Sorry das war mir so nicht bewusst, na dann versuch ich das mal.
uname -a
Linux iketop 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:41:14 UTC 2012 i686 i686 i386 GNU/Linux
lspci -nnk | grep -i net -A2
06:05.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
Subsystem: Intel Corporation Device [8086:2701]
Kernel driver in use: ipw2200
--
06:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Wistron Corp. Device [17c0:1053]
Kernel driver in use: 8139too
usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.02
S: Manufacturer=Linux 3.2.0-23-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.7
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.02
S: Manufacturer=Linux 3.2.0-23-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.02
S: Manufacturer=Linux 3.2.0-23-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.02
S: Manufacturer=Linux 3.2.0-23-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.02
S: Manufacturer=Linux 3.2.0-23-generic uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.3
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
egrep -v "^$|^#" /etc/network/interfaces
auto lo
iface lo inet loopback
egrep -v "^$|^#" /etc/resolv.conf
egrep: /etc/resolv.conf: No such file or directory
egrep -v "^$|^#" /etc/hosts
127.0.0.1 localhost
127.0.1.1 iketop
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
cat /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:07.0 (8139too)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0a:e4:b9:2f:4d", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x8086:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:05.0 (ipw2200)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:16:6f:a4:c7:96", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"ifconfig
eth0 Link encap:Ethernet HWaddr 00:0a:e4:b9:2f:4d
inet addr:192.168.0.103 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::20a:e4ff:feb9:2f4d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6179 errors:16 dropped:24 overruns:16 frame:0
TX packets:5817 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7223743 (7.2 MB) TX bytes:722642 (722.6 KB)
Interrupt:18 Base address:0x3000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:388 errors:0 dropped:0 overruns:0 frame:0
TX packets:388 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:31015 (31.0 KB) TX bytes:31015 (31.0 KB) route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0
iwconfig
lo no wireless extensions.
eth1 IEEE 802.11bg ESSID:off/any
Mode:Managed Channel:0 Access Point: Not-Associated
Bit Rate:0 kb/s Tx-Power=off Sensitivity=8/0
Retry limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
eth0 no wireless extensions.ping -c 4 <192.168.0.103>
bash: syntax error near unexpected token `newline'
ping -c 4 www.ubuntuusers.de
PING ubuntuusers.de (213.95.41.13) 56(84) bytes of data.
64 bytes from lisa.ubuntu-eu.org (213.95.41.13): icmp_req=1 ttl=57 time=15.6 ms
64 bytes from lisa.ubuntu-eu.org (213.95.41.13): icmp_req=2 ttl=57 time=17.8 ms
64 bytes from lisa.ubuntu-eu.org (213.95.41.13): icmp_req=3 ttl=57 time=14.5 ms
64 bytes from lisa.ubuntu-eu.org (213.95.41.13): icmp_req=4 ttl=57 time=15.5 ms
--- ubuntuusers.de ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3004ms
rtt min/avg/max/mdev = 14.584/15.919/17.860/1.205 ms
ping -c 4 213.95.41.11
PING 213.95.41.11 (213.95.41.11) 56(84) bytes of data.
64 bytes from 213.95.41.11: icmp_req=1 ttl=57 time=15.3 ms
64 bytes from 213.95.41.11: icmp_req=2 ttl=57 time=15.0 ms
64 bytes from 213.95.41.11: icmp_req=3 ttl=57 time=15.7 ms
64 bytes from 213.95.41.11: icmp_req=4 ttl=57 time=15.4 ms
--- 213.95.41.11 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3004ms
rtt min/avg/max/mdev = 15.088/15.406/15.703/0.241 ms
iwlist chan
lo no frequency information.
eth1 11 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Current Channel:0
eth0 no frequency information.sudo iwlist scan
[sudo] password for ike:
lo Interface doesn't support scanning.
eth1 No scan results
eth0 Interface doesn't support scanning.
rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
lsmod
Module Size Used by
snd_hda_codec_si3054 12864 1
snd_hda_codec_realtek 174055 1
joydev 17393 0
snd_hda_intel 32765 6
snd_hda_codec 109562 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13276 1 snd_hda_codec
snd_pcm 80845 5 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec
snd_seq_midi 13132 0
snd_rawmidi 25424 1 snd_seq_midi
rfcomm 38139 0
bnep 17830 2
parport_pc 32114 0
ppdev 12849 0
bluetooth 158438 10 rfcomm,bnep
binfmt_misc 17292 1
ipw2200 146176 0
snd_seq_midi_event 14475 1 snd_seq_midi
libipw 46701 1 ipw2200
cfg80211 178679 2 ipw2200,libipw
lib80211 14040 2 ipw2200,libipw
snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event
psmouse 87140 0
serio_raw 13027 0
i915 414568 3
snd_timer 28931 2 snd_pcm,snd_seq
snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq
drm_kms_helper 45466 1 i915
drm 197692 4 i915,drm_kms_helper
snd 62064 20 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
mac_hid 13077 0
i2c_algo_bit 13199 1 i915
soundcore 14635 1 snd
snd_page_alloc 14115 2 snd_hda_intel,snd_pcm
video 19068 1 i915
classmate_laptop 13924 0
lp 17455 0
parport 40930 3 parport_pc,ppdev,lp
8139too 23283 0
8139cp 22633 0
dmesg | egrep 'net|eth|sky|sis|via|3c3|3c5|e100|8139|8169|acx|air|ath|atl|ar9|carl|atme|at7|herm|iwl|ipw|rtl8|r81|rt2|rt3|rt6|rt7|tg3|ssb|wl|b43|b44|ori|pri|p5|zd|ndis|wmi|ns8|FW'
[ 0.000000] original variable MTRRs
[ 0.004413] CPU0: Thermal monitoring enabled (TM2)
[ 0.068003] print_constraints: dummy:
[ 0.081212] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.084388] pci 0000:06:07.0: [10ec:8139] type 0 class 0x000200
[ 0.089918] i2c-core: driver [aat2870] using legacy suspend method
[ 0.089920] i2c-core: driver [aat2870] using legacy resume method
[ 0.155852] audit: initializing netlink socket (disabled)
[ 0.257689] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.257694] ACPI: Thermal Zone [TZS0] (56 C)
[ 0.259825] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.259828] ACPI: Thermal Zone [TZS1] (43 C)
[ 0.606465] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.230491] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.230530] 8139cp 0000:06:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.231035] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.231078] 8139too 0000:06:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.261427] 8139too 0000:06:07.0: eth0: RealTek RTL8139 at 0x3000, 00:0a:e4:b9:2f:4d, IRQ 18
[ 16.601530] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.741486] Adding 511996k swap on /dev/sda5. Priority:-1 extents:1 across:511996k
[ 16.999926] intel_rng: FWH not detected
[ 17.066076] lib80211_crypt: registered algorithm 'NULL'
[ 17.161614] libipw: 802.11 data/management/control stack, git-1.1.13
[ 17.161620] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 17.292484] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 17.292488] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 17.292613] ipw2200 0000:06:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 17.292643] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 17.322479] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.921869] ipw2200: Radio Frequency Kill Switch is On:
[ 17.921873] Kill switch must be turned off for wireless networking to work.
[ 17.922856] cfg80211: failed to add phy80211 symlink to netdev!
[ 17.943024] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 18.320454] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.324603] 8139too 0000:06:07.0: eth0: link down
[ 18.324747] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.325192] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.576399] fbcon: inteldrmfb (fb0) is primary device
[ 21.112034] ipw2200: Failed to send POWER_MODE: Command timed out.
[ 38.888064] ipw2200: Failed to send POWER_MODE: Command timed out.
[ 149.216574] 8139too 0000:06:07.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 149.216649] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 160.536152] eth0: no IPv6 routers present
[ 3992.272036] eth0: no IPv6 routers present
cat /var/lib/NetworkManager/NetworkManager.state
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true
cat /etc/NetworkManager/NetworkManager.conf
[main]
plugins=ifupdown,keyfile
dns=dnsmasq
[ifupdown]
managed=false
Ich hoffe das hilft weiter.
Danke und Gruß
Ike76
