Seit gestern lässt sich ein mehrjährig funktionierendes System, Desktoprechner, nicht mehr starten.
Die Meldungen lauten in etwa (abgetippt):
ata3: COMJRESET failed (errno=-16)
ata4.00: exception Emask 0x40 SAct 0x0 SErr 0
ata4.00: irq_stat 0x4000001
ata4: SError: HostInt 10B8B
ata4.00: cmd a0/01:00:00:00:01/00:00:00:00:00
res 51/54:03:00:00:01/00:00:00:00:00
ata4.00: status: { DRDY ERR}
ata4.00: revalidation failed (errno=-5)
\\
ata4.00: exception Emask 0x52 AAct 0x0 SErr 0
ata4.00: irq_stat 0x8000000, interface fatal
ata4: SError: { UnrecovData Proto HostInt 10B
ata4.00: cmd a0/00:00:00:08:00/00:00:00:00:00
res 50/00:03:00:08:00/00:00:00:00:00
ata4.00: status: { DRDY }
ata4.00: revalidation failed (errno=-5)
kernel: end_request: I/0 error, dev sr0, sector 176
kernel: Buffer I/0 error on device sr0, logical block
\\
\\
systemd-udevd[232]: timeout 'udisks-part-id /dev/sr0'
systemd[1]: Timed out waiting for device dev-disk-by\
systemd[1]: Dependency failed for Local File System.
systemd[1]: Dependency failed for Remote File Systems.
[drm:radeon_pci_probe] *ERROR* radeon kernel
systemd[488]: Failed at step EXEC spawning /bin/plymo
Sieht das nach Hardware-Defekt aus?
Auf dem Rechner sind eine SSD sowie eine HDD verbaut:
kubuntu@kubuntu:~$ sudo parted -l
Model: ATA INTEL SSDSC2MH12 (scsi)
Disk /dev/sda: 120GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 39,1GB 39,1GB primary ext4
2 39,1GB 57,0GB 17,9GB primary ext4
3 57,0GB 97,0GB 40,0GB primary ext4 boot
4 97,0GB 120GB 23,0GB primary ext4
Model: ATA WDC WD2002FYPS-0 (scsi)
Disk /dev/sdb: 2000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 16,8GB 16,8GB primary linux-swap(v1) boot
2 16,8GB 2000GB 1984GB extended
5 16,8GB 2000GB 1984GB logical ext4
kubuntu@kubuntu:~$
SMART-Kurz-Tests lauten:
kubuntu@kubuntu:~$ sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Intel 510 Series SSDs
Device Model: INTEL SSDSC2MH120A2
Serial Number: LNEL120400DB120CGN
LU WWN Device Id: 0 1507a5 1e26b5c96
Firmware Version: PPG4
User Capacity: 120.034.123.776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 2d
SATA Version is: SATA 3.0, 6.0 Gb/s
Local Time is: Wed May 22 19:18:26 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 10) seconds.
Offline data collection
capabilities: (0x15) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0020 100 100 000 Old_age Offline - 0
4 Start_Stop_Count 0x0030 100 100 000 Old_age Offline - 0
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 5962
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2644
192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 143
225 Host_Writes_32MiB 0x0030 100 100 000 Old_age Offline - 96833
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0032 096 096 000 Old_age Always - 0
SMART Error Log not supported
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
kubuntu@kubuntu:~$und
kubuntu@kubuntu:~$ sudo smartctl -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE4-GP
Device Model: WDC WD2002FYPS-02W3B0
Serial Number: WD-WCAVY6800496
LU WWN Device Id: 5 0014ee 2b051b3b8
Firmware Version: 04.01G01
User Capacity: 2.000.398.934.016 bytes [2,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed May 22 19:17:08 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 249) Self-test routine in progress...
90% of test remaining.
Total time to complete Offline
data collection: (42000) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 425) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 235 234 021 Pre-fail Always - 10208
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2520
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 056 056 000 Old_age Always - 32213
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2519
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 198
193 Load_Cycle_Count 0x0032 182 182 000 Old_age Always - 54715
194 Temperature_Celsius 0x0022 118 106 000 Old_age Always - 34
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 90% 32212 -
# 2 Extended offline Aborted by host 90% 6 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
kubuntu@kubuntu:~$
Blöd ist nun auch, dass ich von einem Kubuntu-Live-System nicht auf meine HDD zugreifen kann, auf der sich dringend benötigte Daten befinden. Obwohl die Platte gemountet ist, komme ich über Dolphin nicht an sie heran ("Ordner /media/kubuntu/767af545-b3b6-4d61-aaf7-14db93eb6272 lässt sich nicht öffnen.")
Gruß Marind
