ubuntuusers.de

via DuckDuckGo

Grafiktreiber-support für resignierten Noob

Status: Ungelöst | Ubuntu-Version: Nicht spezifiziert
Antworten |

jalava

Anmeldungsdatum:
28. Dezember 2008

Beiträge: 59
Zitieren
15. März 2009 12:44

Hallo

Ich brauche Treiber für meine Grafikkarte. Ich habe schon stundenlang erfolglos versucht welche zu kriegen.. Dass ich so lange gebraucht habe lag daran, dass ich, wie es jetzt aussieht fälschlicherweise, davon ausgegangen bin, dass hier: http://www.samsung.de/produkte/detail_printerfriendly.aspx?guid=8d4e6c11-1bb1-44ee-bc41-11f1132b6eff steht welche Grafikkarte ich habe, da das genau mein Laptop ist. Habe also versucht die falschen zu installieren, mir dabei irgendwie mein GRUB zerschossen, aber obwohl ich immernoch eigentlich keine Ahnung habe was GRUB ist, hab ichs geschafft das wieder notdürftig zusammen zu flicken. Falls das eine Rolle spielt, erkläre ich unten nochmal ausführlich, was alles passiert ist.

Prinzipiell wäre ich unglaublich dankbar, wenn mir einer sagen könnte:

Welchen Grafikkartentreiber brauche ich? Wo finde ich ihn? und Wie installiere ich ihn?

Über Synaptic war ich bisher eigentlich immer erfolglos am suchen.

Im Terminal steht folgendes: 

lspci | grep VGA 
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)

Also einen Inteltreiber könnte man meinen.

Wiki dazu: http://wiki.ubuntuusers.de/Grafikkarten/Intel

Ergebnis: http://forum.ubuntuusers.de/topic/paket-915resolution-ist-nicht-verfuegbar/ (unten komm ich)

Referenzpakete installiert, sofern überhaupt die richtigen vorgefunden, und immernoch keine Veränderung. Mein Englisch ist leider eher begrenzt. Eigentlich reicht es, aber wenn dazu dann noch ne Menge Computerfachbegriffe kommen, die mir nichts sagen, verstehe ich schnell nur noch Bahnhof. Die Installation des auf der externen Homepage zum Download verlinkten 915resolution Paktes ist also schlicht zu hoch für mich. Vorallem bin ich mir nicht sicher, ob ich das überhaupt tun sollte.

Ich geb hier einfach mal ein paar Sachen von mir an, die helfen könnten:

Mein X-Server: 

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Device"
	Identifier	"Configured Video Device"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
EndSection

meine sourcedatei: http://paste.ubuntuusers.de/393684/ wobei die schon etwas älter ist und von der Zeit, als ich noch auf der Suche nach NVIDIA Treibern war. Wenn Ihr meint, ich solle sie besser neumachen mache ich das gerne.

Ein Übersicht, welche Module geladen sind: 

lsmod
Module                  Size  Used by
ipv6                  263972  10 
af_packet              25728  4 
binfmt_misc            16904  1 
rfcomm                 44432  0 
bridge                 56980  0 
stp                    10628  1 bridge
bnep                   20480  2 
sco                    18308  2 
l2cap                  30464  6 rfcomm,bnep
bluetooth              61924  6 rfcomm,bnep,sco,l2cap
ppdev                  15620  0 
acpi_cpufreq           15500  1 
cpufreq_stats          13188  0 
cpufreq_userspace      11396  0 
cpufreq_ondemand       14988  1 
cpufreq_powersave       9856  0 
freq_table             12672  3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative    14600  0 
container              11520  0 
sbs                    19464  0 
sbshc                  13440  1 sbs
pci_slot               12680  0 
wmi                    14504  0 
iptable_filter         10752  0 
ip_tables              19600  1 iptable_filter
x_tables               22916  1 ip_tables
nls_iso8859_1          12032  1 
nls_cp437              13696  1 
vfat                   18816  1 
fat                    57376  1 vfat
parport_pc             39204  0 
lp                     17156  0 
parport                42604  3 ppdev,parport_pc,lp
joydev                 18368  0 
arc4                    9984  2 
ecb                    10880  2 
crypto_blkcipher       25476  1 ecb
iwlagn                 99716  0 
iwlcore                94532  1 iwlagn
snd_hda_intel         384176  3 
rfkill                 17176  2 iwlcore
uvcvideo               63624  0 
serio_raw              13444  0 
snd_pcm_oss            46848  0 
compat_ioctl32          9344  1 uvcvideo
pcspkr                 10624  0 
snd_mixer_oss          22784  1 snd_pcm_oss
evdev                  17696  12 
psmouse                45200  0 
led_class              12164  1 iwlcore
videodev               41344  1 uvcvideo
snd_pcm                83204  2 snd_hda_intel,snd_pcm_oss
mac80211              216820  2 iwlagn,iwlcore
v4l1_compat            22404  2 uvcvideo,videodev
snd_seq_dummy          10884  0 
battery                18436  0 
cfg80211               32392  3 iwlagn,iwlcore,mac80211
snd_seq_oss            38528  0 
video                  25232  0 
output                 11008  1 video
snd_seq_midi           14336  0 
snd_rawmidi            29824  1 snd_seq_midi
snd_seq_midi_event     15232  2 snd_seq_oss,snd_seq_midi
snd_seq                57776  7 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              29960  2 snd_pcm,snd_seq
snd_seq_device         15116  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    63268  16 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              15328  1 snd
intel_agp              33724  1 
ac                     12292  0 
button                 14224  0 
snd_page_alloc         16136  2 snd_hda_intel,snd_pcm
agpgart                42184  2 intel_agp
shpchp                 38036  0 
pci_hotplug            34976  1 shpchp
ext3                  133256  1 
jbd                    55828  1 ext3
mbcache                16004  1 ext3
sd_mod                 42392  4 
crc_t10dif              9984  1 sd_mod
usbhid                 35840  0 
hid                    50560  1 usbhid
sr_mod                 22212  0 
cdrom                  43168  1 sr_mod
sg                     39732  0 
ahci                   37132  3 
libata                178208  1 ahci
scsi_mod              155212  4 sd_mod,sr_mod,sg,libata
dock                   16656  1 libata
uhci_hcd               30736  0 
sky2                   53380  0 
ehci_hcd               43788  0 
usbcore               149360  5 uvcvideo,usbhid,uhci_hcd,ehci_hcd
thermal                23708  0 
processor              42156  4 acpi_cpufreq,thermal
fan                    12548  0 
fbcon                  47648  0 
tileblit               10880  1 fbcon
font                   16512  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit
fuse                   60828  3

zur 3D-Beschleunigung: 

glxgears 
Xlib:  extension "GLX" missing on display ":0.0".
Error: couldn't get an RGB, Double-buffered visual

Ein Bildchen von meinem Synaptic: http://www.bilder-hochladen.net/files/6pvh-3-png.html

und noch ein Bild von Sysinfo, dass ich mir installiert habe: http://www.bilder-hochladen.net/files/6pvh-4-png.html

Ich gebe auch gerne noch mehr Infos.

Mir platzt mittlerweile der Schädel und ich bin für jede Hilfe sehr Dankbar!

jug Team-Icon

Ehemalige
Avatar von jug

Anmeldungsdatum:
19. März 2007

Beiträge: 12335

Wohnort: Berlin
Zitieren
15. März 2009 13:29

jalava schrieb:

Welchen Grafikkartentreiber brauche ich? Wo finde ich ihn? und Wie installiere ich ihn?

Schwerer Fehler den fast alle Neueinsteiger und vor allem Windows-Umsteiger unter Linux machen. Du brauchst keinen Treiber – fertig. Ja, schon, natürlich braucht man für eine Grafikkarte einen Treiber, aber Linux und natürlich auch Ubuntu liefert sooo viele Treiber schon von Haus aus mit, dass man nur bei sehr neuer oder wirklich exotischer Hardware noch extra Treiber installieren muss. Intel Grafikkarten gehören nicht dazu.

Dein Synaptic-Screenshot zeigt übrigens einen Hinweis auf das Paket xserver-xorg-video-intel – rate mal was sich darin befinden könnte, lies auch mal die Beschreibung des Paketes. Die Anleitung im Wiki ist für Ubuntu 6.06 (Dapper Drake), seitdem ist der Treiber wie gesagt direkt in das andere Paket verlegt worden und wird damit standardmäßig installiert.

Standardfrage: Warum glaubst du denn, dass du noch einen Treiber installieren musst? Gehen die richtigen Auflösungen nicht? Funktionieren die Desktopeffekte nicht (Achtung, kann auch an der alten Hardware liegen und nicht am Treiber)? Oder funktioniert sonst irgendwas komisch? Oder ist es einfach nur die Gewohnheit, von Windows: ich muss, ich muss, ich muss nach der Installation vom Betriebssystem noch irgendwas tun, damit die Hardware läuft? Gewöhn es dir ab 😉

Zeige uns bitte noch deine /var/log/Xorg.0.log daraus können wir am meisten ableiten, was bei dir funktioniert oder nicht funktioniert und warum.

~jug

jalava

(Themenstarter)

Anmeldungsdatum:
28. Dezember 2008

Beiträge: 59
Zitieren
15. März 2009 14:03 (zuletzt bearbeitet: 15. März 2009 14:04)

jug

Dein Synaptic-Screenshot zeigt übrigens einen Hinweis auf das Paket xserver-xorg-video-intel – rate mal was sich darin befinden könnte, lies auch mal die Beschreibung des Paketes. Die Anleitung im Wiki ist für Ubuntu 6.06 (Dapper Drake), seitdem ist der Treiber wie gesagt direkt in das andere Paket verlegt worden und wird damit standardmäßig installiert.

Standardfrage: Warum glaubst du denn, dass du noch einen Treiber installieren musst? Gehen die richtigen Auflösungen nicht? Funktionieren die Desktopeffekte nicht (Achtung, kann auch an der alten Hardware liegen und nicht am Treiber)? Oder funktioniert sonst irgendwas komisch? Oder ist es einfach nur die Gewohnheit, von Windows: ich muss, ich muss, ich muss nach der Installation vom Betriebssystem noch irgendwas tun, damit die Hardware läuft? Gewöhn es dir ab 😉

Zeige uns bitte noch deine /var/log/Xorg.0.log daraus können wir am meisten ableiten, was bei dir funktioniert oder nicht funktioniert und warum.

~jug

Das erste Mal, dass ich drauf gestoßen bin, dass mit den installierten Treibern was nicht stimmen könnte, war als ich plötzlich das Bedürfnis hatte GTA Vice CIty zu zocken und es nicht funktioniert hat. Das funktioniert bis heute nicht, aber ich bin eh nie ein großer Zocker gewesen. War nur ein kleiner Anfall. Ich habe aber auch mal so geguckt was es alles bei Spielen von Ubuntu gibt und bspw. Alien Arena startet nicht. Es passiert einfach gar nichts wenn ich drauf klicke. Aber wie gesagt, Spiele sind mir recht egal. Wenn ich doch mal Bock auf Zocken habe bin ich mit Wesnoth und Gnometris perfekt bedient ☺

Ich würde aber gerne mal die Bildschirmauflösung höher stellen. Die höchste von 3 Möglichkeiten ist 1024x768 (4:3) und wiederholrate nur 60HZ . Da mein Laptop noch recht nue ist, kann das unmöglich an der Hardware liegen. Vorallem störend ist allerdings, dass mir die Schrift sehr unscharf vorkommt, was lesen von längeren Texten jedesmal sehr anstrengend macht. Ich habe auch schon schon ein paar Mal hier bei irgendwelchen Problemen gestöbert und bin irgendwann immer drauf gestoßen, dass es was mit der Grafik zu tun haben KÖNNTE. Außerdem sollte die 3D-Beschleunigung ja funktionieren, wenn alles korrekt wäre. (Stell ich mir zumindest so vor 😉 )

meine Xorg.0.log:

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux fiffi 2.6.27-11-generic #1 SMP Thu Jan 29 19:24:39 UTC 2009 i686
Build Date: 24 October 2008  08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 15 11:47:24 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(**) |   |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 4.1
	X.Org XInput driver : 2.1
	X.Org Server Extension : 1.1
	X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@0:2:0) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6000000/0, 0xd0000000/0, I/O @ 0x00001800/0
(--) PCI: (0@0:2:1) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6400000/0
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  177.82  Tue Nov  4 14:03:48 PST 2008
(II) Loading extension GLX
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.5.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"

(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 2.4.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
	965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.1.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 4.1
(II) intel(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF6000000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 32704 kB
(II) intel(0): VESA VBE OEM: Intel(r)Cantiga Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)Cantiga Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): Output HDMI-1 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_B" initialized.
(II) intel(0): HDMI output 1 detected
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output HDMI-2 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_C" initialized.
(II) intel(0): HDMI output 2 detected
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output HDMI-1 disconnected
(II) intel(0): Output HDMI-2 connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using fuzzy aspect match for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Output HDMI-2 using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 32764 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"

(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 2.4.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000120 to 0x38000120
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000400 to 0x18000400
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000206 to 0x00000000
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEASTAT after: status:
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000206 to 0x00000206
(WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x200000d0 to 0x000c0010
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x11020a00 to 0x00000a00
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 739584 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 2958332 kB available
(EE) intel(0): [dri] I830CheckDRIAvailable failed: glx not loaded
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 22978560 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00094fff: compressed frame buffer (468 kB, 0x00000000be020000 physical
)
(II) intel(0): 0x00095000-0x0009efff: HW cursors (40 kB)
(II) intel(0): 0x0009f000-0x000a6fff: logical 3D context (32 kB)
(II) intel(0): 0x000a7000-0x000b8fff: exa G965 state buffer (72 kB)
(II) intel(0): 0x000b9000-0x000b9fff: power context (4 kB)
(II) intel(0): 0x00100000-0x0084dfff: front buffer (7480 kB) X tiled
(II) intel(0): 0x0084e000-0x01e37fff: exa offscreen (22440 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output HDMI-1 is connected to pipe none
(II) intel(0):   Output HDMI-2 is connected to pipe A
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Failed
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
(II) intel(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 2.0.99
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"

(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 0.15.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.15.2
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(**) Option "Device" "/dev/input/event10"
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "de"
(**) AT Translated Set 2 keyboard: xkb_layout: "de"
(II) config/hal: Adding input device HID 1241:1166
(**) HID 1241:1166: always reports core events
(**) HID 1241:1166: Device: "/dev/input/event2"
(II) HID 1241:1166: Found x and y relative axes
(II) HID 1241:1166: Found 5 mouse buttons
(II) HID 1241:1166: Configuring as mouse
(II) XINPUT: Adding extended input device "HID 1241:1166" (type: MOUSE)
(**) HID 1241:1166: YAxisMapping: buttons 4 and 5
(**) HID 1241:1166: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "de"
(**) Video Bus: xkb_layout: "de"
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.

jug Team-Icon

Ehemalige
Avatar von jug

Anmeldungsdatum:
19. März 2007

Beiträge: 12335

Wohnort: Berlin
Zitieren
15. März 2009 14:34

jalava schrieb:

Ich würde aber gerne mal die Bildschirmauflösung höher stellen. Die höchste von 3 Möglichkeiten ist 1024x768 (4:3) und wiederholrate nur 60HZ . Da mein Laptop noch recht nue ist, kann das unmöglich an der Hardware liegen.

60 Hz sind bei TFTs auch normal, der Treiber erkennt auch, dass der Bildschirm mehr kann.

Vorallem störend ist allerdings, dass mir die Schrift sehr unscharf vorkommt, was lesen von längeren Texten jedesmal sehr anstrengend macht.

Hast du Schriftbild verbessern schonmal ausprobiert?

Ok, kommen wir zu deiner Xorg.0.log im Detail:

(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  177.82  Tue Nov  4 14:03:48 PST 2008
(II) Loading extension GLX

Whoops, Nvidia? Ich würde sagen da sind noch Reste von deinem Versuch den Nvidia-Treiber zu installieren im System. Hast du den Treiber wieder komplett deinstalliert? Falls ja, versuch mal das Paket libgl1-mesa-glx neu zu installieren. Hintergrund: die proprietären Treiber von Nvidia und ATI bringen ihre eigene Version von GLX mit, die auf die Hardware und den Treiber optimiert ist. Intel schreibt den Treiber so, dass er mit der Standardimplementierung „mesa“ zusammenarbeitet – dummerweise natürlich nicht mit den gepatchten Versionen der proprietären Treiber. 

 
(EE) intel(0): [dri] I830CheckDRIAvailable failed: glx not loaded
[…]
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)

Kein Wunder 😉 

(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.

Sieht doch eigentlich nicht schlecht aus. Warum du diese Auflösung nicht aktivieren kannst könnte mit der falschen GLX-Lib zusammenhängen.

~jug

jalava

(Themenstarter)

Anmeldungsdatum:
28. Dezember 2008

Beiträge: 59
Zitieren
15. März 2009 14:58 (zuletzt bearbeitet: 15. März 2009 15:00)

hui hatte da wirklich noch Nvidia. Hab sie jetzt runtergeschmissen und Mesa-glx erneut installiert und computer neugestartet.

Der betreffende Teil meiner Xorg: 

(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX

Die Auflösung lässt sich leider immernoch nicht höher stellen.

ich setzt doch mal lieber die komplette Datei noch hier rein: 

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux fiffi 2.6.27-11-generic #1 SMP Thu Jan 29 19:24:39 UTC 2009 i686
Build Date: 24 October 2008  08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 15 14:49:23 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(**) |   |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 4.1
	X.Org XInput driver : 2.1
	X.Org Server Extension : 1.1
	X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@0:2:0) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6000000/0, 0xd0000000/0, I/O @ 0x00001800/0
(--) PCI: (0@0:2:1) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6400000/0
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.5.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"

(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 2.4.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
	965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.1.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 4.1
(II) intel(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF6000000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 32704 kB
(II) intel(0): VESA VBE OEM: Intel(r)Cantiga Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)Cantiga Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): Output HDMI-1 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_B" initialized.
(II) intel(0): HDMI output 1 detected
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output HDMI-2 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_C" initialized.
(II) intel(0): HDMI output 2 detected
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output HDMI-1 disconnected
(II) intel(0): Output HDMI-2 connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using fuzzy aspect match for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Output HDMI-2 using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 32764 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"

(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 2.4.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000120 to 0x38000120
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000400 to 0x18000400
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000206 to 0x00000000
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEASTAT after: status:
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000206 to 0x00000206
(WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x200000d0 to 0x000c0010
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x11020a00 to 0x00000a00
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 739584 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 2958332 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xf6000000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0xd0100000
(II) intel(0): [drm] mapped back buffer at 0xd2000000, handle = 0xd2000000
(II) intel(0): [drm] mapped depth buffer at 0xd274e000, handle = 0xd274e000
(II) intel(0): [drm] mapped classic textures at 0xd2e9c000, handle = 0xd2e9c000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 22978560 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01fff000 (pgoffset 8191)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0274e000 (pgoffset 10062)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02e9c000 (pgoffset 11932)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00094fff: compressed frame buffer (468 kB, 0x00000000be020000 physical
)
(II) intel(0): 0x00095000-0x0009efff: HW cursors (40 kB)
(II) intel(0): 0x0009f000-0x000a6fff: logical 3D context (32 kB)
(II) intel(0): 0x000a7000-0x000b8fff: exa G965 state buffer (72 kB)
(II) intel(0): 0x000b9000-0x000b9fff: power context (4 kB)
(II) intel(0): 0x00100000-0x0084dfff: front buffer (7480 kB) X tiled
(II) intel(0): 0x0084e000-0x01e37fff: exa offscreen (22440 kB)
(II) intel(0): 0x01fff000:            end of stolen memory
(II) intel(0): 0x01fff000-0x01ffffff: HW status (4 kB)
(II) intel(0): 0x02000000-0x0274dfff: back buffer (7480 kB) X tiled
(II) intel(0): 0x0274e000-0x02e9bfff: depth buffer (7480 kB) Y tiled
(II) intel(0): 0x02e9c000-0x04e9bfff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output HDMI-1 is connected to pipe none
(II) intel(0):   Output HDMI-2 is connected to pipe A
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 2.0.99
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"

(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 0.15.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.15.2
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(**) Option "Device" "/dev/input/event10"
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "de"
(**) AT Translated Set 2 keyboard: xkb_layout: "de"
(II) config/hal: Adding input device HID 1241:1166
(**) HID 1241:1166: always reports core events
(**) HID 1241:1166: Device: "/dev/input/event2"
(II) HID 1241:1166: Found x and y relative axes
(II) HID 1241:1166: Found 5 mouse buttons
(II) HID 1241:1166: Configuring as mouse
(II) XINPUT: Adding extended input device "HID 1241:1166" (type: MOUSE)
(**) HID 1241:1166: YAxisMapping: buttons 4 and 5
(**) HID 1241:1166: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "de"
(**) Video Bus: xkb_layout: "de"
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.94  1280 1296 1344 1408  800 801 804 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12869
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" removed.

jalava

(Themenstarter)

Anmeldungsdatum:
28. Dezember 2008

Beiträge: 59
Zitieren
15. März 2009 15:56

jippiiiiiiiiiiiiiiiiiie es geht vorran 😀

ich hab gemerkt das die Taskleisten irgendwie plötzlich etwas plastischer aussehen. Hab dann mal aus Test AlienArena gestartet und siehe da: Es funktioniert. Habe dann GTA testen wollen und dabei ist er leider bei einem schwarzem Bildschirm hängen geblieben aber das ist mir recht egal ☺ bin dann über strg-alt-f1 in terminal und hab neugestartet. Nach dem Neustart ging dann plötzlich das hin und her wechseln von einem Display zum andern mit dem Scrollrad wieder (ging vorher nicht), wenn ich ein Fenster auf den andern Bildschirm ziehen will rutscht es irgendwann automatisch (vorher konnte ich das nur noch per rechtsklick auf Programm und dann auf arbeitsfläche rechts verschieben. Mit der Maus rüberziehen ging nicht mehr) Die Schrift ist wunderbar lesbar jetzt! Wenn ich 3d Teste kommt zwar immernoch 

glxgears 
XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
      after 6414 requests (6335 known processed) with 0 events remaining.

aber immerhin öffnet sich ein kleines Fenster mit bunten Zahnrädern, was vorher nicht passiert ist.

Nur die Auflösung raufstellen funktioniert leider noch nicht. Aber ich bin ein sehr anspruchsloser Mensch ☺ Trotzdem nehme ich Tipps natürlich gerne noch entgegen.

Falls das relevant sein könnte: Irgendwann gab es 180er Nvidia Treiber, also neuere als vorher. Hab diese installiert und mir dabei mein GRUB zerschossen. Laptop ist nicht mehr hochgefahren. Hab dann auf externer Festplatte Ubuntu installiert, von da gebootet und ganz viel Sachen ins Terminal eingegeben und sonstwie gemacht. (nur von dieser Seite) Irgendwann konnte ich dann plötzlich mit angeschlossener externen Festplatte auch von der internen starten und irgendwann ging es dann auch ohne externe. Ich lande allerdings vorher immer im Terminal und es kommt nach ganz vielen [ok]ein [fail] und die Meldung

*File system check failed.
A log is being saved in /var/log/fsck/checkfs if that location is writable.
Please repair the file system manually.

Da drunter kann ich dann irgendwie exit eingeben, dann rattert der noch was runter und ich komme ganz normal ins Ubuntu

Damit werd ich mich bei Zeiten mal näher beschäftigen. Bin vorher mit funktionierender Grafikkarte erstmal voll zufrieden. Nur falls das eben dafür wichtig ist, wollt ichs dann doch mal hier posten

1000 Dank an jug schonmal!
Antworten |