16:49.386978] [dll] add_backend: adding backend `genesys' [12:16:49.386994] [dll] add_backend: adding backend `gt68xx' [12:16:49.387009] [dll] add_backend: adding backend `hp' [12:16:49.387025] [dll] add_backend: adding backend `hp3500' [12:16:49.387041] [dll] add_backend: adding backend `hp3900' [12:16:49.387057] [dll] add_backend: adding backend `hp4200' [12:16:49.387082] [dll] add_backend: adding backend `hp5400' [12:16:49.387102] [dll] add_backend: adding backend `hp5590' [12:16:49.387165] [dll] add_backend: adding backend `hpljm1005' [12:16:49.387187] [dll] add_backend: adding backend `hpsj5s' [12:16:49.387208] [dll] add_backend: adding backend `hs2p' [12:16:49.387226] [dll] add_backend: adding backend `ibm' [12:16:49.387243] [dll] add_backend: adding backend `kodak' [12:16:49.387260] [dll] add_backend: adding backend `kodakaio' [12:16:49.387279] [dll] add_backend: adding backend `kvs1025' [12:16:49.387296] [dll] add_backend: adding backend `kvs20xx' [12:16:49.387313] [dll] add_backend: adding backend `kvs40xx' [12:16:49.387331] [dll] add_backend: adding backend `leo' [12:16:49.387352] [dll] add_backend: adding backend `lexmark' [12:16:49.387369] [dll] add_backend: adding backend `ma1509' [12:16:49.387386] [dll] add_backend: adding backend `magicolor' [12:16:49.387401] [dll] add_backend: adding backend `matsushita' [12:16:49.387418] [dll] add_backend: adding backend `microtek' [12:16:49.387436] [dll] add_backend: adding backend `microtek2' [12:16:49.387453] [dll] add_backend: adding backend `mustek' [12:16:49.387472] [dll] add_backend: adding backend `mustek_usb' [12:16:49.387493] [dll] add_backend: adding backend `mustek_usb2' [12:16:49.387514] [dll] add_backend: adding backend `nec' [12:16:49.387535] [dll] add_backend: adding backend `niash' [12:16:49.387576] [dll] add_backend: adding backend `pie' [12:16:49.387599] [dll] add_backend: adding backend `pieusb' [12:16:49.387617] [dll] add_backend: adding backend `pint' [12:16:49.387631] [dll] add_backend: adding backend `pixma' [12:16:49.387645] [dll] add_backend: adding backend `plustek' [12:16:49.387659] [dll] add_backend: adding backend `qcam' [12:16:49.387673] [dll] add_backend: adding backend `ricoh' [12:16:49.387687] [dll] add_backend: adding backend `ricoh2' [12:16:49.387701] [dll] add_backend: adding backend `rts8891' [12:16:49.387714] [dll] add_backend: adding backend `s9036' [12:16:49.387728] [dll] add_backend: adding backend `sceptre' [12:16:49.387742] [dll] add_backend: adding backend `sharp' [12:16:49.387756] [dll] add_backend: adding backend `sm3600' [12:16:49.387770] [dll] add_backend: adding backend `sm3840' [12:16:49.387783] [dll] add_backend: adding backend `snapscan' [12:16:49.387797] [dll] add_backend: adding backend `sp15c' [12:16:49.387811] [dll] add_backend: adding backend `tamarack' [12:16:49.387825] [dll] add_backend: adding backend `teco1' [12:16:49.387839] [dll] add_backend: adding backend `teco2' [12:16:49.387852] [dll] add_backend: adding backend `teco3' [12:16:49.387867] [dll] add_backend: adding backend `u12' [12:16:49.387880] [dll] add_backend: adding backend `umax' [12:16:49.387894] [dll] add_backend: adding backend `umax1220u' [12:16:49.387913] [dll] add_backend: adding backend `v4l' [12:16:49.387928] [dll] add_backend: adding backend `xerox_mfp' [12:16:49.387943] [dll] add_backend: adding backend `brother5' [12:16:49.387985] [dll] sane_get_devices [12:16:49.388003] [dll] load: searching backend `brother5' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.388018] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-brother5.so.1' [12:16:49.388045] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-brother5.so.1' [12:16:49.389904] [dll] init: initializing backend `brother5' [12:16:49.406020] [dll] init: backend `brother5' is version 1.0.1 [12:16:49.406081] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.406135] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [12:16:49.406188] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [12:16:49.406538] [dll] init: initializing backend `xerox_mfp' [12:16:49.417786] [dll] init: backend `xerox_mfp' is version 1.0.13 [12:16:49.418019] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.418039] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [12:16:49.418077] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory) [12:16:49.418103] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1' [12:16:49.418206] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory) [12:16:49.418219] [dll] load: trying to load `/usr/lib64/sane/libsane-v4l.so.1' [12:16:49.418247] [dll] load: couldn't open `/usr/lib64/sane/libsane-v4l.so.1' (No such file or directory) [12:16:49.418268] [dll] load: couldn't find backend `v4l' (No such file or directory) [12:16:49.418286] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.418300] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [12:16:49.418335] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [12:16:49.418621] [dll] init: initializing backend `umax1220u' [12:16:49.430515] [dll] init: backend `umax1220u' is version 1.0.2 [12:16:49.430554] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.430566] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [12:16:49.430590] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [12:16:49.431003] [dll] init: initializing backend `umax' [12:16:49.442356] [dll] init: backend `umax' is version 1.0.45 [12:16:49.442393] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.442409] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [12:16:49.442437] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [12:16:49.442783] [dll] init: initializing backend `u12' [12:16:49.452338] [dll] init: backend `u12' is version 1.0.0 [12:16:49.452367] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.452378] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [12:16:49.452407] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [12:16:49.452628] [dll] init: initializing backend `teco3' [12:16:49.453534] [dll] init: backend `teco3' is version 1.0.1 [12:16:49.453571] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.453593] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [12:16:49.453622] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [12:16:49.453937] [dll] init: initializing backend `teco2' [12:16:49.455548] [dll] init: backend `teco2' is version 1.0.10 [12:16:49.455605] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.455629] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [12:16:49.455664] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [12:16:49.456026] [dll] init: initializing backend `teco1' [12:16:49.457230] [dll] init: backend `teco1' is version 1.0.10 [12:16:49.457270] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.457289] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [12:16:49.457333] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [12:16:49.457606] [dll] init: initializing backend `tamarack' [12:16:49.458292] [dll] init: backend `tamarack' is version 1.0.0 [12:16:49.458334] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.458355] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [12:16:49.458396] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [12:16:49.458791] [dll] init: initializing backend `sp15c' [12:16:49.459207] [dll] init: backend `sp15c' is version 1.0.0 [12:16:49.459239] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.459274] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [12:16:49.459313] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [12:16:49.459787] [dll] init: initializing backend `snapscan' [12:16:49.472804] [dll] init: backend `snapscan' is version 1.4.53 [12:16:49.472833] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.472844] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [12:16:49.472876] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [12:16:49.473188] [dll] init: initializing backend `sm3840' [12:16:49.481544] [dll] init: backend `sm3840' is version 1.0.0 [12:16:49.481573] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.481594] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [12:16:49.481623] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [12:16:49.481942] [dll] init: initializing backend `sm3600' [12:16:49.490331] [dll] init: backend `sm3600' is version 1.0.6 [12:16:49.490364] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.490385] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [12:16:49.490417] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [12:16:49.490727] [dll] init: initializing backend `sharp' [12:16:49.491285] [dll] init: backend `sharp' is version 1.0.0 [12:16:49.491319] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.491348] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [12:16:49.491386] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [12:16:49.491602] [dll] init: initializing backend `sceptre' [12:16:49.492243] [dll] init: backend `sceptre' is version 1.0.10 [12:16:49.492298] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.492346] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [12:16:49.492401] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [12:16:49.492726] [dll] init: initializing backend `s9036' [12:16:49.493074] [dll] init: backend `s9036' is version 1.0.0 [12:16:49.493093] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.493143] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [12:16:49.493178] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [12:16:49.493451] [dll] init: initializing backend `rts8891' [12:16:49.502379] [dll] init: backend `rts8891' is version 1.0.2401 [12:16:49.502504] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.502522] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1' [12:16:49.502548] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1' [12:16:49.502830] [dll] init: initializing backend `ricoh2' [12:16:49.513563] [dll] init: backend `ricoh2' is version 1.0.0 [12:16:49.513604] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.513617] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [12:16:49.513645] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [12:16:49.514097] [dll] init: initializing backend `ricoh' [12:16:49.514526] [dll] init: backend `ricoh' is version 1.0.0 [12:16:49.514591] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.514612] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [12:16:49.514642] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [12:16:49.514847] [dll] init: initializing backend `qcam' [12:16:49.514897] [dll] init: backend `qcam' is version 1.0.0 [12:16:49.514919] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.514939] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [12:16:49.514966] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [12:16:49.515233] [dll] init: initializing backend `plustek' [12:16:49.524470] [dll] init: backend `plustek' is version 1.0.0 [12:16:49.524506] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.524524] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [12:16:49.524550] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [12:16:49.524886] [dll] init: initializing backend `pixma' [12:16:49.534070] [dll] init: backend `pixma' is version 1.0.28 [12:16:50.055177] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:50.055212] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' [12:16:50.055235] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory) [12:16:50.055250] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1' [12:16:50.055266] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory) [12:16:50.055278] [dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1' [12:16:50.055294] [dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory) [12:16:50.055306] [dll] load: couldn't find backend `pint' (No such file or directory) [12:16:50.055319] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:50.055331] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1' [12:16:50.055354] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1' [12:16:50.055657] [dll] init: initializing backend `pieusb' [12:16:50.070229] [dll] init: backend `pieusb' is version 1.0.1 [12:16:50.070284] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:50.070345] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [12:16:50.070425] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [12:16:50.071285] [dll] init: initializing backend `pie' [12:16:50.072485] [dll] init: backend `pie' is version 1.0.9 [12:16:50.072516] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:50.072537] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [12:16:50.072565] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [12:16:50.072898] [dll] init: initializing backend `niash' [12:16:50.086077] [dll] init: backend `niash' is version 1.0.1 [12:16:50.086177] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:50.086207] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [12:16:50.086244] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [12:16:50.086621] [dll] init: initializing backend `nec' [12:16:50.086985] [dll] init: backend `nec' is version 1.0.0 [12:16:50.087008] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:50.087028] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [12:16:50.087072] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [12:16:50.087469] [dll] init: initializing backend `mustek_usb2' [12:16:50.087505] [dll] init: backend `mustek_usb2' is version 1.0.10 [12:16:50.096116] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:50.096141] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [12:16:50.096170] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [12:16:50.096506] [dll] init: initializing backend `mustek_usb' [12:16:50.105035] [dll] init: backend `mustek_usb' is version 1.0.18 [12:16:50.105062] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:50.105073] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [12:16:50.105093] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [12:16:50.105489] [dll] init: initializing backend `mustek' [12:16:50.106222] [dll] init: backend `mustek' is version 1.0.138 [12:16:50.106241] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:50.106252] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [12:16:50.106275] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [12:16:50.106511] [dll] init: initializing backend `microtek2' [12:16:50.107141] [dll] init: backend `microtek2' is version 1.0.0 [12:16:50.107175] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:50.107198] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [12:16:50.107224] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [12:16:50.107462] [dll] init: initializing backend `microtek' [12:16:50.108058] [dll] init: backend `microtek' is version 1.0.0 [12:16:50.108084] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:50.108103] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [12:16:50.108151] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [12:16:50.108429] [dll] init: initializing backend `matsushita' [12:16:50.109868] [dll] init: backend `matsushita' is version 1.0.7 [12:16:50.109915] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:50.109934] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [12:16:50.109965] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [12:16:50.112559] [dll] init: initializing backend `magicolor' [12:16:50.122231] [dll] init: backend `magicolor' is version 1.0.1 [12:16:51.639048] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:51.639175] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [12:16:51.639280] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [12:16:51.639809] [dll] init: initializing backend `ma1509' [12:16:51.668631] [dll] init: backend `ma1509' is version 1.0.3 [12:16:51.668706] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:51.668810] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [12:16:51.668882] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [12:16:51.669727] [dll] init: initializing backend `lexmark' [12:16:51.692177] [dll] init: backend `lexmark' is version 1.0.32 [12:16:51.692365] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:51.692390] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [12:16:51.692438] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [12:16:51.692765] [dll] init: initializing backend `leo' [12:16:51.693695] [dll] init: backend `leo' is version 1.0.11 [12:16:51.693730] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:51.693761] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1' [12:16:51.693806] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1' [12:16:51.694182] [dll] init: initializing backend `kvs40xx' [12:16:51.709272] [dll] init: backend `kvs40xx' is version 1.0.1 [12:16:51.710092] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:51.710180] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [12:16:51.710237] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [12:16:51.711348] [dll] init: initializing backend `kvs20xx' [12:16:51.729983] [dll] init: backend `kvs20xx' is version 1.0.2 [12:16:51.731331] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:51.731374] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [12:16:51.731408] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [12:16:51.732080] [dll] init: initializing backend `kvs1025' [12:16:51.742282] [dll] init: backend `kvs1025' is version 1.0.5 [12:16:51.742312] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:51.742325] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [12:16:51.742353] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [12:16:51.742797] [dll] init: initializing backend `kodakaio' [12:16:51.754625] [dll] init: backend `kodakaio' is version 1.0.3 [12:16:53.686214] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.686280] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [12:16:53.686338] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [12:16:53.686782] [dll] init: initializing backend `kodak' [12:16:53.686841] [dll] init: backend `kodak' is version 1.0.7 [12:16:53.687259] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.687293] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [12:16:53.687331] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [12:16:53.687680] [dll] init: initializing backend `ibm' [12:16:53.688307] [dll] init: backend `ibm' is version 1.0.0 [12:16:53.688343] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.688366] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [12:16:53.688400] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [12:16:53.688801] [dll] init: initializing backend `hs2p' [12:16:53.690099] [dll] init: backend `hs2p' is version 1.0.0 [12:16:53.690165] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.690201] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [12:16:53.690231] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [12:16:53.690527] [dll] init: initializing backend `hpsj5s' [12:16:53.690625] [dll] init: backend `hpsj5s' is version 1.0.3 [12:16:53.690651] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.690670] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [12:16:53.690700] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [12:16:53.691082] [dll] init: initializing backend `hpljm1005' [12:16:53.708804] [dll] init: backend `hpljm1005' is version 1.0.1 [12:16:53.708855] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.708885] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [12:16:53.708919] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [12:16:53.709491] [dll] init: initializing backend `hp5590' [12:16:53.723450] [dll] init: backend `hp5590' is version 1.0.8 [12:16:53.723489] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.723517] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [12:16:53.723552] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [12:16:53.723981] [dll] init: initializing backend `hp5400' [12:16:53.734223] [dll] init: backend `hp5400' is version 1.0.3 [12:16:53.734261] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.734284] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [12:16:53.734317] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [12:16:53.734597] [dll] init: initializing backend `hp4200' [12:16:53.749359] [dll] init: backend `hp4200' is version 1.0.0 [12:16:53.749420] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.749462] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [12:16:53.749505] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [12:16:53.752008] [dll] init: initializing backend `hp3900' [12:16:53.766170] [dll] init: backend `hp3900' is version 1.0.0 [12:16:53.766280] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.766318] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [12:16:53.766375] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [12:16:53.766922] [dll] init: initializing backend `hp3500' [12:16:53.779342] [dll] init: backend `hp3500' is version 1.0.0 [12:16:53.779376] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.779405] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [12:16:53.779435] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [12:16:53.779845] [dll] init: initializing backend `hp' [12:16:53.779895] [dll] init: backend `hp' is version 1.0.8 [12:16:53.790571] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.790606] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [12:16:53.790645] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [12:16:53.791071] [dll] init: initializing backend `gt68xx' [12:16:53.800592] [dll] init: backend `gt68xx' is version 1.0.84 [12:16:53.801083] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.801133] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [12:16:53.801171] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [12:16:53.801841] [dll] init: initializing backend `genesys' [12:16:53.814134] [dll] init: backend `genesys' is version 1.0.0 [12:16:53.814352] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.814373] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [12:16:53.814406] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [12:16:53.814692] [dll] init: initializing backend `fujitsu' [12:16:53.814739] [dll] init: backend `fujitsu' is version 1.0.139 [12:16:53.826773] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.826826] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1' [12:16:53.826931] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1' [12:16:53.848412] [dll] init: initializing backend `escl' [12:16:53.848468] [dll] init: backend `escl' is version 1.0.0 [12:16:53.864810] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.864860] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [12:16:53.864906] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [12:16:53.865541] [dll] init: initializing backend `epsonds' [12:16:53.880748] [dll] init: backend `epsonds' is version 1.0.0 [12:16:53.896149] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:53.896199] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [12:16:53.896246] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [12:16:53.896791] [dll] init: initializing backend `epson2' [12:16:53.912271] [dll] init: backend `epson2' is version 1.0.124 [12:16:54.913257] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:54.913298] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [12:16:54.913338] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [12:16:54.913705] [dll] init: initializing backend `epjitsu' [12:16:54.913745] [dll] init: backend `epjitsu' is version 1.0.33 [12:16:54.927972] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:54.928009] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [12:16:54.928071] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [12:16:54.928974] [dll] init: initializing backend `dmc' [12:16:54.929693] [dll] init: backend `dmc' is version 1.0.0 [12:16:54.929741] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:54.929780] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [12:16:54.929820] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [12:16:54.930288] [dll] init: initializing backend `dell1600n_net' [12:16:54.930314] [dll] init: backend `dell1600n_net' is version 1.0.0 [12:16:55.230901] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.230948] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [12:16:55.230988] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [12:16:55.231582] [dll] init: initializing backend `coolscan3' [12:16:55.249516] [dll] init: backend `coolscan3' is version 1.0.0 [12:16:55.250477] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.250571] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [12:16:55.250651] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [12:16:55.251916] [dll] init: initializing backend `coolscan' [12:16:55.252848] [dll] init: backend `coolscan' is version 1.0.0 [12:16:55.252892] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.252923] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [12:16:55.252963] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [12:16:55.253548] [dll] init: initializing backend `cardscan' [12:16:55.269832] [dll] init: backend `cardscan' is version 1.0.3 [12:16:55.270252] [dll] load: searching backend `canon_lide70' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.270300] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1' [12:16:55.270354] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1' [12:16:55.271040] [dll] init: initializing backend `canon_lide70' [12:16:55.284659] [dll] init: backend `canon_lide70' is version 1.0.0 [12:16:55.284699] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.284725] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [12:16:55.284774] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [12:16:55.285331] [dll] init: initializing backend `canon_dr' [12:16:55.285433] [dll] init: backend `canon_dr' is version 1.0.64 [12:16:55.299816] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.299846] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [12:16:55.299868] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [12:16:55.300313] [dll] init: initializing backend `canon630u' [12:16:55.312719] [dll] init: backend `canon630u' is version 1.0.1 [12:16:55.312750] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.312763] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [12:16:55.312788] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [12:16:55.313100] [dll] init: initializing backend `canon' [12:16:55.313355] [dll] init: backend `canon' is version 1.0.0 [12:16:55.313377] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.313399] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [12:16:55.313429] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [12:16:55.313652] [dll] init: initializing backend `bh' [12:16:55.314142] [dll] init: backend `bh' is version 1.0.4 [12:16:55.314166] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.314185] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [12:16:55.314218] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [12:16:55.314541] [dll] init: initializing backend `avision' [12:16:55.332872] [dll] init: backend `avision' is version 1.0.297 [12:16:55.342046] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.342084] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [12:16:55.342135] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [12:16:55.342484] [dll] init: initializing backend `as6e' [12:16:55.342545] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.342563] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [12:16:55.342597] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [12:16:55.342928] [dll] init: initializing backend `artec_eplus48u' [12:16:55.352050] [dll] init: backend `artec_eplus48u' is version 1.0.0 [12:16:55.352168] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.352192] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [12:16:55.352227] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [12:16:55.352685] [dll] init: initializing backend `artec' [12:16:55.353418] [dll] init: backend `artec' is version 1.0.0 [12:16:55.353448] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.353465] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [12:16:55.353494] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [12:16:55.353953] [dll] init: initializing backend `apple' [12:16:55.354669] [dll] init: backend `apple' is version 1.0.0 [12:16:55.354699] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.354716] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [12:16:55.354745] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [12:16:55.355051] [dll] init: initializing backend `agfafocus' [12:16:55.355523] [dll] init: backend `agfafocus' is version 1.0.0 [12:16:55.355552] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.355570] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [12:16:55.355599] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [12:16:55.355953] [dll] init: initializing backend `abaton' [12:16:55.356460] [dll] init: backend `abaton' is version 1.0.0 [12:16:55.356482] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.356499] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [12:16:55.356530] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [12:16:55.356935] [dll] init: initializing backend `net' [12:16:55.361166] [dll] init: backend `net' is version 1.2.1 [12:16:55.361208] [dll] load: searching backend `airscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.361226] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-airscan.so.1' [12:16:55.361274] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-airscan.so.1' [12:16:55.361837] [dll] init: initializing backend `airscan' [12:16:55.367494] [dll] init: backend `airscan' is version 1.0.0 [12:16:55.377528] [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:55.377570] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [12:16:55.377623] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [12:16:55.379022] [dll] init: initializing backend `hpaio' [12:16:55.380531] [dll] init: backend `hpaio' is version 1.0.0 [12:16:55.406313] [dll] sane_get_devices: found 1 devices device `brother5:bus3;dev1' is a Brother DS-640 USB scanner [12:16:55.406375] [dll] sane_exit: exiting [12:16:55.406393] [dll] sane_exit: calling backend `brother5's exit function [12:16:55.406843] [dll] sane_exit: calling backend `xerox_mfp's exit function [12:16:55.407026] [dll] sane_exit: calling backend `umax1220u's exit function [12:16:55.407210] [dll] sane_exit: calling backend `umax's exit function [12:16:55.407364] [dll] sane_exit: calling backend `u12's exit function [12:16:55.407520] [dll] sane_exit: calling backend `teco3's exit function [12:16:55.407641] [dll] sane_exit: calling backend `teco2's exit function [12:16:55.407736] [dll] sane_exit: calling backend `teco1's exit function [12:16:55.407816] [dll] sane_exit: calling backend `tamarack's exit function [12:16:55.407891] [dll] sane_exit: calling backend `sp15c's exit function [12:16:55.407971] [dll] sane_exit: calling backend `snapscan's exit function [12:16:55.408056] [dll] sane_exit: calling backend `sm3840's exit function [12:16:55.408170] [dll] sane_exit: calling backend `sm3600's exit function [12:16:55.408256] [dll] sane_exit: calling backend `sharp's exit function [12:16:55.408329] [dll] sane_exit: calling backend `sceptre's exit function [12:16:55.408405] [dll] sane_exit: calling backend `s9036's exit function [12:16:55.408474] [dll] sane_exit: calling backend `rts8891's exit function [12:16:55.408551] [dll] sane_exit: calling backend `ricoh2's exit function [12:16:55.408652] [dll] sane_exit: calling backend `ricoh's exit function [12:16:55.408725] [dll] sane_exit: calling backend `qcam's exit function [12:16:55.408790] [dll] sane_exit: calling backend `plustek's exit function [12:16:55.408867] [dll] sane_exit: calling backend `pixma's exit function [12:16:55.408961] [dll] sane_exit: calling backend `pieusb's exit function [12:16:55.409041] [dll] sane_exit: calling backend `pie's exit function [12:16:55.409136] [dll] sane_exit: calling backend `niash's exit function [12:16:55.409212] [dll] sane_exit: calling backend `nec's exit function [12:16:55.409285] [dll] sane_exit: calling backend `mustek_usb2's exit function [12:16:55.409363] [dll] sane_exit: calling backend `mustek_usb's exit function [12:16:55.409442] [dll] sane_exit: calling backend `mustek's exit function [12:16:55.409518] [dll] sane_exit: calling backend `microtek2's exit function [12:16:55.409595] [dll] sane_exit: calling backend `microtek's exit function [12:16:55.409675] [dll] sane_exit: calling backend `matsushita's exit function [12:16:55.409744] [dll] sane_exit: calling backend `magicolor's exit function [12:16:55.409811] [dll] sane_exit: calling backend `ma1509's exit function [12:16:55.409895] [dll] sane_exit: calling backend `lexmark's exit function [12:16:55.409987] [dll] sane_exit: calling backend `leo's exit function [12:16:55.410060] [dll] sane_exit: calling backend `kvs40xx's exit function [12:16:55.410151] [dll] sane_exit: calling backend `kvs20xx's exit function [12:16:55.410232] [dll] sane_exit: calling backend `kvs1025's exit function [12:16:55.410304] [dll] sane_exit: calling backend `kodakaio's exit function [12:16:55.410386] [dll] sane_exit: calling backend `kodak's exit function [12:16:55.410461] [dll] sane_exit: calling backend `ibm's exit function [12:16:55.410533] [dll] sane_exit: calling backend `hs2p's exit function [12:16:55.410608] [dll] sane_exit: calling backend `hpsj5s's exit function [12:16:55.410703] [dll] sane_exit: calling backend `hpljm1005's exit function [12:16:55.410779] [dll] sane_exit: calling backend `hp5590's exit function [12:16:55.410848] [dll] sane_exit: calling backend `hp5400's exit function [12:16:55.410927] [dll] sane_exit: calling backend `hp4200's exit function [12:16:55.410997] [dll] sane_exit: calling backend `hp3900's exit function [12:16:55.411072] [dll] sane_exit: calling backend `hp3500's exit function [12:16:55.411159] [dll] sane_exit: calling backend `hp's exit function [12:16:55.411234] [dll] sane_exit: calling backend `gt68xx's exit function [12:16:55.411322] [dll] sane_exit: calling backend `genesys's exit function [12:16:55.411544] [dll] sane_exit: calling backend `fujitsu's exit function [12:16:55.411613] [dll] sane_exit: calling backend `escl's exit function [12:16:55.412813] [dll] sane_exit: calling backend `epsonds's exit function [12:16:55.412914] [dll] sane_exit: calling backend `epson2's exit function [12:16:55.412988] [dll] sane_exit: calling backend `epjitsu's exit function [12:16:55.413064] [dll] sane_exit: calling backend `dmc's exit function [12:16:55.413193] [dll] sane_exit: calling backend `dell1600n_net's exit function [12:16:55.413258] [dll] sane_exit: calling backend `coolscan3's exit function [12:16:55.413313] [dll] sane_exit: calling backend `coolscan's exit function [12:16:55.413374] [dll] sane_exit: calling backend `cardscan's exit function [12:16:55.413444] [dll] sane_exit: calling backend `canon_lide70's exit function [12:16:55.413503] [dll] sane_exit: calling backend `canon_dr's exit function [12:16:55.413571] [dll] sane_exit: calling backend `canon630u's exit function [12:16:55.413634] [dll] sane_exit: calling backend `canon's exit function [12:16:55.413697] [dll] sane_exit: calling backend `bh's exit function [12:16:55.413751] [dll] sane_exit: calling backend `avision's exit function [12:16:55.413842] [dll] sane_exit: calling backend `artec_eplus48u's exit function [12:16:55.413904] [dll] sane_exit: calling backend `artec's exit function [12:16:55.413970] [dll] sane_exit: calling backend `apple's exit function [12:16:55.414025] [dll] sane_exit: calling backend `agfafocus's exit function [12:16:55.414079] [dll] sane_exit: calling backend `abaton's exit function [12:16:55.414151] [dll] sane_exit: calling backend `net's exit function [12:16:55.414784] [dll] sane_exit: calling backend `airscan's exit function [12:16:55.417457] [dll] sane_exit: calling backend `hpaio's exit function [12:16:55.418622] [dll] sane_exit: finished hanna@Dellaptop20:~$ |
||
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 41 |
hanna@Dellaptop20:~$ sudo dpkg -l *sane* | grep ii [sudo] Passwort für hanna: ii libsane-common 1.2.1-7build4 all API library for scanners -- documentation and support files ii libsane-dev:amd64 1.2.1-7build4 amd64 API development library for scanners [development files] ii libsane-hpaio:amd64 3.23.12+dfsg0-0ubuntu5 amd64 HP SANE backend for multi-function peripherals ii libsane1:amd64 1.2.1-7build4 amd64 API library for scanners ii sane-airscan 0.99.29-0ubuntu4 amd64 SANE backend for AirScan (eSCL) and WSD document scanner ii sane-utils 1.2.1-7build4 amd64 API library for scanners -- utilities hanna@Dellaptop20:~$ |
||
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 41 |
hanna@Dellaptop20:~$ sudo dpkg -l libusb* | grep ii ii libusb-0.1-4:amd64 2:0.1.12-35build1 amd64 userspace USB programming library ii libusb-1.0-0:amd64 2:1.0.27-1 amd64 userspace USB programming library ii libusb-1.0-0-dev:amd64 2:1.0.27-1 amd64 userspace USB programming library development files ii libusb-1.0-doc 2:1.0.27-1 all documentation for userspace USB programming ii libusbmuxd6:amd64 2.0.2-4build3 amd64 USB multiplexor daemon for iPhone and iPod Touch devices - library hanna@Dellaptop20:~$ hanna@Dellaptop20:~$ sudo dpkg -l | egrep Brother ii brscan5 1.3.1-0 amd64 Brother Scanner Driver brscan5 ii printer-driver-brlaser 6-3build2 amd64 printer driver for (some) Brother laser printers ii printer-driver-ptouch 1.7-1build2 amd64 printer driver Brother P-touch label printers hanna@Dellaptop20:~$ hanna@Dellaptop20:~$ sudo dpkg -l | egrep hp ii hplip 3.23.12+dfsg0-0ubuntu5 amd64 HP Linux Printing and Imaging System (HPLIP) ii hplip-data 3.23.12+dfsg0-0ubuntu5 all HP Linux Printing and Imaging - data files rc hplip-gui 3.21.12+dfsg0-1 all HP Linux Printing and Imaging - GUI utilities (Qt-based) ii libhpmud0:amd64 3.23.12+dfsg0-0ubuntu5 amd64 HP Multi-Point Transport Driver (hpmud) run-time libraries ii libsane-hpaio:amd64 3.23.12+dfsg0-0ubuntu5 amd64 HP SANE backend for multi-function peripherals ii printer-driver-hpcups 3.23.12+dfsg0-0ubuntu5 amd64 HP Linux Printing and Imaging - CUPS Raster driver (hpcups) ii printer-driver-postscript-hp 3.23.12+dfsg0-0ubuntu5 amd64 HP Printers PostScript Descriptions ii python3-launchpadlib 1.11.0-6 all Launchpad web services client library (Python 3) hanna@Dellaptop20:~$ hanna@Dellaptop20:~$ sudo dpkg -l | egrep 'iscan*|esci-*|epson' hanna@Dellaptop20:~$ hanna@Dellaptop20:~$ sudo dpkg -l | egrep 'scangear*|cnij*' hanna@Dellaptop20:~$ hanna@Dellaptop20:~$ sudo updatedb && locate libsane-smfp.so sudo: updatedb: Befehl nicht gefunden hanna@Dellaptop20:~$ hanna@Dellaptop20:~$ systemctl --no-pager status sane* hanna@Dellaptop20:~$ hanna@Dellaptop20:~$ hp-info -i HP Linux Imaging and Printing System (ver. 3.23.12) Device Information Utility ver. 5.2 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. HP Linux Imaging and Printing System (ver. 3.23.12) System Tray Status Service ver. 2.0 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. warning: GUI Modules PyQt4 and PyQt5 are not installed error: hp-systray requires Qt4 GUI and DBus support. Exiting. warning: Unable to connect to dbus. Is hp-systray running? hp:/usb/DeskJet_2700_series?serial=CN12F6F2F2 error: Unable to communicate with device (code=12): hp:/usb/DeskJet_2700_series?serial=CN12F6F2F2 error: Error opening device (Device not found). Device Parameters (dynamic data): Parameter Value(s) ---------------------------- ---------------------------------------------------------- back-end hp cups-printers ['DeskJet_2700'] cups-uri hp:/usb/DeskJet_2700_series?serial=CN12F6F2F2 dev-file device-state -1 device-uri hp:/usb/DeskJet_2700_series?serial=CN12F6F2F2 deviceid error-state 101 host is-hp True panel 0 panel-line1 panel-line2 port 1 scan-uri hpaio:/usb/DeskJet_2700_series?serial=CN12F6F2F2 serial CN12F6F2F2 status-code 5002 status-desc Model Parameters (static data): Parameter Value(s) ---------------------------- ---------------------------------------------------------- align-type 15 clean-type 0 color-cal-type 0 copy-type 0 embedded-server-type 1 family-class ['PyramidRefresh17'] fax-type 0 fw-download False icon hp_deskjet_f4200.png io-mfp-mode 1 io-mode 1 io-support 10 job-storage 0 linefeed-cal-type 0 model DeskJet_2700_series model-ui HP Deskjet 2700 Series model1 HP DeskJet 2700 All-in-One Printer series model2 HP DeskJet Ink Advantage 2700 All-in-One Printer series monitor-type 0 panel-check-type 0 pcard-type 0 plugin 0 plugin-reason 0 power-settings 0 pq-diag-type 0 r-type 0 scan-src 1 scan-type 9 status-battery-check 0 status-dynamic-counters 0 status-type 10 support-released True support-subtype 2202411 support-type 2 support-ver 3.20.4 tech-class ['PyramidRefresh17'] tech-subclass ['Normal'] tech-type 2 usb-pid 6227 usb-vid 1008 wifi-config 3 Done. hanna@Dellaptop20:~$ |
||
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 41 |
mein letzter Beitrag wird nicht dargestellt? Woran kann das liegen? Da steht "Dieser Beitrag ist verborgen. Entweder muss er von Moderatoren aktiviert werden oder er wurde explizit von Moderatoren verborgen. " Was heißt das? |
||
|
Supporter
Anmeldungsdatum: Beiträge: 3751 |
Das heisst - abwarten und Tee trinken. |
||
|
Anmeldungsdatum: Beiträge: 2171 Wohnort: dahoam |
[gekürzt auf das Wesentliche] hanna@Dellaptop20:~$ export SANE_DEBUG_DLL=255 && scanimage -L [12:16:49.385601] [sanei_debug] Setting debug level of dll to 255. [12:16:49.385881] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.2.1-debian [12:16:49.385954] [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [12:16:49.386007] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [12:16:49.386064] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d> [12:16:49.386557] [dll] sane_init/read_config: reading dll.conf [12:16:49.387943] [dll] add_backend: adding backend `brother5' [12:16:49.387985] [dll] sane_get_devices [12:16:49.388003] [dll] load: searching backend `brother5' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.388018] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-brother5.so.1' [12:16:49.388045] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-brother5.so.1' [12:16:49.389904] [dll] init: initializing backend `brother5' [12:16:49.406020] [dll] init: backend `brother5' is version 1.0.1 [12:16:49.406081] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [12:16:49.406135] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [12:16:49.406188] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [12:16:55.406313] [dll] sane_get_devices: found 1 devices device `brother5:bus3;dev1' is a Brother DS-640 USB scanner [12:16:55.406375] [dll] sane_exit: exiting [12:16:55.406393] [dll] sane_exit: calling backend `brother5's exit function [12:16:55.414151] [dll] sane_exit: calling backend `net's exit function [12:16:55.418622] [dll] sane_exit: finished hanna@Dellaptop20:~$ Jo, schaut gut aus. Brother ist geladen und meldet: Ready and waiting. Ich würde jetzt mal die Berechtigungen schauen - schick' mal bitte ein ls -l /dev/scanner id sudo scanimage # rührt sich was bei diesem Befehl? Wird eine Bild-Datei file.png angelegt bei "sudo scanimage -o file.png"? lsusb -tv ... hm ... /dev/scanner scheint's u.U. nicht mehr zu geben ... Schau bitte auch mal in die Brother-Wikiseite, ob da evtl. was fehlt. |
||
|
Anmeldungsdatum: Beiträge: 11695 |
|||
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 41 |
Wenn ich das eingebe: hanna@Dellaptop20:~$ sudo scanimage -o file.png scanimage: rounded value of br-x from 215.9 to 215.88 scanimage: rounded value of br-y from 355.6 to 355.567 hanna@Dellaptop20:~$ startet er einen Scanvorgang, und legt auch die Datei an. Was bedeutet dass denn jetzt? Warum funktioniert das hier, und von Simplescan aus nicht? Was kann das Problem sein? |
||
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 41 |
hanna@Dellaptop20:~$ lsusb -tv
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=ehci-pci/2p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 001: Dev 002, If 0, Class=Hub, Driver=hub/8p, 480M
ID 8087:8001 Intel Corp. Integrated Hub
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/11p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 002: Dev 009, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
|__ Port 005: Dev 004, If 0, Class=Video, Driver=uvcvideo, 480M
ID 064e:9209 Suyin Corp.
|__ Port 005: Dev 004, If 1, Class=Video, Driver=uvcvideo, 480M
ID 064e:9209 Suyin Corp.
|__ Port 006: Dev 005, If 0, Class=Wireless, Driver=btusb, 12M
ID 8087:07dc Intel Corp. Bluetooth wireless interface
|__ Port 006: Dev 005, If 1, Class=Wireless, Driver=btusb, 12M
ID 8087:07dc Intel Corp. Bluetooth wireless interface
|__ Port 008: Dev 006, If 0, Class=Vendor Specific Class, Driver=rtsx_usb, 480M
ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
/: Bus 003.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/4p, 5000M
ID 1d6b:0003 Linux Foundation 3.0 root hub
|__ Port 001: Dev 006, If 0, Class=Vendor Specific Class, Driver=[none], 5000M
ID 04f9:0468 Brother Industries, Ltd
|__ Port 001: Dev 006, If 1, Class=Vendor Specific Class, Driver=[none], 5000M
ID 04f9:0468 Brother Industries, Ltd
hanna@Dellaptop20:~$
|
||
|
Anmeldungsdatum: Beiträge: 11695 |
...und
? |
||
|
Anmeldungsdatum: Beiträge: 11695 |
|||
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 41 |
|||
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 41 |
das habe ich eben auch noch gemacht. Neu gestartet und nochmal getestet. Nach wie vor findet er unter Simplescan zwar den Scanner, bringt aber die Fehlermeldung "Scanvorgang konnte nicht gestartet werden". Über das Terminal mit dem Befehl "scanimage" scannt er jedoch, und legt auch eine Datei an. Also prinzipiell läuft das Ding, nur nicht so luxuriös... ;-/ |
