Seit gestern lässt sich ein mehrjährig funktionierendes System, Desktoprechner, nicht mehr starten.
Die Meldungen lauten in etwa (abgetippt):
ata3: COMJRESET failed (errno=-16) ata4.00: exception Emask 0x40 SAct 0x0 SErr 0 ata4.00: irq_stat 0x4000001 ata4: SError: HostInt 10B8B ata4.00: cmd a0/01:00:00:00:01/00:00:00:00:00 res 51/54:03:00:00:01/00:00:00:00:00 ata4.00: status: { DRDY ERR} ata4.00: revalidation failed (errno=-5) \\ ata4.00: exception Emask 0x52 AAct 0x0 SErr 0 ata4.00: irq_stat 0x8000000, interface fatal ata4: SError: { UnrecovData Proto HostInt 10B ata4.00: cmd a0/00:00:00:08:00/00:00:00:00:00 res 50/00:03:00:08:00/00:00:00:00:00 ata4.00: status: { DRDY } ata4.00: revalidation failed (errno=-5) kernel: end_request: I/0 error, dev sr0, sector 176 kernel: Buffer I/0 error on device sr0, logical block \\ \\ systemd-udevd[232]: timeout 'udisks-part-id /dev/sr0' systemd[1]: Timed out waiting for device dev-disk-by\ systemd[1]: Dependency failed for Local File System. systemd[1]: Dependency failed for Remote File Systems. [drm:radeon_pci_probe] *ERROR* radeon kernel systemd[488]: Failed at step EXEC spawning /bin/plymo
Sieht das nach Hardware-Defekt aus?
Auf dem Rechner sind eine SSD sowie eine HDD verbaut:
kubuntu@kubuntu:~$ sudo parted -l Model: ATA INTEL SSDSC2MH12 (scsi) Disk /dev/sda: 120GB Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags: Number Start End Size Type File system Flags 1 1049kB 39,1GB 39,1GB primary ext4 2 39,1GB 57,0GB 17,9GB primary ext4 3 57,0GB 97,0GB 40,0GB primary ext4 boot 4 97,0GB 120GB 23,0GB primary ext4 Model: ATA WDC WD2002FYPS-0 (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags: Number Start End Size Type File system Flags 1 1049kB 16,8GB 16,8GB primary linux-swap(v1) boot 2 16,8GB 2000GB 1984GB extended 5 16,8GB 2000GB 1984GB logical ext4 kubuntu@kubuntu:~$
SMART-Kurz-Tests lauten:
kubuntu@kubuntu:~$ sudo smartctl -a /dev/sda smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel 510 Series SSDs Device Model: INTEL SSDSC2MH120A2 Serial Number: LNEL120400DB120CGN LU WWN Device Id: 0 1507a5 1e26b5c96 Firmware Version: PPG4 User Capacity: 120.034.123.776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 2d SATA Version is: SATA 3.0, 6.0 Gb/s Local Time is: Wed May 22 19:18:26 2019 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 10) seconds. Offline data collection capabilities: (0x15) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0020 100 100 000 Old_age Offline - 0 4 Start_Stop_Count 0x0030 100 100 000 Old_age Offline - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 5962 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2644 192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 143 225 Host_Writes_32MiB 0x0030 100 100 000 Old_age Offline - 96833 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 096 096 000 Old_age Always - 0 SMART Error Log not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported kubuntu@kubuntu:~$
und
kubuntu@kubuntu:~$ sudo smartctl -a /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE4-GP Device Model: WDC WD2002FYPS-02W3B0 Serial Number: WD-WCAVY6800496 LU WWN Device Id: 5 0014ee 2b051b3b8 Firmware Version: 04.01G01 User Capacity: 2.000.398.934.016 bytes [2,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed May 22 19:17:08 2019 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: (42000) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 425) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 235 234 021 Pre-fail Always - 10208 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2520 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 056 056 000 Old_age Always - 32213 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2519 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 198 193 Load_Cycle_Count 0x0032 182 182 000 Old_age Always - 54715 194 Temperature_Celsius 0x0022 118 106 000 Old_age Always - 34 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 90% 32212 - # 2 Extended offline Aborted by host 90% 6 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. kubuntu@kubuntu:~$
Blöd ist nun auch, dass ich von einem Kubuntu-Live-System nicht auf meine HDD zugreifen kann, auf der sich dringend benötigte Daten befinden. Obwohl die Platte gemountet ist, komme ich über Dolphin nicht an sie heran ("Ordner /media/kubuntu/767af545-b3b6-4d61-aaf7-14db93eb6272 lässt sich nicht öffnen.")
Gruß Marind