ubuntuusers.de

Hallo zusammen,

Ich möchte dezent darauf hinweisen, daß die Reihenfolge, in der die snd Treiber geladen werden, evtl. eine Auswirkung haben, ob die Hauptsoundkarte verwendet wird von pulseaudio.

Dazu gibt in /etc/modprobe.d/alsa-base.conf alle Soundkarten mit einem "-2" index zu versehen, die nicht an erster Stelle stehen sollen.

Schwieriger wird es, wenn die Soundkarten den gleichen Treiber verwenden. Unter https://alsa.opensrc.org/MultipleUSBAudioDevices gibt es Hinweise, daß man IDs für die entspr. Soundkarte setzen kann (oder module Namen). Ob das für alle Soundkartentreiber identisch ist, weiß ich allerdings noch nicht.

Auf meinem System hat jedenfalls "HDMI" index 0 und die eigentliche Soundkarte index 1 bekommen. Ich könnte mir vorstellen, daß pulseaudio damit Probleme hat.

Der TO hat nämlich die gleichen Geräte wie ich (ist ja auch ein Renoir, also nicht verwunderlich)

Audio:
  Device-1: AMD driver: snd_hda_intel 
  Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor driver: N/A 
  Device-3: AMD Family 17h HD Audio driver: snd_hda_intel 
  Sound Server: ALSA v: k5.8.0-26-generic 

Der AMD ACPI Treiber scheint ein Problem zu haben. Den zu "entfernen" soll das Problem z.T. (mglw. geht das interne MIC dann nicht mehr) heilen. Nicht auf meinem Mist gewachsen. Andere haben auch schon herumprobiert, testen kann ich selbst das nicht.

@ realsuamor

bitte Teste mal in der /etc/default/grub mit

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash snd-pci-acp3x.blacklist=yes"

nicht Vergessen

sudo update-grub

und die Ausgabe wieder von

dmesg | egrep -i "alsa|snd|hdmi|generic"
lspci -nnk | grep -A3 Audio

P.s.

HDAJackRetask solltest du erst mal wieder entfernen 😉

Sein Thread hast Du gesehen? https://forum.ubuntuusers.de/topic/ausgabegeraet-verschwindet-bei-hdmi-anschluss/

Mit dem jetzigen Kernel würde

lspci -nnk | grep -A3 Audio

nichts bringen.

marant. schrieb:

Sein Thread hast Du gesehen? https://forum.ubuntuusers.de/topic/ausgabegeraet-verschwindet-bei-hdmi-anschluss/

Mit dem jetzigen Kernel würde

lspci -nnk | grep -A3 Audio

nichts bringen.

Doch doch 😉 Mal machen lassen,er hat auch noch den 5.8er Kernel. Er hat die Hardware und etwas Erfahrung.

Gruß Stephan

Kellerkind_2009 schrieb:

@ realsuamor

bitte Teste mal in der /etc/default/grub mit

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash snd-pci-acp3x.blacklist=yes"

der Treiber kennt den Parameter ".blacklist" nicht:

[    5.272226] snd_pci_acp3x: unknown parameter 'blacklist' ignored
[    5.272384] snd_pci_acp3x 0000:05:00.5: enabling device (0000 -> 0002)
[    5.280233] snd_pci_acp3x 0000:05:00.5: Invalid ACP audio mode : 1

HDAJackRetask solltest du erst mal wieder entfernen 😉

Done.

Ich werde das blacklisten von dem acpi Treiber in der modprobe.d vornehmen und wieder berichten.

sudo pluma /etc/modprobe.de/alsa-base.conf
# blacklist acpi renoir driver
blacklist snd_pci_acp3x
# ...

(nach reboot)

sudo dmesg|egrep -i "alsa|snd|hdmi|generic"
[    0.000000] Linux version 5.8.18-050818-generic (kernel@kathleen) (gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, GNU ld (GNU Binutils for Ubuntu) 2.35.1) #202011011237 SMP Sun Nov 1 12:40:15 UTC 2020
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.18-050818-generic root=UUID=ce1726d0-8292-4527-99e2-ea4a075e018f ro quiet splash iommu=pt vt.handoff=1
[    0.065277] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.18-050818-generic root=UUID=ce1726d0-8292-4527-99e2-ea4a075e018f ro quiet splash iommu=pt vt.handoff=1
[    0.390284] ... generic registers:      6
[    0.427311] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.695854] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.077779] PPP generic driver version 2.4.2
[    1.078002] ehci-platform: EHCI generic platform driver
[    1.078016] ohci-platform: OHCI generic platform driver
[    1.239585]     BOOT_IMAGE=/boot/vmlinuz-5.8.18-050818-generic
[    1.341548] usb usb1: Manufacturer: Linux 5.8.18-050818-generic xhci-hcd
[    1.343048] usb usb2: Manufacturer: Linux 5.8.18-050818-generic xhci-hcd
[    1.346437] usb usb3: Manufacturer: Linux 5.8.18-050818-generic xhci-hcd
[    1.347948] usb usb4: Manufacturer: Linux 5.8.18-050818-generic xhci-hcd
[    1.643904] hid-generic 0018:04F3:307A.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1203:00 04F3:307A] on i2c-ELAN1203:00
[    1.696220] checking generic (d0000000 7e9000) vs hw (d0000000 10000000)
[    2.380898] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.660205] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.816818] hid-generic 0003:1532:0050.0002: input,hidraw1: USB HID v1.11 Mouse [Razer Razer Naga Hex V2] on usb-0000:05:00.3-2/input0
[    2.880315] hid-generic 0003:1532:0050.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer Naga Hex V2] on usb-0000:05:00.3-2/input1
[    2.943900] hid-generic 0003:1532:0050.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Naga Hex V2] on usb-0000:05:00.3-2/input2
[    2.947733] hid-generic 0003:1A86:E040.0005: hiddev0,hidraw4: USB HID v1.00 Device [HID 1a86:e040] on usb-0000:05:00.3-3/input0
[    5.633210] snd_rn_pci_acp3x 0000:05:00.5: enabling device (0000 -> 0002)
[    5.678141] asus_wmi: ASUS WMI generic driver loaded
[    5.701489] snd_hda_intel 0000:05:00.1: enabling device (0000 -> 0002)
[    5.701576] snd_hda_intel 0000:05:00.1: Handle vga_switcheroo audio client
[    5.701676] snd_hda_intel 0000:05:00.6: enabling device (0000 -> 0002)
[    5.707815] snd_hda_intel 0000:05:00.1: bound 0000:05:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    5.708276] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card0/input18
[    5.781516] usbcore: registered new interface driver snd-usb-audio
[    5.788497] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    5.788506] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.788507] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    5.788508] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    5.788508] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    5.788509] snd_hda_codec_realtek hdaudioC1D0:      Headset Mic=0x19
[    5.788510] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    5.853435] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1/input23
[    5.999422] acp_pdm_mach acp_pdm_mach.0: snd_soc_register_card(acp) failed: -517
[    6.551293] Generic FE-GE Realtek PHY r8169-200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)

und

lspci -nnk | grep -A3 Audio
05:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:1637]
	Subsystem: ASUSTeK Computer Inc. Device [1043:16df]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
--
05:00.5 Multimedia controller [0480]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/FireFlight/Renoir Audio Processor [1022:15e2] (rev 01)
	Subsystem: Device [1e21:1043]
	Kernel driver in use: snd_rn_pci_acp3x
	Kernel modules: snd_pci_acp3x, snd_rn_pci_acp3x
05:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) HD Audio Controller [1022:15e3]
	DeviceName: HD Audio Controller
	Subsystem: ASUSTeK Computer Inc. Family 17h (Models 10h-1fh) HD Audio Controller [1043:1e21]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
06:00.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 81)

Also ACPI ist wohl immer noch kaputt und an den Soundausgängen bzw. Soundeingängen ändert sich nichts. Der Treiber erkennt demnach auch nicht das Einstöpseln des Kopfhörers. Sound über Gamepad tut immer noch einwandfrei (nicht anders zu erwarten).

Allerdings hat sich doch die Treibersituation geändert, denn der andere ACP Treiber ist nun in Benutzung (zuvor waren beide unbenutzt):

sudo lsmod|grep acp
snd_acp3x_rn           16384  2
snd_acp3x_pdm_dma      16384  1
snd_soc_core          278528  3 snd_acp3x_rn,snd_soc_dmic,snd_acp3x_pdm_dma
snd_pcm               118784  12 snd_hda_codec_hdmi,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_compress,snd_soc_core,snd_hda_core,snd_acp3x_pdm_dma,snd_pcm_dmaengine
snd_rn_pci_acp3x       20480  0
ucsi_acpi              16384  0
typec_ucsi             32768  1 ucsi_acpi

Der Treiber meldet keine Fehlermeldung. "517" ist nur ein "Defer", da lag ich jetzt wohl falsch. Es könnte also sein, daß ACP noch die Karte gefunden hat.

Da das aber mit pulseaudio nicht weiterhilft, habe ich noch die log-Ausgabe von pulseaudio angehängt, da hagelt es zwar an Fehlermeldungen, aber soweit ich das sehe nichts relevantes zum eigtl. Problem.

cat /var/log/syslog|grep pulse
Nov 24 09:33:17 lnyg-srk mate-settings-d[2399]: pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed
Nov 24 09:33:17 lnyg-srk mate-settings-d[2399]: message repeated 3 times: [ pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed]
Nov 24 09:33:22 lnyg-srk mate-settings-d[2399]: pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed
Nov 24 09:33:22 lnyg-srk mate-settings-d[2399]: message repeated 3 times: [ pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed]
Nov 24 20:30:44 lnyg-srk systemd[1308]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 20:30:44 lnyg-srk systemd[1308]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 20:30:44 lnyg-srk systemd[1302]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 20:30:44 lnyg-srk systemd[1302]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 20:30:44 lnyg-srk systemd[1302]: pulseaudio.service: Scheduled restart job, restart counter is at 1.
Nov 24 20:30:44 lnyg-srk systemd[1360]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 20:30:44 lnyg-srk systemd[1360]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 20:30:44 lnyg-srk systemd[1302]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 20:30:44 lnyg-srk systemd[1302]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 20:30:44 lnyg-srk systemd[1302]: pulseaudio.service: Scheduled restart job, restart counter is at 2.
Nov 24 20:30:44 lnyg-srk systemd[1427]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 20:30:44 lnyg-srk systemd[1427]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 20:30:44 lnyg-srk systemd[1302]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 20:30:44 lnyg-srk systemd[1302]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 20:30:44 lnyg-srk systemd[1302]: pulseaudio.service: Scheduled restart job, restart counter is at 3.
Nov 24 20:30:44 lnyg-srk systemd[1430]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 20:30:44 lnyg-srk systemd[1430]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 20:30:44 lnyg-srk systemd[1302]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 20:30:44 lnyg-srk systemd[1302]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 20:30:45 lnyg-srk systemd[1302]: pulseaudio.service: Scheduled restart job, restart counter is at 4.
Nov 24 20:30:45 lnyg-srk systemd[1491]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 20:30:45 lnyg-srk systemd[1491]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 20:30:45 lnyg-srk systemd[1302]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 20:30:45 lnyg-srk systemd[1302]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 20:30:45 lnyg-srk systemd[1302]: pulseaudio.service: Scheduled restart job, restart counter is at 5.
Nov 24 20:30:45 lnyg-srk systemd[1302]: pulseaudio.service: Start request repeated too quickly.
Nov 24 20:30:45 lnyg-srk systemd[1302]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 20:30:45 lnyg-srk systemd[1302]: pulseaudio.socket: Failed with result 'service-start-limit-hit'.
Nov 24 20:30:49 lnyg-srk autojack[1309]:     cp = subprocess.run(["/usr/bin/pulseaudio", "-k"],
Nov 24 20:30:49 lnyg-srk autojack[1309]: PermissionError: [Errno 13] Permission denied: '/usr/bin/pulseaudio'
Nov 24 20:30:53 lnyg-srk dbus-daemon[790]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.72' (uid=1000 pid=1928 comm="/usr/bin/pulseaudio --daemonize=no --log-target=jo")
Nov 24 20:30:56 lnyg-srk indicator-sound[2523]: volume-control-pulse.vala:744: Unable to connect to dbus server at 'unix:path=/run/user/1000/pulse/dbus-socket': Verbindung ist gescheitert: Datei oder Verzeichnis nicht gefunden
Nov 24 20:30:58 lnyg-srk pulseaudio[1928]: After module unload, module 'module-null-sink' was still loaded!
Nov 24 20:30:58 lnyg-srk systemd[1922]: pulseaudio.service: Succeeded.
Nov 24 20:30:59 lnyg-srk mate-settings-d[2441]: pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed
Nov 24 20:30:59 lnyg-srk mate-settings-d[2441]: pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed
Nov 24 20:31:00 lnyg-srk indicator-sound[2523]: volume-control-pulse.vala:744: Unable to connect to dbus server at 'unix:path=/run/user/1000/pulse/dbus-socket': Verbindung ist gescheitert: Datei oder Verzeichnis nicht gefunden
Nov 24 20:31:04 lnyg-srk mate-settings-d[2441]: pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed
Nov 24 20:31:04 lnyg-srk mate-settings-d[2441]: message repeated 7 times: [ pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed]
Nov 24 21:15:53 lnyg-srk systemd[1405]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 21:15:53 lnyg-srk systemd[1405]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 21:15:53 lnyg-srk systemd[1306]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 21:15:53 lnyg-srk systemd[1306]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 21:15:53 lnyg-srk systemd[1306]: pulseaudio.service: Scheduled restart job, restart counter is at 1.
Nov 24 21:15:53 lnyg-srk systemd[1461]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 21:15:53 lnyg-srk systemd[1461]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 21:15:53 lnyg-srk systemd[1306]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 21:15:53 lnyg-srk systemd[1306]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 21:15:53 lnyg-srk systemd[1306]: pulseaudio.service: Scheduled restart job, restart counter is at 2.
Nov 24 21:15:53 lnyg-srk systemd[1542]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 21:15:53 lnyg-srk systemd[1542]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 21:15:53 lnyg-srk systemd[1306]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 21:15:53 lnyg-srk systemd[1306]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 21:15:54 lnyg-srk systemd[1306]: pulseaudio.service: Scheduled restart job, restart counter is at 3.
Nov 24 21:15:54 lnyg-srk systemd[1547]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 21:15:54 lnyg-srk systemd[1547]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 21:15:54 lnyg-srk systemd[1306]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 21:15:54 lnyg-srk systemd[1306]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 21:15:54 lnyg-srk systemd[1306]: pulseaudio.service: Scheduled restart job, restart counter is at 4.
Nov 24 21:15:54 lnyg-srk systemd[1565]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 21:15:54 lnyg-srk systemd[1565]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 21:15:54 lnyg-srk systemd[1306]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 21:15:54 lnyg-srk systemd[1306]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 21:15:54 lnyg-srk systemd[1306]: pulseaudio.service: Scheduled restart job, restart counter is at 5.
Nov 24 21:15:54 lnyg-srk systemd[1306]: pulseaudio.service: Start request repeated too quickly.
Nov 24 21:15:54 lnyg-srk systemd[1306]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 21:15:54 lnyg-srk systemd[1306]: pulseaudio.socket: Failed with result 'service-start-limit-hit'.
Nov 24 21:15:58 lnyg-srk autojack[1406]:     cp = subprocess.run(["/usr/bin/pulseaudio", "-k"],
Nov 24 21:15:58 lnyg-srk autojack[1406]: PermissionError: [Errno 13] Permission denied: '/usr/bin/pulseaudio'
Nov 24 21:16:07 lnyg-srk dbus-daemon[814]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.81' (uid=1000 pid=2030 comm="/usr/bin/pulseaudio --daemonize=no --log-target=jo")
Nov 24 21:16:09 lnyg-srk indicator-sound[2628]: volume-control-pulse.vala:744: Unable to connect to dbus server at 'unix:path=/run/user/1000/pulse/dbus-socket': Verbindung ist gescheitert: Datei oder Verzeichnis nicht gefunden
Nov 24 21:16:12 lnyg-srk pulseaudio[2030]: After module unload, module 'module-null-sink' was still loaded!
Nov 24 21:16:12 lnyg-srk systemd[2024]: pulseaudio.service: Succeeded.
Nov 24 21:16:12 lnyg-srk pulseaudio[3144]: Failed to find a working profile.
Nov 24 21:16:12 lnyg-srk pulseaudio[3144]: Failed to load module "module-alsa-card" (argument: "device_id="2" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:16:12 lnyg-srk pulseaudio[3144]: Failed to find a working profile.
Nov 24 21:16:12 lnyg-srk pulseaudio[3144]: Failed to load module "module-alsa-card" (argument: "device_id="2" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:16:12 lnyg-srk pulseaudio[3144]: Failed to find a working profile.
Nov 24 21:16:12 lnyg-srk pulseaudio[3144]: Failed to load module "module-alsa-card" (argument: "device_id="2" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:16:12 lnyg-srk pulseaudio[3144]: Failed to find a working profile.
Nov 24 21:16:12 lnyg-srk pulseaudio[3144]: Failed to load module "module-alsa-card" (argument: "device_id="2" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:16:12 lnyg-srk pulseaudio[3144]: Failed to find a working profile.
Nov 24 21:16:12 lnyg-srk pulseaudio[3144]: Failed to load module "module-alsa-card" (argument: "device_id="2" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:16:12 lnyg-srk pulseaudio[3144]: Failed to find a working profile.
Nov 24 21:16:12 lnyg-srk pulseaudio[3144]: Failed to load module "module-alsa-card" (argument: "device_id="2" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:16:12 lnyg-srk pulseaudio[3144]: Tried to configure /devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card2 (alsa_card.pci-0000_05_00.6) more often than 5 times in 10s
Nov 24 21:16:12 lnyg-srk mate-settings-d[2537]: pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed
Nov 24 21:16:14 lnyg-srk indicator-sound[2628]: volume-control-pulse.vala:744: Unable to connect to dbus server at 'unix:path=/run/user/1000/pulse/dbus-socket': Verbindung ist gescheitert: Datei oder Verzeichnis nicht gefunden
Nov 24 21:16:17 lnyg-srk mate-settings-d[2537]: pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed
Nov 24 21:16:17 lnyg-srk mate-settings-d[2537]: message repeated 2 times: [ pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed]
Nov 24 21:32:07 lnyg-srk systemd[1428]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 21:32:07 lnyg-srk systemd[1428]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 21:32:07 lnyg-srk systemd[1414]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 21:32:07 lnyg-srk systemd[1414]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 21:32:07 lnyg-srk systemd[1414]: pulseaudio.service: Scheduled restart job, restart counter is at 1.
Nov 24 21:32:07 lnyg-srk systemd[1473]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 21:32:07 lnyg-srk systemd[1473]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 21:32:07 lnyg-srk systemd[1414]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 21:32:07 lnyg-srk systemd[1414]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 21:32:07 lnyg-srk systemd[1414]: pulseaudio.service: Scheduled restart job, restart counter is at 2.
Nov 24 21:32:07 lnyg-srk systemd[1565]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 21:32:07 lnyg-srk systemd[1565]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 21:32:07 lnyg-srk systemd[1414]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 21:32:07 lnyg-srk systemd[1414]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 21:32:08 lnyg-srk systemd[1414]: pulseaudio.service: Scheduled restart job, restart counter is at 3.
Nov 24 21:32:08 lnyg-srk systemd[1568]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 21:32:08 lnyg-srk systemd[1568]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 21:32:08 lnyg-srk systemd[1414]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 21:32:08 lnyg-srk systemd[1414]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 21:32:08 lnyg-srk systemd[1414]: pulseaudio.service: Scheduled restart job, restart counter is at 4.
Nov 24 21:32:08 lnyg-srk systemd[1608]: pulseaudio.service: Failed to execute command: Permission denied
Nov 24 21:32:08 lnyg-srk systemd[1608]: pulseaudio.service: Failed at step EXEC spawning /usr/bin/pulseaudio: Permission denied
Nov 24 21:32:08 lnyg-srk systemd[1414]: pulseaudio.service: Main process exited, code=exited, status=203/EXEC
Nov 24 21:32:08 lnyg-srk systemd[1414]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 21:32:08 lnyg-srk systemd[1414]: pulseaudio.service: Scheduled restart job, restart counter is at 5.
Nov 24 21:32:08 lnyg-srk systemd[1414]: pulseaudio.service: Start request repeated too quickly.
Nov 24 21:32:08 lnyg-srk systemd[1414]: pulseaudio.service: Failed with result 'exit-code'.
Nov 24 21:32:08 lnyg-srk systemd[1414]: pulseaudio.socket: Failed with result 'service-start-limit-hit'.
Nov 24 21:32:12 lnyg-srk autojack[1429]:     cp = subprocess.run(["/usr/bin/pulseaudio", "-k"],
Nov 24 21:32:12 lnyg-srk autojack[1429]: PermissionError: [Errno 13] Permission denied: '/usr/bin/pulseaudio'
Nov 24 21:32:17 lnyg-srk dbus-daemon[818]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.75' (uid=1000 pid=2046 comm="/usr/bin/pulseaudio --daemonize=no --log-target=jo")
Nov 24 21:32:17 lnyg-srk pulseaudio[2046]: Failed to find a working profile.
Nov 24 21:32:17 lnyg-srk pulseaudio[2046]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:32:17 lnyg-srk pulseaudio[2046]: Failed to find a working profile.
Nov 24 21:32:17 lnyg-srk pulseaudio[2046]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:32:17 lnyg-srk pulseaudio[2046]: Failed to find a working profile.
Nov 24 21:32:17 lnyg-srk pulseaudio[2046]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:32:17 lnyg-srk pulseaudio[2046]: Failed to find a working profile.
Nov 24 21:32:17 lnyg-srk pulseaudio[2046]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:32:17 lnyg-srk pulseaudio[2046]: Failed to find a working profile.
Nov 24 21:32:17 lnyg-srk pulseaudio[2046]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:32:17 lnyg-srk pulseaudio[2046]: Failed to find a working profile.
Nov 24 21:32:17 lnyg-srk pulseaudio[2046]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:32:17 lnyg-srk pulseaudio[2046]: Tried to configure /devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1 (alsa_card.pci-0000_05_00.6) more often than 5 times in 10s
Nov 24 21:32:19 lnyg-srk indicator-sound[2638]: volume-control-pulse.vala:744: Unable to connect to dbus server at 'unix:path=/run/user/1000/pulse/dbus-socket': Verbindung ist gescheitert: Datei oder Verzeichnis nicht gefunden
Nov 24 21:32:21 lnyg-srk pulseaudio[2046]: After module unload, module 'module-null-sink' was still loaded!
Nov 24 21:32:21 lnyg-srk systemd[2040]: pulseaudio.service: Succeeded.
Nov 24 21:32:22 lnyg-srk pulseaudio[3117]: Failed to find a working profile.
Nov 24 21:32:22 lnyg-srk pulseaudio[3117]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:32:22 lnyg-srk pulseaudio[3117]: Failed to find a working profile.
Nov 24 21:32:22 lnyg-srk pulseaudio[3117]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:32:22 lnyg-srk pulseaudio[3117]: Failed to find a working profile.
Nov 24 21:32:22 lnyg-srk pulseaudio[3117]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:32:22 lnyg-srk pulseaudio[3117]: Failed to find a working profile.
Nov 24 21:32:22 lnyg-srk pulseaudio[3117]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:32:22 lnyg-srk pulseaudio[3117]: Failed to find a working profile.
Nov 24 21:32:22 lnyg-srk pulseaudio[3117]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:32:22 lnyg-srk pulseaudio[3117]: Failed to find a working profile.
Nov 24 21:32:22 lnyg-srk pulseaudio[3117]: Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_05_00.6" card_name="alsa_card.pci-0000_05_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Nov 24 21:32:22 lnyg-srk pulseaudio[3117]: Tried to configure /devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1 (alsa_card.pci-0000_05_00.6) more often than 5 times in 10s
Nov 24 21:32:22 lnyg-srk mate-settings-d[2561]: pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed
Nov 24 21:32:24 lnyg-srk indicator-sound[2638]: volume-control-pulse.vala:744: Unable to connect to dbus server at 'unix:path=/run/user/1000/pulse/dbus-socket': Verbindung ist gescheitert: Datei oder Verzeichnis nicht gefunden
Nov 24 21:32:27 lnyg-srk mate-settings-d[2561]: pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed
Nov 24 21:32:27 lnyg-srk mate-settings-d[2561]: message repeated 2 times: [ pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed]
Nov 24 21:36:11 lnyg-srk mate-settings-d[2561]: pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed
Nov 24 21:36:11 lnyg-srk mate-settings-d[2561]: message repeated 2 times: [ pulse_port_switch_set_active_port_by_name: assertion 'PULSE_IS_PORT_SWITCH (swtch)' failed]

Lösung:

# blacklist acpi renoir driver
blacklist snd_pci_acp3x

# ...
# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }

# Make sure your card model  ("analog") is indexed as first one else it will be masked out by pulseaudio (known bug)
options snd-hda-intel index=0 model=alc256
options snd-hda-intel index=2 model=hdmi
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
# ...

Und die üblichen Ausgaben:

sudo dmesg|egrep -i "alsa|snd|hdmi|generic"
[    0.000000] Linux version 5.8.18-050818-generic (kernel@kathleen) (gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, GNU ld (GNU Binutils for Ubuntu) 2.35.1) #202011011237 SMP Sun Nov 1 12:40:15 UTC 2020
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.18-050818-generic root=UUID=ce1726d0-8292-4527-99e2-ea4a075e018f ro quiet splash iommu=pt vt.handoff=1
[    0.066354] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.18-050818-generic root=UUID=ce1726d0-8292-4527-99e2-ea4a075e018f ro quiet splash iommu=pt vt.handoff=1
[    0.386338] ... generic registers:      6
[    0.412014] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.676866] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.750494] PPP generic driver version 2.4.2
[    0.750996] ehci-platform: EHCI generic platform driver
[    0.751012] ohci-platform: OHCI generic platform driver
[    0.918503]     BOOT_IMAGE=/boot/vmlinuz-5.8.18-050818-generic
[    1.008732] usb usb1: Manufacturer: Linux 5.8.18-050818-generic xhci-hcd
[    1.010065] usb usb2: Manufacturer: Linux 5.8.18-050818-generic xhci-hcd
[    1.011663] usb usb3: Manufacturer: Linux 5.8.18-050818-generic xhci-hcd
[    1.013037] usb usb4: Manufacturer: Linux 5.8.18-050818-generic xhci-hcd
[    1.292073] checking generic (d0000000 7e9000) vs hw (d0000000 10000000)
[    1.342855] hid-generic 0018:04F3:307A.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1203:00 04F3:307A] on i2c-ELAN1203:00
[    1.486880] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.661491] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.856906] hid-generic 0003:1532:0050.0002: input,hidraw1: USB HID v1.11 Mouse [Razer Razer Naga Hex V2] on usb-0000:05:00.3-2/input0
[    1.925215] hid-generic 0003:1532:0050.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer Naga Hex V2] on usb-0000:05:00.3-2/input1
[    1.977844] hid-generic 0003:1A86:E040.0005: hiddev0,hidraw3: USB HID v1.00 Device [HID 1a86:e040] on usb-0000:05:00.3-3/input0
[    1.994506] hid-generic 0003:1532:0050.0004: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer Naga Hex V2] on usb-0000:05:00.3-2/input2
[    5.331616] snd_rn_pci_acp3x 0000:05:00.5: enabling device (0000 -> 0002)
[    5.428887] snd_hda_intel 0000:05:00.1: enabling device (0000 -> 0002)
[    5.428997] snd_hda_intel 0000:05:00.1: Handle vga_switcheroo audio client
[    5.429173] snd_hda_intel 0000:05:00.6: enabling device (0000 -> 0002)
[    5.512872] asus_wmi: ASUS WMI generic driver loaded
[    5.519083] snd_hda_intel 0000:05:00.1: bound 0000:05:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    5.522067] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card2/input18
[    5.534786] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    5.534792] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.534795] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    5.534796] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.534798] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.534800] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[    5.534803] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    5.569377] usbcore: registered new interface driver snd-usb-audio
[    5.626450] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card0/input23
[    5.936118] acp_pdm_mach acp_pdm_mach.0: snd_soc_register_card(acp) failed: -517
[    5.952857] acp_pdm_mach acp_pdm_mach.0: snd_soc_register_card(acp) failed: -517
[    5.952990] acp_pdm_mach acp_pdm_mach.0: snd_soc_register_card(acp) failed: -517
[    6.280127] Generic FE-GE Realtek PHY r8169-200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)

sowie

lspci -nnk | grep -A3 Audio
05:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:1637]
	Subsystem: ASUSTeK Computer Inc. Device [1043:16df]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
--
05:00.5 Multimedia controller [0480]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/FireFlight/Renoir Audio Processor [1022:15e2] (rev 01)
	Subsystem: Device [1e21:1043]
	Kernel driver in use: snd_rn_pci_acp3x
	Kernel modules: snd_pci_acp3x, snd_rn_pci_acp3x
05:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) HD Audio Controller [1022:15e3]
	DeviceName: HD Audio Controller
	Subsystem: ASUSTeK Computer Inc. Family 17h (Models 10h-1fh) HD Audio Controller [1043:1e21]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
06:00.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 81)

Außerdem

aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: Generic_1 [HD-Audio Generic], Gerät 0: ALC256 Analog [ALC256 Analog]
  Sub-Geräte: 0/1
  Sub-Gerät #0: subdevice #0
Karte 1: Controller [Wireless Controller], Gerät 0: USB Audio [USB Audio]
  Sub-Geräte: 0/1
  Sub-Gerät #0: subdevice #0
Karte 2: Generic [HD-Audio Generic], Gerät 3: HDMI 0 [HDMI 0]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0

Mit USB Soundkarte

pactl list short sinks
0	alsa_output.usb-Sony_Interactive_Entertainment_Wireless_Controller-00.analog-stereo	module-alsa-card.c	s16le 2ch 32000Hz	IDLE
1	alsa_output.pci-0000_05_00.1.HiFi__hw_Generic_1__sink	module-alsa-card.c	s16le 2ch 44100Hz	IDLE

pactl list short sources
0	alsa_output.usb-Sony_Interactive_Entertainment_Wireless_Controller-00.analog-stereo.monitor	module-alsa-card.c	s16le 2ch 32000Hz	RUNNING
1	alsa_input.usb-Sony_Interactive_Entertainment_Wireless_Controller-00.mono-fallback	module-alsa-card.c	s16le 1ch 16000Hz	RUNNING
2	alsa_input.pci-0000_05_00.5-platform-acp_pdm_mach.0.stereo-fallback	module-alsa-card.c	s32le 2ch 48000Hz	RUNNING
3	alsa_output.pci-0000_05_00.1.HiFi__hw_Generic_1__sink.monitor	module-alsa-card.c	s16le 2ch 44100Hz	RUNNING
4	alsa_input.pci-0000_05_00.1.HiFi__hw_Generic_1__source	module-alsa-card.c	s16le 2ch 44100Hz	RUNNING

Zugriffsrechte für gdm sollten gesperrt werden, wenn dieser versucht pulseaudio zu starten:

sudo setfacl -m u:gdm:r /usr/bin/pulseaudio

sudo getfacl /usr/bin/pulseaudio
# file: usr/bin/pulseaudio
# owner: root
# group: root
user::rwx
user:gdm:r--
...

Und hier sieht man den Bug in pulseaudio

4 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_05_00.1>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfc5c8000 irq 73"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:05:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card2"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "1637"
		device.string = "2"
		device.description = "HD-Audio Generic"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		HiFi: Play HiFi quality Music (priority 8000, available: unknown)
		off: Aus (priority 0, available: unknown)
	active profile: <HiFi>
	sinks:
		alsa_output.pci-0000_05_00.1.HiFi__hw_Generic_1__sink/#1: HD-Audio Generic Speaker + Headphones
	sources:
		alsa_output.pci-0000_05_00.1.HiFi__hw_Generic_1__sink.monitor/#3: Monitor of HD-Audio Generic Speaker + Headphones
		alsa_input.pci-0000_05_00.1.HiFi__hw_Generic_1__source/#4: HD-Audio Generic Headphones Stereo Microphone
	ports:
		[Out] Speaker: Speaker (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		[Out] Headphones: Headphones (priority 200, latency offset 0 usec, available: yes)
			properties:
				
		[In] Mic1: Digital Microphone (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		[In] Mic2: Headphones Stereo Microphone (priority 200, latency offset 0 usec, available: unknown)
			properties:
				
    index: 1
	name: <alsa_card.usb-Sony_Interactive_Entertainment_Wireless_Controller-00>
	driver: <module-alsa-card.c>
	owner module: 8
	properties:
		alsa.card = "1"
		alsa.card_name = "Wireless Controller"
		alsa.long_card_name = "Sony Interactive Entertainment Wireless Controller at usb-0000:05:00.4-2, full"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:05:00.4-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-2/3-2:1.0/sound/card1"
		udev.id = "usb-Sony_Interactive_Entertainment_Wireless_Controller-00"
		device.bus = "usb"
		device.vendor.id = "054c"
		device.vendor.name = "Sony Corp."
		device.product.id = "09cc"
		device.product.name = "DualShock 4 [CUH-ZCT2x]"
		device.serial = "Sony_Interactive_Entertainment_Wireless_Controller"
		device.string = "1"
		device.description = "DualShock 4 [CUH-ZCT2x]"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	profiles:
		input:mono-fallback: Mono-Eingabe (priority 1, available: unknown)
		input:multichannel-input: Mehrkanal-Eingabe (priority 1, available: unknown)
		output:analog-stereo: Analog Stereo-Ausgabe (priority 6500, available: unknown)
		output:analog-stereo+input:mono-fallback: Analog Stereo-Ausgabe + Mono-Eingabe (priority 6501, available: unknown)
		output:analog-stereo+input:multichannel-input: Analog Stereo-Ausgabe + Mehrkanal-Eingabe (priority 6501, available: unknown)
		output:iec958-stereo: Digital Stereo (IEC958)-Ausgabe (priority 5500, available: unknown)
		output:iec958-stereo+input:mono-fallback: Digital Stereo (IEC958)-Ausgabe + Mono-Eingabe (priority 5501, available: unknown)
		output:iec958-stereo+input:multichannel-input: Digital Stereo (IEC958)-Ausgabe + Mehrkanal-Eingabe (priority 5501, available: unknown)
		off: Aus (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:mono-fallback>
	sinks:
		alsa_output.usb-Sony_Interactive_Entertainment_Wireless_Controller-00.analog-stereo/#0: DualShock 4 [CUH-ZCT2x] Analog Stereo
	sources:
		alsa_output.usb-Sony_Interactive_Entertainment_Wireless_Controller-00.analog-stereo.monitor/#0: Monitor of DualShock 4 [CUH-ZCT2x] Analog Stereo
		alsa_input.usb-Sony_Interactive_Entertainment_Wireless_Controller-00.mono-fallback/#1: DualShock 4 [CUH-ZCT2x] Mono
	ports:
		analog-input-headset-mic: Mikrofon der Freisprecheinrichtung (priority 8800, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		multichannel-input: Mehrkanaleingang (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
		analog-output: Analoge Ausgabe (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
		iec958-stereo-output: Digitalausgang (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
    index: 2
	name: <alsa_card.pci-0000_05_00.5-platform-acp_pdm_mach.0>
	driver: <module-alsa-card.c>
	owner module: 9
	properties:
		alsa.card = "3"
		alsa.card_name = "acp"
		alsa.long_card_name = "ASUSTeKCOMPUTERINC.-TUFGamingFA506II_FA506II-1.0-FA506II"
		alsa.driver_name = "snd_acp3x_rn"
		device.bus_path = "pci-0000:05:00.5-platform-acp_pdm_mach.0"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.5/acp_pdm_mach.0/sound/card3"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "15e2"
		device.product.name = "Raven/Raven2/FireFlight/Renoir Audio Processor"
		device.string = "3"
		device.description = "Raven/Raven2/FireFlight/Renoir Audio Processor"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:stereo-fallback: Stereo-Eingabe (priority 51, available: unknown)
		input:multichannel-input: Mehrkanal-Eingabe (priority 1, available: unknown)
		off: Aus (priority 0, available: unknown)
	active profile: <input:stereo-fallback>
	sources:
		alsa_input.pci-0000_05_00.5-platform-acp_pdm_mach.0.stereo-fallback/#2: Raven/Raven2/FireFlight/Renoir Audio Processor Stereo
	ports:
		analog-input: Analogeingang (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				
		multichannel-input: Mehrkanaleingang (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
    index: 3
	name: <alsa_card.pci-0000_05_00.6>
	driver: <module-alsa-card.c>
	owner module: 31
	properties:
		alsa.card = "0"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfc5c0000 irq 74"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:05:00.6"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "15e3"
		device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
		device.string = "0"
		device.description = "Family 17h (Models 10h-1fh) HD Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		HiFi: Play HiFi quality Music (priority 8000, available: unknown)
		off: Aus (priority 0, available: unknown)
	active profile: <HiFi>
	sinks:
		alsa_output.pci-0000_05_00.6.HiFi__hw_Generic_1__sink/#2: Family 17h (Models 10h-1fh) HD Audio Controller Speaker + Headphones
	sources:
		alsa_output.pci-0000_05_00.6.HiFi__hw_Generic_1__sink.monitor/#5: Monitor of Family 17h (Models 10h-1fh) HD Audio Controller Speaker + Headphones
		alsa_input.pci-0000_05_00.6.HiFi__hw_acp__source/#6: Family 17h (Models 10h-1fh) HD Audio Controller Digital Microphone
		alsa_input.pci-0000_05_00.6.HiFi__hw_Generic_1__source/#7: Family 17h (Models 10h-1fh) HD Audio Controller Headphones Stereo Microphone
	ports:
		[Out] Speaker: Speaker (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		[Out] Headphones: Headphones (priority 200, latency offset 0 usec, available: yes)
			properties:
				
		[In] Mic1: Digital Microphone (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		[In] Mic2: Headphones Stereo Microphone (priority 200, latency offset 0 usec, available: unknown)
			properties:

@ realsuamor du warst ja richtig Fleißig 👍 😛

Was Pulseaudio betrifft,würde ich erst mal nur starten lassen wenn das System hochgefahren ist.Das wäre dann

sudo mv /usr/lib/systemd/user/pulseaudio.socket /usr/lib/systemd/user/pulseaudio.socket-bak
sudo mv /usr/lib/systemd/user/pulseaudio.service /usr/lib/systemd/user/pulseaudio.service-bak

Nach dem Anmelden dann nur

pulseaudio --start

Zum Testen wäre auch noch Interessant,ob der Ton vor dem start von Pulse Funktioniert,also nur über Alsa

speaker-test -c2 plughw:0,0

Gruß Stephan

Kellerkind_2009 schrieb:

@ realsuamor du warst ja richtig Fleißig 👍 😛

Was Pulseaudio betrifft,würde ich erst mal nur starten lassen wenn das System hochgefahren ist.Das wäre dann

sudo mv /usr/lib/systemd/user/pulseaudio.socket /usr/lib/systemd/user/pulseaudio.socket-bak
sudo mv /usr/lib/systemd/user/pulseaudio.service /usr/lib/systemd/user/pulseaudio.service-bak

Nach dem Anmelden dann nur

pulseaudio --start

Zum Testen wäre auch noch Interessant,ob der Ton vor dem start von Pulse Funktioniert,also nur über Alsa

speaker-test -c2 plughw:0,0

Gruß Stephan

Was heißt das zusammenfassend für meinen Problemfall? Soll ich die im vorgenannten Post genannten Maßnahmen vornehmen? Nicht, dass ich wieder von Dir Ärger bekomme, weil ich mich nicht an die Vorgaben halte.

19feet schrieb:

Nicht, dass ich wieder von Dir Ärger bekomme, weil ich mich nicht an die Vorgaben halte.

😛 nicht doch.Für dich mal bitte Ausführen

sudo mv /etc/modprobe.d/alsa-base.conf /etc/modprobe.d/alsa-base.conf-bak

echo -e "blacklist snd_hda_intel" | sudo tee -a /etc/modprobe.d/alsa-base.conf

Neustart

Dann bitte Ausführen und zeigen

sudo modprobe -v snd_hda_intel

sudo dmesg|egrep -i "alsa|snd|hdmi|generic"

aplay -l

lspci -nnk | grep -A3 Audio

Gruß Stephan

Kellerkind_2009 schrieb:

19feet schrieb:

Nicht, dass ich wieder von Dir Ärger bekomme, weil ich mich nicht an die Vorgaben halte.

😛 nicht doch.Für dich mal bitte Ausführen

sudo mv /etc/modprobe.d/alsa-base.conf /etc/modprobe.d/alsa-base.conf-bak

echo -e "blacklist snd_hda_intel" | sudo tee -a /etc/modprobe.d/alsa-base.conf

Neustart

Dann bitte Ausführen und zeigen

sudo modprobe -v snd_hda_intel

sudo dmesg|egrep -i "alsa|snd|hdmi|generic"

Ausgabe:

stephan@stephan-hp-envy-x360:~$ sudo dmesg|egrep -i "alsa|snd|hdmi|generic"
[sudo] Passwort für stephan: 
[    0.000000] Linux version 5.8.0-29-generic (buildd@lgw01-amd64-055) (gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, GNU ld (GNU Binutils for Ubuntu) 2.35.1) #31-Ubuntu SMP Fri Nov 6 12:37:59 UTC 2020 (Ubuntu 5.8.0-29.31-generic 5.8.14)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-29-generic root=UUID=2f0aea22-48ea-443e-8697-44f58acbb682 ro quiet splash snd_hda_intel.dmic_detect=0 vt.handoff=7
[    0.043223] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-29-generic root=UUID=2f0aea22-48ea-443e-8697-44f58acbb682 ro quiet splash snd_hda_intel.dmic_detect=0 vt.handoff=7
[    0.331332] ... generic registers:      6
[    0.355584] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.846610] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.236742] PPP generic driver version 2.4.2
[    1.236980] ehci-platform: EHCI generic platform driver
[    1.237009] ohci-platform: OHCI generic platform driver
[    1.363462]     BOOT_IMAGE=/boot/vmlinuz-5.8.0-29-generic
[    1.445446] usb usb1: Manufacturer: Linux 5.8.0-29-generic xhci-hcd
[    1.446471] usb usb2: Manufacturer: Linux 5.8.0-29-generic xhci-hcd
[    1.447059] usb usb3: Manufacturer: Linux 5.8.0-29-generic xhci-hcd
[    1.447359] usb usb4: Manufacturer: Linux 5.8.0-29-generic xhci-hcd
[    1.760177] hid-generic 0018:04F3:2B0E.0001: input,hidraw0: I2C HID v1.00 Device [ELAN2514:00 04F3:2B0E] on i2c-ELAN2514:00
[    1.760947] hid-generic 0018:06CB:CE17.0002: input,hidraw1: I2C HID v1.00 Mouse [SYNA32A1:00 06CB:CE17] on i2c-SYNA32A1:00
[    2.949425] snd_pci_acp3x 0000:04:00.5: enabling device (0000 -> 0002)
[    2.949578] snd_pci_acp3x 0000:04:00.5: Invalid ACP audio mode : 1
[    3.196034] acp_pdm_mach acp_pdm_mach.0: snd_soc_register_card(acp) failed: -517
[    3.196093] acp_pdm_mach acp_pdm_mach.0: snd_soc_register_card(acp) failed: -517
[    3.220646] snd_hda_intel 0000:04:00.1: dmic_detect option is deprecated, pass snd-intel-dspcfg.dsp_driver=1 option instead
[    3.220665] snd_hda_intel 0000:04:00.1: enabling device (0000 -> 0002)
[    3.220800] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[    3.220848] snd_hda_intel 0000:04:00.6: dmic_detect option is deprecated, pass snd-intel-dspcfg.dsp_driver=1 option instead
[    3.220857] snd_hda_intel 0000:04:00.6: enabling device (0000 -> 0002)
[    3.221154] checking generic (fce0000000 7e9000) vs hw (fce0000000 10000000)
[    3.949172] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card1/input25
[    3.959208] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC245: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    3.959211] snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.959213] snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.959214] snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
[    3.959215] snd_hda_codec_realtek hdaudioC2D0:    inputs:
[    3.959216] snd_hda_codec_realtek hdaudioC2D0:      Mic=0x19
[    4.045248] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card2/input26
[    4.045355] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card2/input27
[    4.166519] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    4.548022] Modules linked in: amd64_edac_mod(-) fjes(-) snd_hda_codec_realtek joydev snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_soc_dmic snd_acp3x_pdm_dma amdgpu snd_acp3x_rn snd_seq_midi edac_mce_amd rtw88_8822ce snd_soc_core snd_seq_midi_event rtw88_8822c snd_compress ac97_bus snd_pcm_dmaengine kvm_amd nls_iso8859_1 snd_rawmidi snd_pcm rtw88_pci iommu_v2 uvcvideo rtw88_core gpu_sched kvm crct10dif_pclmul ghash_clmulni_intel snd_seq ttm mac80211 aesni_intel snd_seq_device crypto_simd drm_kms_helper snd_timer btusb videobuf2_vmalloc cfg80211 videobuf2_memops btrtl videobuf2_v4l2 videobuf2_common btbcm input_leds cec btintel videodev rc_core bluetooth snd i2c_algo_bit hp_wmi cryptd serio_raw mc efi_pstore sparse_keymap fb_sys_fops glue_helper syscopyarea ecdh_generic snd_rn_pci_acp3x wmi_bmof sysfillrect hid_multitouch ecc k10temp sysimgblt snd_pci_acp3x libarc4 ccp rapl soundcore ucsi_acpi typec_ucsi typec
[    4.548057]  acpi_tad mac_hid sch_fq_codel parport_pc ppdev lp parport drm ip_tables x_tables autofs4 hid_generic rtsx_pci_sdmmc crc32_pclmul ahci nvme libahci i2c_piix4 nvme_core rtsx_pci xhci_pci xhci_pci_renesas wmi video i2c_hid hid
[    4.548071] CPU: 3 PID: 658 Comm: systemd-backlig Not tainted 5.8.0-29-generic #31-Ubuntu

aplay -l

Ausgabe:

stephan@stephan-hp-envy-x360:~$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 1: Generic [HD-Audio Generic], Gerät 3: HDMI 0 [HDMI 0]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 2: Generic_1 [HD-Audio Generic], Gerät 0: ALC245 Analog [ALC245 Analog]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0

lspci -nnk | grep -A3 Audio

Gruß Stephan

Ausgabe:

stephan@stephan-hp-envy-x360:~$ lspci -nnk | grep -A3 Audio
04:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:1637]
	Subsystem: Hewlett-Packard Company Device [103c:876f]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
--
04:00.5 Multimedia controller [0480]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/FireFlight/Renoir Audio Processor [1022:15e2] (rev 01)
	Subsystem: Hewlett-Packard Company Raven/Raven2/FireFlight/Renoir Audio Processor [103c:876f]
	Kernel driver in use: snd_rn_pci_acp3x
	Kernel modules: snd_pci_acp3x, snd_rn_pci_acp3x
04:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) HD Audio Controller [1022:15e3]
	Subsystem: Hewlett-Packard Company Family 17h (Models 10h-1fh) HD Audio Controller [103c:876f]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
04:00.7 Signal processing controller [1180]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/Renoir Sensor Fusion Hub [1022:15e4]

Sodann mit dem Befehl 'speaker-test -c2 plughw:0,0' kommt diesmal eine Sound-Ausgabe. Auch wenn ich im INternetbrowser etwas abspiele erhalte ich Sound. Unter den Klangeinstellungen sind nun als Ausgabegerät aufgeführt: 'Speaker - Family 27h (Models 10h-1fh)' und unter Eingabegerät 'Digital Microphone - Family 27h (Models 10h-1fh)'. Allerdings kommt unter den Klangeinstellungen → Ausgabe → Test keine Soundausgabe.

Heute kam ein Pulseaudio Update rein. Nach dem ChangeLog zu urteilen, könnte es Auswirkungen haben auf das Verhalten. Bin mal am Testen ohne meine Änderungen an der alsa-base.conf unter 5.8.x

Testergebnis: Eine Änderung der Reihenfolge der Soundkarten qist nicht mehr notwendig. pacmd zeigt die Karten korrekt an (keine Verdopplung). Natürlich mit deaktiviertem snd-acp3x (blacklist).

Weiter geht es – sind ja auf den richtigen Weg.Wieder die /etc/default/grub zurück auf Anfang

von
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash snd_hda_intel.dmic_detect=0"
in
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

ändern danach wieder

sudo update-grub

pulse ebenfalls wieder aktiv machen mit

sudo mv /usr/lib/systemd/user/pulseaudio.service-bak /usr/lib/systemd/user/pulseaudio.service
sudo mv /usr/lib/systemd/user/pulseaudio.socket-bak /usr/lib/systemd/user/pulseaudio.socket

Neustart.

Danach zeigen

modprobe -c | grep -i "1022.*15e2"
modprobe -c | grep -i "1022.*15e3"
modprobe -c | grep -i "1022.*15e4"

cat /etc/modprobe.d/alsa-base.conf
cat /etc/modprobe.d/blacklist.conf 

Kellerkind_2009 schrieb:

Weiter geht es – sind ja auf den richtigen Weg.Wieder die /etc/default/grub zurück auf Anfang

von
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash snd_hda_intel.dmic_detect=0"
in
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

ändern danach wieder

sudo update-grub

pulse ebenfalls wieder aktiv machen mit

sudo mv /usr/lib/systemd/user/pulseaudio.service-bak /usr/lib/systemd/user/pulseaudio.service
sudo mv /usr/lib/systemd/user/pulseaudio.socket-bak /usr/lib/systemd/user/pulseaudio.socket

Neustart.

Nach dem Neustart ist Soundausgabe wieder weg und Dummy-Ausgabe wieder da.

Danach zeigen

modprobe -c | grep -i "1022.*15e2"

Ausgabe:

stephan@stephan-hp-envy-x360:~$ modprobe -c | grep -i "1022.*15e2"
alias pci:v00001022d000015E2sv*sd*bc04sc80i00* snd_pci_acp3x
alias pci:v00001022d000015E2sv*sd*bc04sc80i00* snd_rn_pci_acp3x

modprobe -c | grep -i "1022.*15e3"

Ausgabe:

stephan@stephan-hp-envy-x360:~$ modprobe -c | grep -i "1022.*15e3"
alias pci:v00001022d000015E3sv*sd*bc*sc*i* snd_hda_intel

modprobe -c | grep -i "1022.*15e4"

hier kommt keine Ausgabe

cat /etc/modprobe.d/alsa-base.conf

Ausgabe:

stephan@stephan-hp-envy-x360:~$ cat /etc/modprobe.d/alsa-base.conf
blacklist snd_hda_intel

cat /etc/modprobe.d/blacklist.conf 

Ausgabe:

stephan@stephan-hp-envy-x360:~$ cat /etc/modprobe.d/blacklist.conf 
# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.

# evbug is a debug tool that should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394

# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m

# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2

# replaced by p54pci
blacklist prism54

# replaced by b43 and ssb.
blacklist bcm43xx

# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps

# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi

# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp

# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr

# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac

Soweit alles so wie ich es mir dachte.Nun führe aus

sudo modprobe -v snd_hda_intel

danach sollte der Ton Funktionieren.Zeige dann wieder die Ausgaben von

sudo dmesg|egrep -i "alsa|snd|hdmi|generic"

lspci -nnk | grep -A3 Audio

pactl info

pacmd info