|
Anmeldungsdatum: Beiträge: 62 |
Man ist nie zu Alt zum Lernen 79j Kommunikation mit scanner nicht möglich obwohl scanner gefunden wird und eingeschaltet ist. Den Fehler 'xsane' hatten wir schon einmal. > > > sudo adduser $USER lp ? Xsane 0.999 Bearbeitet von schwarzheit: Versionsangabe korrigiert. Bearbeitet von schwarzheit: Versionsangabe nochmals korrigiert. |
|
Supporter
Anmeldungsdatum: Beiträge: 9135 |
Und deine Frage / dein Problem ist jetzt genau was? Bitte richtig fragen lesen und beachten. |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 62 |
"Kommunikation mit scanner nicht möglich Sicherstellen dass der scanner (USB) eingeschaltet ist und mit computer verbunden ist" |
|
Supporter, Wikiteam
Anmeldungsdatum: Beiträge: 10841 |
|
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 62 |
Nein, Danke , Sind für mich Böhmische Dörfer <pre><font color="#4E9A06"><b>dick@dick-750XGK</b></font>:<font color="#3667A6"><b>~</b></font>$ export SANE_DEBUG_DLL=255 && scanimage -L [17:39:10.929669] [sanei_debug] Setting debug level of dll to 255. [17:39:10.929801] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.2.1-debian [17:39:10.929821] [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [17:39:10.930086] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [17:39:10.930134] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [17:39:10.930774] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [17:39:10.930850] [dll] sane_init/read_config: reading dll.d/hplip [17:39:10.930877] [dll] add_backend: adding backend `hpaio' [17:39:10.930898] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/airscan [17:39:10.930923] [dll] sane_init/read_config: reading dll.d/airscan [17:39:10.930969] [dll] add_backend: adding backend `airscan' [17:39:10.930984] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/epsonscan2 [17:39:10.931001] [dll] sane_init/read_config: reading dll.d/epsonscan2 [17:39:10.931013] [dll] add_backend: adding backend `epsonscan2' [17:39:10.931044] [dll] sane_init/read_dlld: done. [17:39:10.931076] [dll] sane_init/read_config: reading dll.conf [17:39:10.931099] [dll] add_backend: adding backend `net' [17:39:10.931111] [dll] add_backend: adding backend `abaton' [17:39:10.931120] [dll] add_backend: adding backend `agfafocus' [17:39:10.931130] [dll] add_backend: adding backend `apple' [17:39:10.931138] [dll] add_backend: adding backend `artec' [17:39:10.931146] [dll] add_backend: adding backend `artec_eplus48u' [17:39:10.931158] [dll] add_backend: adding backend `as6e' [17:39:10.931166] [dll] add_backend: adding backend `avision' [17:39:10.931174] [dll] add_backend: adding backend `bh' [17:39:10.931183] [dll] add_backend: adding backend `canon' [17:39:10.931191] [dll] add_backend: adding backend `canon630u' [17:39:10.931199] [dll] add_backend: adding backend `canon_dr' [17:39:10.931207] [dll] add_backend: adding backend `canon_lide70' [17:39:10.931216] [dll] add_backend: adding backend `cardscan' [17:39:10.931231] [dll] add_backend: adding backend `coolscan' [17:39:10.931240] [dll] add_backend: adding backend `coolscan3' [17:39:10.931249] [dll] add_backend: adding backend `dell1600n_net' [17:39:10.931270] [dll] add_backend: adding backend `dmc' [17:39:10.931296] [dll] add_backend: adding backend `epjitsu' [17:39:10.931305] [dll] add_backend: adding backend `epson2' [17:39:10.931313] [dll] add_backend: adding backend `epsonds' [17:39:10.931325] [dll] add_backend: adding backend `escl' [17:39:10.931347] [dll] add_backend: adding backend `fujitsu' [17:39:10.931361] [dll] add_backend: adding backend `genesys' [17:39:10.931374] [dll] add_backend: adding backend `gt68xx' [17:39:10.931383] [dll] add_backend: adding backend `hp' [17:39:10.931391] [dll] add_backend: adding backend `hp3500' [17:39:10.931412] [dll] add_backend: adding backend `hp3900' [17:39:10.931429] [dll] add_backend: adding backend `hp4200' [17:39:10.931441] [dll] add_backend: adding backend `hp5400' [17:39:10.931452] [dll] add_backend: adding backend `hp5590' [17:39:10.931461] [dll] add_backend: adding backend `hpljm1005' [17:39:10.931472] [dll] add_backend: adding backend `hpsj5s' [17:39:10.931483] [dll] add_backend: adding backend `hs2p' [17:39:10.931493] [dll] add_backend: adding backend `ibm' [17:39:10.931504] [dll] add_backend: adding backend `kodak' [17:39:10.931514] [dll] add_backend: adding backend `kodakaio' [17:39:10.931525] [dll] add_backend: adding backend `kvs1025' [17:39:10.931537] [dll] add_backend: adding backend `kvs20xx' [17:39:10.931548] [dll] add_backend: adding backend `kvs40xx' [17:39:10.931558] [dll] add_backend: adding backend `leo' [17:39:10.931569] [dll] add_backend: adding backend `lexmark' [17:39:10.931580] [dll] add_backend: adding backend `ma1509' [17:39:10.931592] [dll] add_backend: adding backend `magicolor' [17:39:10.931603] [dll] add_backend: adding backend `matsushita' [17:39:10.931615] [dll] add_backend: adding backend `microtek' [17:39:10.931627] [dll] add_backend: adding backend `microtek2' [17:39:10.931638] [dll] add_backend: adding backend `mustek' [17:39:10.931650] [dll] add_backend: adding backend `mustek_usb' [17:39:10.931662] [dll] add_backend: adding backend `mustek_usb2' [17:39:10.931673] [dll] add_backend: adding backend `nec' [17:39:10.931689] [dll] add_backend: adding backend `niash' [17:39:10.931702] [dll] add_backend: adding backend `pie' [17:39:10.931714] [dll] add_backend: adding backend `pieusb' [17:39:10.931726] [dll] add_backend: adding backend `pint' [17:39:10.931737] [dll] add_backend: adding backend `pixma' [17:39:10.931749] [dll] add_backend: adding backend `plustek' [17:39:10.931761] [dll] add_backend: adding backend `qcam' [17:39:10.931772] [dll] add_backend: adding backend `ricoh' [17:39:10.931783] [dll] add_backend: adding backend `ricoh2' [17:39:10.931795] [dll] add_backend: adding backend `rts8891' [17:39:10.931807] [dll] add_backend: adding backend `s9036' [17:39:10.931819] [dll] add_backend: adding backend `sceptre' [17:39:10.931831] [dll] add_backend: adding backend `sharp' [17:39:10.931843] [dll] add_backend: adding backend `sm3600' [17:39:10.931854] [dll] add_backend: adding backend `sm3840' [17:39:10.931866] [dll] add_backend: adding backend `snapscan' [17:39:10.931878] [dll] add_backend: adding backend `sp15c' [17:39:10.931890] [dll] add_backend: adding backend `tamarack' [17:39:10.931901] [dll] add_backend: adding backend `teco1' [17:39:10.931917] [dll] add_backend: adding backend `teco2' [17:39:10.931929] [dll] add_backend: adding backend `teco3' [17:39:10.931941] [dll] add_backend: adding backend `u12' [17:39:10.931952] [dll] add_backend: adding backend `umax' [17:39:10.931969] [dll] add_backend: adding backend `umax1220u' [17:39:10.931982] [dll] add_backend: adding backend `v4l' [17:39:10.931994] [dll] add_backend: adding backend `xerox_mfp' [17:39:10.932039] [dll] sane_get_devices [17:39:10.932054] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:10.932070] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [17:39:10.932089] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [17:39:10.932397] [dll] init: initializing backend `xerox_mfp' [17:39:10.943568] [dll] init: backend `xerox_mfp' is version 1.0.13 [17:39:10.943724] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:10.943738] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [17:39:10.943751] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [17:39:10.944208] [dll] init: initializing backend `v4l' [17:39:11.052532] [dll] init: backend `v4l' is version 1.0.5 [17:39:11.052594] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.052608] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [17:39:11.052627] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [17:39:11.052939] [dll] init: initializing backend `umax1220u' [17:39:11.062415] [dll] init: backend `umax1220u' is version 1.0.2 [17:39:11.062443] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.062452] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [17:39:11.062466] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [17:39:11.062680] [dll] init: initializing backend `umax' [17:39:11.068996] [dll] init: backend `umax' is version 1.0.45 [17:39:11.069015] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.069022] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [17:39:11.069032] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [17:39:11.069222] [dll] init: initializing backend `u12' [17:39:11.074920] [dll] init: backend `u12' is version 1.0.0 [17:39:11.074935] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.074941] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [17:39:11.074951] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [17:39:11.075130] [dll] init: initializing backend `teco3' [17:39:11.075282] [dll] init: backend `teco3' is version 1.0.1 [17:39:11.075295] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.075302] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [17:39:11.075322] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [17:39:11.075457] [dll] init: initializing backend `teco2' [17:39:11.075565] [dll] init: backend `teco2' is version 1.0.10 [17:39:11.075592] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.075597] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [17:39:11.075605] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [17:39:11.075691] [dll] init: initializing backend `teco1' [17:39:11.075825] [dll] init: backend `teco1' is version 1.0.10 [17:39:11.075832] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.075838] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [17:39:11.075846] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [17:39:11.075973] [dll] init: initializing backend `tamarack' [17:39:11.076023] [dll] init: backend `tamarack' is version 1.0.0 [17:39:11.076029] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.076040] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [17:39:11.076050] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [17:39:11.076170] [dll] init: initializing backend `sp15c' [17:39:11.076200] [dll] init: backend `sp15c' is version 1.0.0 [17:39:11.076207] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.076213] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [17:39:11.076222] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [17:39:11.076354] [dll] init: initializing backend `snapscan' [17:39:11.082265] [dll] init: backend `snapscan' is version 1.4.53 [17:39:11.082289] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.082295] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [17:39:11.082305] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [17:39:11.082467] [dll] init: initializing backend `sm3840' [17:39:11.088062] [dll] init: backend `sm3840' is version 1.0.0 [17:39:11.088077] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.088084] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [17:39:11.088093] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [17:39:11.088222] [dll] init: initializing backend `sm3600' [17:39:11.093775] [dll] init: backend `sm3600' is version 1.0.6 [17:39:11.093790] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.093797] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [17:39:11.093823] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [17:39:11.093999] [dll] init: initializing backend `sharp' [17:39:11.094075] [dll] init: backend `sharp' is version 1.0.0 [17:39:11.094085] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.094090] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [17:39:11.094098] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [17:39:11.094178] [dll] init: initializing backend `sceptre' [17:39:11.094225] [dll] init: backend `sceptre' is version 1.0.10 [17:39:11.094233] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.094239] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [17:39:11.094249] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [17:39:11.094340] [dll] init: initializing backend `s9036' [17:39:11.094378] [dll] init: backend `s9036' is version 1.0.0 [17:39:11.094386] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.094394] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [17:39:11.094404] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [17:39:11.094572] [dll] init: initializing backend `rts8891' [17:39:11.100383] [dll] init: backend `rts8891' is version 1.0.2401 [17:39:11.100457] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.100464] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1' [17:39:11.100473] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1' [17:39:11.100623] [dll] init: initializing backend `ricoh2' [17:39:11.106109] [dll] init: backend `ricoh2' is version 1.0.0 [17:39:11.106122] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.106129] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [17:39:11.106138] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [17:39:11.106302] [dll] init: initializing backend `ricoh' [17:39:11.106363] [dll] init: backend `ricoh' is version 1.0.0 [17:39:11.106371] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.106377] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [17:39:11.106386] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [17:39:11.106480] [dll] init: initializing backend `qcam' [17:39:11.106513] [dll] init: backend `qcam' is version 1.0.0 [17:39:11.106518] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.106524] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [17:39:11.106535] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [17:39:11.106675] [dll] init: initializing backend `plustek' [17:39:11.111960] [dll] init: backend `plustek' is version 1.0.0 [17:39:11.111978] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.111983] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [17:39:11.111991] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [17:39:11.112193] [dll] init: initializing backend `pixma' [17:39:11.116930] [dll] init: backend `pixma' is version 1.0.28 [17:39:11.638576] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.638670] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' [17:39:11.638713] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory) [17:39:11.638729] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1' [17:39:11.638746] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory) [17:39:11.638761] [dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1' [17:39:11.638778] [dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory) [17:39:11.638796] [dll] load: couldn't find backend `pint' (No such file or directory) [17:39:11.638812] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.638837] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1' [17:39:11.638877] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1' [17:39:11.639563] [dll] init: initializing backend `pieusb' [17:39:11.650413] [dll] init: backend `pieusb' is version 1.0.1 [17:39:11.650450] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.650459] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [17:39:11.650483] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [17:39:11.650687] [dll] init: initializing backend `pie' [17:39:11.650779] [dll] init: backend `pie' is version 1.0.9 [17:39:11.650788] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.650798] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [17:39:11.650809] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [17:39:11.650970] [dll] init: initializing backend `niash' [17:39:11.657630] [dll] init: backend `niash' is version 1.0.1 [17:39:11.657651] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.657659] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [17:39:11.657671] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [17:39:11.657868] [dll] init: initializing backend `nec' [17:39:11.657986] [dll] init: backend `nec' is version 1.0.0 [17:39:11.657994] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.657999] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [17:39:11.658010] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [17:39:11.658189] [dll] init: initializing backend `mustek_usb2' [17:39:11.658205] [dll] init: backend `mustek_usb2' is version 1.0.10 [17:39:11.663938] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.663954] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [17:39:11.663968] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [17:39:11.664111] [dll] init: initializing backend `mustek_usb' [17:39:11.670209] [dll] init: backend `mustek_usb' is version 1.0.18 [17:39:11.670224] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.670230] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [17:39:11.670238] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [17:39:11.670465] [dll] init: initializing backend `mustek' [17:39:11.670637] [dll] init: backend `mustek' is version 1.0.138 [17:39:11.670646] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.670651] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [17:39:11.670659] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [17:39:11.670762] [dll] init: initializing backend `microtek2' [17:39:11.670826] [dll] init: backend `microtek2' is version 1.0.0 [17:39:11.670836] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.670842] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [17:39:11.670851] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [17:39:11.670927] [dll] init: initializing backend `microtek' [17:39:11.670968] [dll] init: backend `microtek' is version 1.0.0 [17:39:11.670974] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.670980] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [17:39:11.670989] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [17:39:11.671064] [dll] init: initializing backend `matsushita' [17:39:11.671139] [dll] init: backend `matsushita' is version 1.0.7 [17:39:11.671146] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:11.671152] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [17:39:11.671160] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [17:39:11.672706] [dll] init: initializing backend `magicolor' [17:39:11.678779] [dll] init: backend `magicolor' is version 1.0.1 [17:39:13.196338] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:13.196409] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [17:39:13.196443] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [17:39:13.197075] [dll] init: initializing backend `ma1509' [17:39:13.205421] [dll] init: backend `ma1509' is version 1.0.3 [17:39:13.205454] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:13.205463] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [17:39:13.205477] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [17:39:13.205767] [dll] init: initializing backend `lexmark' [17:39:13.212938] [dll] init: backend `lexmark' is version 1.0.32 [17:39:13.213002] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:13.213009] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [17:39:13.213018] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [17:39:13.213200] [dll] init: initializing backend `leo' [17:39:13.213290] [dll] init: backend `leo' is version 1.0.11 [17:39:13.213306] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:13.213311] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1' [17:39:13.213322] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1' [17:39:13.213473] [dll] init: initializing backend `kvs40xx' [17:39:13.219638] [dll] init: backend `kvs40xx' is version 1.0.1 [17:39:13.219671] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:13.219677] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [17:39:13.219687] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [17:39:13.219848] [dll] init: initializing backend `kvs20xx' [17:39:13.225437] [dll] init: backend `kvs20xx' is version 1.0.2 [17:39:13.225477] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:13.225485] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [17:39:13.225512] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [17:39:13.225698] [dll] init: initializing backend `kvs1025' [17:39:13.231656] [dll] init: backend `kvs1025' is version 1.0.5 [17:39:13.231673] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:13.231681] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [17:39:13.231692] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [17:39:13.232481] [dll] init: initializing backend `kodakaio' [17:39:13.238380] [dll] init: backend `kodakaio' is version 1.0.3 [17:39:15.170497] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.170599] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [17:39:15.170667] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [17:39:15.171232] [dll] init: initializing backend `kodak' [17:39:15.171300] [dll] init: backend `kodak' is version 1.0.7 [17:39:15.171483] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.171517] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [17:39:15.171563] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [17:39:15.171865] [dll] init: initializing backend `ibm' [17:39:15.172011] [dll] init: backend `ibm' is version 1.0.0 [17:39:15.172038] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.172057] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [17:39:15.172083] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [17:39:15.172670] [dll] init: initializing backend `hs2p' [17:39:15.172906] [dll] init: backend `hs2p' is version 1.0.0 [17:39:15.172935] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.172954] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [17:39:15.172982] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [17:39:15.173304] [dll] init: initializing backend `hpsj5s' [17:39:15.173437] [dll] init: backend `hpsj5s' is version 1.0.3 [17:39:15.173460] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.173477] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [17:39:15.173502] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [17:39:15.173786] [dll] init: initializing backend `hpljm1005' [17:39:15.182878] [dll] init: backend `hpljm1005' is version 1.0.1 [17:39:15.182928] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.182939] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [17:39:15.182959] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [17:39:15.183292] [dll] init: initializing backend `hp5590' [17:39:15.189999] [dll] init: backend `hp5590' is version 1.0.8 [17:39:15.190021] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.190029] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [17:39:15.190040] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [17:39:15.190219] [dll] init: initializing backend `hp5400' [17:39:15.195985] [dll] init: backend `hp5400' is version 1.0.3 [17:39:15.195999] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.196005] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [17:39:15.196015] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [17:39:15.196170] [dll] init: initializing backend `hp4200' [17:39:15.202024] [dll] init: backend `hp4200' is version 1.0.0 [17:39:15.202040] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.202047] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [17:39:15.202057] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [17:39:15.204156] [dll] init: initializing backend `hp3900' [17:39:15.210088] [dll] init: backend `hp3900' is version 1.0.0 [17:39:15.210105] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.210112] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [17:39:15.210122] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [17:39:15.210311] [dll] init: initializing backend `hp3500' [17:39:15.216677] [dll] init: backend `hp3500' is version 1.0.0 [17:39:15.216696] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.216704] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [17:39:15.216716] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [17:39:15.216954] [dll] init: initializing backend `hp' [17:39:15.216991] [dll] init: backend `hp' is version 1.0.8 [17:39:15.222968] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.222986] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [17:39:15.222997] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [17:39:15.223172] [dll] init: initializing backend `gt68xx' [17:39:15.229007] [dll] init: backend `gt68xx' is version 1.0.84 [17:39:15.229099] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.229106] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [17:39:15.229116] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [17:39:15.229579] [dll] init: initializing backend `genesys' [17:39:15.236037] [dll] init: backend `genesys' is version 1.0.0 [17:39:15.236129] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.236135] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [17:39:15.236144] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [17:39:15.236337] [dll] init: initializing backend `fujitsu' [17:39:15.236356] [dll] init: backend `fujitsu' is version 1.0.140 [17:39:15.241618] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:15.241630] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1' [17:39:15.241642] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1' [17:39:15.252461] [dll] init: initializing backend `escl' [17:39:15.252495] [dll] init: backend `escl' is version 1.0.0 [17:39:16.319790] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:16.319835] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [17:39:16.319861] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [17:39:16.320385] [dll] init: initializing backend `epsonds' [17:39:16.327600] [dll] init: backend `epsonds' is version 1.0.0 [17:39:17.343365] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:17.343590] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [17:39:17.343630] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [17:39:17.344157] [dll] init: initializing backend `epson2' [17:39:17.352145] [dll] init: backend `epson2' is version 1.0.124 [17:39:18.353537] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.353597] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [17:39:18.353627] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [17:39:18.354182] [dll] init: initializing backend `epjitsu' [17:39:18.354211] [dll] init: backend `epjitsu' is version 1.0.33 [17:39:18.361327] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.361345] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [17:39:18.361355] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [17:39:18.361596] [dll] init: initializing backend `dmc' [17:39:18.361652] [dll] init: backend `dmc' is version 1.0.0 [17:39:18.361659] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.361663] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [17:39:18.361670] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [17:39:18.361868] [dll] init: initializing backend `dell1600n_net' [17:39:18.361876] [dll] init: backend `dell1600n_net' is version 1.0.0 [17:39:18.668106] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.668214] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [17:39:18.668338] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [17:39:18.669186] [dll] init: initializing backend `coolscan3' [17:39:18.680463] [dll] init: backend `coolscan3' is version 1.0.0 [17:39:18.680559] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.680571] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [17:39:18.680584] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [17:39:18.680910] [dll] init: initializing backend `coolscan' [17:39:18.680989] [dll] init: backend `coolscan' is version 1.0.0 [17:39:18.681000] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.681009] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [17:39:18.681021] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [17:39:18.681181] [dll] init: initializing backend `cardscan' [17:39:18.690151] [dll] init: backend `cardscan' is version 1.0.3 [17:39:18.690263] [dll] load: searching backend `canon_lide70' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.690293] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1' [17:39:18.690311] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1' [17:39:18.690647] [dll] init: initializing backend `canon_lide70' [17:39:18.699472] [dll] init: backend `canon_lide70' is version 1.0.0 [17:39:18.699516] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.699530] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [17:39:18.699548] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [17:39:18.699955] [dll] init: initializing backend `canon_dr' [17:39:18.699989] [dll] init: backend `canon_dr' is version 1.0.65 [17:39:18.708036] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.708058] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [17:39:18.708069] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [17:39:18.708332] [dll] init: initializing backend `canon630u' [17:39:18.715467] [dll] init: backend `canon630u' is version 1.0.1 [17:39:18.715488] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.715497] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [17:39:18.715512] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [17:39:18.715742] [dll] init: initializing backend `canon' [17:39:18.715816] [dll] init: backend `canon' is version 1.0.0 [17:39:18.715828] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.715838] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [17:39:18.715854] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [17:39:18.715968] [dll] init: initializing backend `bh' [17:39:18.716036] [dll] init: backend `bh' is version 1.0.4 [17:39:18.716047] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.716057] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [17:39:18.716071] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [17:39:18.716297] [dll] init: initializing backend `avision' [17:39:18.723155] [dll] init: backend `avision' is version 1.0.297 [17:39:18.723472] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.723481] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [17:39:18.723490] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [17:39:18.723631] [dll] init: initializing backend `as6e' [17:39:18.729027] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.729054] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [17:39:18.729075] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [17:39:18.729340] [dll] init: initializing backend `artec_eplus48u' [17:39:18.735702] [dll] init: backend `artec_eplus48u' is version 1.0.0 [17:39:18.735717] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.735724] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [17:39:18.735734] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [17:39:18.735902] [dll] init: initializing backend `artec' [17:39:18.735967] [dll] init: backend `artec' is version 1.0.0 [17:39:18.735976] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.735982] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [17:39:18.735993] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [17:39:18.736086] [dll] init: initializing backend `apple' [17:39:18.736128] [dll] init: backend `apple' is version 1.0.0 [17:39:18.736135] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.736141] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [17:39:18.736151] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [17:39:18.736246] [dll] init: initializing backend `agfafocus' [17:39:18.736302] [dll] init: backend `agfafocus' is version 1.0.0 [17:39:18.736311] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.736317] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [17:39:18.736325] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [17:39:18.736420] [dll] init: initializing backend `abaton' [17:39:18.736465] [dll] init: backend `abaton' is version 1.0.0 [17:39:18.736472] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.736478] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [17:39:18.736486] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [17:39:18.736603] [dll] init: initializing backend `net' [17:39:18.739404] [dll] init: backend `net' is version 1.2.1 [17:39:18.739432] [dll] load: searching backend `epsonscan2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:18.739438] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonscan2.so.1' [17:39:18.739456] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonscan2.so.1' [17:39:18.740417] [dll] init: initializing backend `epsonscan2' [17:39:18.740443] [dll] init: backend `epsonscan2' is version 1.1.0 [17:39:19.021369] [dll] load: searching backend `airscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:19.021397] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-airscan.so.1' [17:39:19.021405] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-airscan.so.1' [17:39:19.021780] [dll] init: initializing backend `airscan' [17:39:19.026491] [dll] init: backend `airscan' is version 1.0.0 [17:39:20.037632] [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [17:39:20.037688] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [17:39:20.037757] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [17:39:20.039752] [dll] init: initializing backend `hpaio' [17:39:20.041648] [dll] init: backend `hpaio' is version 1.0.0 [17:39:20.078629] [dll] sane_get_devices: found 2 devices device `v4l:/dev/video0' is a Noname 720p HD Camera: 720p HD Camera virtual device device `epsonscan2:EPSON Perfection V33/V330:003:003:esci2:usb:ES00AD:322' is a EPSON EPSON Perfection V33/V330:003:003 flatbed scanner [17:39:20.078709] [dll] sane_exit: exiting [17:39:20.078726] [dll] sane_exit: calling backend `xerox_mfp's exit function [17:39:20.079055] [dll] sane_exit: calling backend `v4l's exit function [17:39:20.079423] [dll] sane_exit: calling backend `umax1220u's exit function [17:39:20.079607] [dll] sane_exit: calling backend `umax's exit function [17:39:20.079736] [dll] sane_exit: calling backend `u12's exit function [17:39:20.079853] [dll] sane_exit: calling backend `teco3's exit function [17:39:20.079986] [dll] sane_exit: calling backend `teco2's exit function [17:39:20.080079] [dll] sane_exit: calling backend `teco1's exit function [17:39:20.080168] [dll] sane_exit: calling backend `tamarack's exit function [17:39:20.080269] [dll] sane_exit: calling backend `sp15c's exit function [17:39:20.080394] [dll] sane_exit: calling backend `snapscan's exit function [17:39:20.080502] [dll] sane_exit: calling backend `sm3840's exit function [17:39:20.080599] [dll] sane_exit: calling backend `sm3600's exit function [17:39:20.080700] [dll] sane_exit: calling backend `sharp's exit function [17:39:20.080795] [dll] sane_exit: calling backend `sceptre's exit function [17:39:20.080879] [dll] sane_exit: calling backend `s9036's exit function [17:39:20.080962] [dll] sane_exit: calling backend `rts8891's exit function [17:39:20.081073] [dll] sane_exit: calling backend `ricoh2's exit function [17:39:20.081251] [dll] sane_exit: calling backend `ricoh's exit function [17:39:20.081357] [dll] sane_exit: calling backend `qcam's exit function [17:39:20.081475] [dll] sane_exit: calling backend `plustek's exit function [17:39:20.081586] [dll] sane_exit: calling backend `pixma's exit function [17:39:20.081792] [dll] sane_exit: calling backend `pieusb's exit function [17:39:20.081924] [dll] sane_exit: calling backend `pie's exit function [17:39:20.082001] [dll] sane_exit: calling backend `niash's exit function [17:39:20.082079] [dll] sane_exit: calling backend `nec's exit function [17:39:20.082152] [dll] sane_exit: calling backend `mustek_usb2's exit function [17:39:20.082230] [dll] sane_exit: calling backend `mustek_usb's exit function [17:39:20.082327] [dll] sane_exit: calling backend `mustek's exit function [17:39:20.082416] [dll] sane_exit: calling backend `microtek2's exit function [17:39:20.082506] [dll] sane_exit: calling backend `microtek's exit function [17:39:20.082589] [dll] sane_exit: calling backend `matsushita's exit function [17:39:20.082659] [dll] sane_exit: calling backend `magicolor's exit function [17:39:20.082754] [dll] sane_exit: calling backend `ma1509's exit function [17:39:20.082838] [dll] sane_exit: calling backend `lexmark's exit function [17:39:20.082988] [dll] sane_exit: calling backend `leo's exit function [17:39:20.083062] [dll] sane_exit: calling backend `kvs40xx's exit function [17:39:20.083174] [dll] sane_exit: calling backend `kvs20xx's exit function [17:39:20.083246] [dll] sane_exit: calling backend `kvs1025's exit function [17:39:20.083365] [dll] sane_exit: calling backend `kodakaio's exit function [17:39:20.083451] [dll] sane_exit: calling backend `kodak's exit function [17:39:20.083540] [dll] sane_exit: calling backend `ibm's exit function [17:39:20.083602] [dll] sane_exit: calling backend `hs2p's exit function [17:39:20.083724] [dll] sane_exit: calling backend `hpsj5s's exit function [17:39:20.083830] [dll] sane_exit: calling backend `hpljm1005's exit function [17:39:20.083918] [dll] sane_exit: calling backend `hp5590's exit function [17:39:20.084003] [dll] sane_exit: calling backend `hp5400's exit function [17:39:20.084079] [dll] sane_exit: calling backend `hp4200's exit function [17:39:20.084195] [dll] sane_exit: calling backend `hp3900's exit function [17:39:20.084339] [dll] sane_exit: calling backend `hp3500's exit function [17:39:20.084443] [dll] sane_exit: calling backend `hp's exit function [17:39:20.084571] [dll] sane_exit: calling backend `gt68xx's exit function [17:39:20.084718] [dll] sane_exit: calling backend `genesys's exit function [17:39:20.085179] [dll] sane_exit: calling backend `fujitsu's exit function [17:39:20.085303] [dll] sane_exit: calling backend `escl's exit function [17:39:20.087058] [dll] sane_exit: calling backend `epsonds's exit function [17:39:20.087181] [dll] sane_exit: calling backend `epson2's exit function [17:39:20.087311] [dll] sane_exit: calling backend `epjitsu's exit function [17:39:20.087401] [dll] sane_exit: calling backend `dmc's exit function [17:39:20.087483] [dll] sane_exit: calling backend `dell1600n_net's exit function [17:39:20.087537] [dll] sane_exit: calling backend `coolscan3's exit function [17:39:20.087611] [dll] sane_exit: calling backend `coolscan's exit function [17:39:20.087679] [dll] sane_exit: calling backend `cardscan's exit function [17:39:20.087755] [dll] sane_exit: calling backend `canon_lide70's exit function [17:39:20.087819] [dll] sane_exit: calling backend `canon_dr's exit function [17:39:20.087894] [dll] sane_exit: calling backend `canon630u's exit function [17:39:20.087962] [dll] sane_exit: calling backend `canon's exit function [17:39:20.088029] [dll] sane_exit: calling backend `bh's exit function [17:39:20.088087] [dll] sane_exit: calling backend `avision's exit function [17:39:20.088193] [dll] sane_exit: calling backend `artec_eplus48u's exit function [17:39:20.088259] [dll] sane_exit: calling backend `artec's exit function [17:39:20.088347] [dll] sane_exit: calling backend `apple's exit function [17:39:20.088408] [dll] sane_exit: calling backend `agfafocus's exit function [17:39:20.088469] [dll] sane_exit: calling backend `abaton's exit function [17:39:20.088538] [dll] sane_exit: calling backend `net's exit function [17:39:20.089458] [dll] sane_exit: calling backend `epsonscan2's exit function [17:39:20.089503] [dll] sane_exit: calling backend `airscan's exit function [17:39:20.091886] [dll] sane_exit: calling backend `hpaio's exit function [17:39:20.092643] [dll] sane_exit: finished <font color="#4E9A06"><b>dick@dick-750XGK</b></font>:<font color="#3667A6"><b>~</b></font>$ sudo dpkg -l *sane* | grep ii [sudo: authenticate] Passwort: <font color="#CC1A12"><b>ii</b></font> libsane-common 1.4.0-1ubuntu1 all API library for scanners -- documentation and support files <font color="#CC1A12"><b>ii</b></font> libsane-hpaio:amd64 3.24.4+dfsg0-0ubuntu8.1 amd64 HP SANE backend for multi-function peripherals <font color="#CC1A12"><b>ii</b></font> libsane1:amd64 1.4.0-1ubuntu1 amd64 API library for scanners <font color="#CC1A12"><b>ii</b></font> sane-airscan 0.99.36-2ubuntu1 amd64 SANE backend for AirScan (eSCL) and WSD document scanner <font color="#CC1A12"><b>ii</b></font> sane-utils 1.4.0-1ubuntu1 amd64 API library for scanners -- utilities <font color="#CC1A12"><b>ii</b></font> xsane 0.999-13 amd64 featureful graphical frontend for SANE (Scanner Access Now Easy) <font color="#CC1A12"><b>ii</b></font> xsane-common 0.999-13 all xsane architecture independent files <font color="#4E9A06"><b>dick@dick-750XGK</b></font>:<font color="#3667A6"><b>~</b></font>$ sudo dpkg -l | egrep 'iscan*|esci-*|epson' ii <font color="#CC1A12"><b>epson</b></font>scan2 6.6.40.0-1 amd64 This is scanner driver. <font color="#4E9A06"><b>dick@dick-750XGK</b></font>:<font color="#3667A6"><b>~</b></font>$ systemctl --no-pager status sane* <font color="#4E9A06"><b>dick@dick-750XGK</b></font>:<font color="#3667A6"><b>~</b></font>$ uname -rm 7.0.0-38-generic x86_64 <font color="#4E9A06"><b>dick@dick-750XGK</b></font>:<font color="#3667A6"><b>~</b></font>$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 003 Device 003: ID 04b8:0142 Seiko Epson Corp. GT-F730 [GT-S630/Perfection V33/V330 Photo] Bus 003 Device 004: ID 214b:7250 Huasheng Electronics USB2.0 HUB Bus 003 Device 005: ID 3277:009d Generic 720p HD Camera Bus 003 Device 007: ID 8087:0026 Intel Corp. AX201 Bluetooth Bus 003 Device 008: ID 275d:0ba6 USB OPTICAL MOUSE Bus 003 Device 009: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub <font color="#4E9A06"><b>dick@dick-750XGK</b></font>:<font color="#3667A6"><b>~</b></font>$ id uid=1000(dick) gid=1000(dick) groups=1000(dick),4(adm),7(lp),24(cdrom),27(sudo),30(dip),46(plugdev),100(users),111(lpadmin),114(lxd) <font color="#4E9A06"><b>dick@dick-750XGK</b></font>:<font color="#3667A6"><b>~</b></font>$ ^C <font color="#4E9A06"><b>dick@dick-750XGK</b></font>:<font color="#3667A6"><b>~</b></font>$ </pre> Bearbeitet von Berlin_1946: Bitte verwende in Zukunft Codeblöcke, um die Übersicht im Forum zu verbessern! |
|
Supporter
Anmeldungsdatum: Beiträge: 9135 |
Gehts noch? Das kann kein Mensch lesen geschweige denn nachbearbeiten. Ausgabe gehören IMMER vollständig inkl. Befehlseingabe in einen >> Codeblock <<. Und zwar je 1 Befehl in einen einzelnen. Hier ein Beispiel: schwarzheit@hp455g9:~$ date Sa 3. Okt 18:15:18 CEST 2026 schwarzheit@hp455g9:~$ Und den Vorschaubutton darf man auch benutzen. Damit man sieht was aus dem eigenen Text wird. Denn dazu isser da! |
|
Supporter, Wikiteam
Anmeldungsdatum: Beiträge: 10841 |
👍
Das steht auch auf der Seite. |
|
Anmeldungsdatum: Beiträge: 14617 |
|
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 62 |
ick@dick-750XGK:~$ export SANE_DEBUG_DLL=255 && scanimage -L [15:51:13.115759] [sanei_debug] Setting debug level of dll to 255. [15:51:13.115894] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.2.1-debian [15:51:13.115919] [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [15:51:13.115985] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [15:51:13.116013] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [15:51:13.116065] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [15:51:13.116104] [dll] sane_init/read_config: reading dll.d/hplip [15:51:13.116136] [dll] add_backend: adding backend `hpaio' [15:51:13.116156] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/airscan [15:51:13.116182] [dll] sane_init/read_config: reading dll.d/airscan [15:51:13.116202] [dll] add_backend: adding backend `airscan' [15:51:13.116217] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/epsonscan2 [15:51:13.116248] [dll] sane_init/read_config: reading dll.d/epsonscan2 [15:51:13.116267] [dll] add_backend: adding backend `epsonscan2' [15:51:13.116290] [dll] sane_init/read_dlld: done. [15:51:13.116323] [dll] sane_init/read_config: reading dll.conf [15:51:13.116353] [dll] add_backend: adding backend `net' [15:51:13.116364] [dll] add_backend: adding backend `abaton' [15:51:13.116373] [dll] add_backend: adding backend `agfafocus' [15:51:13.116381] [dll] add_backend: adding backend `apple' [15:51:13.116390] [dll] add_backend: adding backend `artec' [15:51:13.116398] [dll] add_backend: adding backend `artec_eplus48u' [15:51:13.116413] [dll] add_backend: adding backend `as6e' [15:51:13.116432] [dll] add_backend: adding backend `avision' [15:51:13.116444] [dll] add_backend: adding backend `bh' [15:51:13.116453] [dll] add_backend: adding backend `canon' [15:51:13.116464] [dll] add_backend: adding backend `canon630u' [15:51:13.116475] [dll] add_backend: adding backend `canon_dr' [15:51:13.116487] [dll] add_backend: adding backend `canon_lide70' [15:51:13.116503] [dll] add_backend: adding backend `cardscan' [15:51:13.116515] [dll] add_backend: adding backend `coolscan' [15:51:13.116528] [dll] add_backend: adding backend `coolscan3' [15:51:13.116540] [dll] add_backend: adding backend `dell1600n_net' [15:51:13.116553] [dll] add_backend: adding backend `dmc' [15:51:13.116565] [dll] add_backend: adding backend `epjitsu' [15:51:13.116576] [dll] add_backend: adding backend `epson2' [15:51:13.116587] [dll] add_backend: adding backend `epsonds' [15:51:13.116600] [dll] add_backend: adding backend `escl' [15:51:13.116609] [dll] add_backend: adding backend `fujitsu' [15:51:13.116617] [dll] add_backend: adding backend `genesys' [15:51:13.116635] [dll] add_backend: adding backend `gt68xx' [15:51:13.116644] [dll] add_backend: adding backend `hp' [15:51:13.116652] [dll] add_backend: adding backend `hp3500' [15:51:13.116684] [dll] add_backend: adding backend `hp3900' [15:51:13.116700] [dll] add_backend: adding backend `hp4200' [15:51:13.116712] [dll] add_backend: adding backend `hp5400' [15:51:13.116723] [dll] add_backend: adding backend `hp5590' [15:51:13.116734] [dll] add_backend: adding backend `hpljm1005' [15:51:13.116745] [dll] add_backend: adding backend `hpsj5s' [15:51:13.116756] [dll] add_backend: adding backend `hs2p' [15:51:13.116767] [dll] add_backend: adding backend `ibm' [15:51:13.116778] [dll] add_backend: adding backend `kodak' [15:51:13.116791] [dll] add_backend: adding backend `kodakaio' [15:51:13.116804] [dll] add_backend: adding backend `kvs1025' [15:51:13.116817] [dll] add_backend: adding backend `kvs20xx' [15:51:13.116831] [dll] add_backend: adding backend `kvs40xx' [15:51:13.116842] [dll] add_backend: adding backend `leo' [15:51:13.116854] [dll] add_backend: adding backend `lexmark' [15:51:13.116865] [dll] add_backend: adding backend `ma1509' [15:51:13.116877] [dll] add_backend: adding backend `magicolor' [15:51:13.116889] [dll] add_backend: adding backend `matsushita' [15:51:13.116902] [dll] add_backend: adding backend `microtek' [15:51:13.116914] [dll] add_backend: adding backend `microtek2' [15:51:13.116927] [dll] add_backend: adding backend `mustek' [15:51:13.116941] [dll] add_backend: adding backend `mustek_usb' [15:51:13.116953] [dll] add_backend: adding backend `mustek_usb2' [15:51:13.116965] [dll] add_backend: adding backend `nec' [15:51:13.116988] [dll] add_backend: adding backend `niash' [15:51:13.117001] [dll] add_backend: adding backend `pie' [15:51:13.117013] [dll] add_backend: adding backend `pieusb' [15:51:13.117027] [dll] add_backend: adding backend `pint' [15:51:13.117039] [dll] add_backend: adding backend `pixma' [15:51:13.117053] [dll] add_backend: adding backend `plustek' [15:51:13.117067] [dll] add_backend: adding backend `qcam' [15:51:13.117079] [dll] add_backend: adding backend `ricoh' [15:51:13.117092] [dll] add_backend: adding backend `ricoh2' [15:51:13.117105] [dll] add_backend: adding backend `rts8891' [15:51:13.117118] [dll] add_backend: adding backend `s9036' [15:51:13.117130] [dll] add_backend: adding backend `sceptre' [15:51:13.117143] [dll] add_backend: adding backend `sharp' [15:51:13.117155] [dll] add_backend: adding backend `sm3600' [15:51:13.117167] [dll] add_backend: adding backend `sm3840' [15:51:13.117180] [dll] add_backend: adding backend `snapscan' [15:51:13.117192] [dll] add_backend: adding backend `sp15c' [15:51:13.117206] [dll] add_backend: adding backend `tamarack' [15:51:13.117218] [dll] add_backend: adding backend `teco1' [15:51:13.117252] [dll] add_backend: adding backend `teco2' [15:51:13.117266] [dll] add_backend: adding backend `teco3' [15:51:13.117281] [dll] add_backend: adding backend `u12' [15:51:13.117295] [dll] add_backend: adding backend `umax' [15:51:13.117314] [dll] add_backend: adding backend `umax1220u' [15:51:13.117329] [dll] add_backend: adding backend `v4l' [15:51:13.117341] [dll] add_backend: adding backend `xerox_mfp' [15:51:13.117392] [dll] sane_get_devices [15:51:13.117424] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.117437] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [15:51:13.117468] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [15:51:13.117706] [dll] init: initializing backend `xerox_mfp' [15:51:13.129822] [dll] init: backend `xerox_mfp' is version 1.0.13 [15:51:13.129952] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.129961] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [15:51:13.129976] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [15:51:13.130376] [dll] init: initializing backend `v4l' [15:51:13.235859] [dll] init: backend `v4l' is version 1.0.5 [15:51:13.235902] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.235912] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [15:51:13.235946] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [15:51:13.236150] [dll] init: initializing backend `umax1220u' [15:51:13.245054] [dll] init: backend `umax1220u' is version 1.0.2 [15:51:13.245082] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.245089] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [15:51:13.245104] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [15:51:13.245356] [dll] init: initializing backend `umax' [15:51:13.252510] [dll] init: backend `umax' is version 1.0.45 [15:51:13.252533] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.252540] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [15:51:13.252553] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [15:51:13.252775] [dll] init: initializing backend `u12' [15:51:13.260003] [dll] init: backend `u12' is version 1.0.0 [15:51:13.260027] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.260034] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [15:51:13.260046] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [15:51:13.260177] [dll] init: initializing backend `teco3' [15:51:13.260285] [dll] init: backend `teco3' is version 1.0.1 [15:51:13.260294] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.260299] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [15:51:13.260313] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [15:51:13.260417] [dll] init: initializing backend `teco2' [15:51:13.260496] [dll] init: backend `teco2' is version 1.0.10 [15:51:13.260504] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.260509] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [15:51:13.260519] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [15:51:13.260590] [dll] init: initializing backend `teco1' [15:51:13.260660] [dll] init: backend `teco1' is version 1.0.10 [15:51:13.260667] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.260675] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [15:51:13.260688] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [15:51:13.260773] [dll] init: initializing backend `tamarack' [15:51:13.260818] [dll] init: backend `tamarack' is version 1.0.0 [15:51:13.260828] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.260835] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [15:51:13.260844] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [15:51:13.260918] [dll] init: initializing backend `sp15c' [15:51:13.260950] [dll] init: backend `sp15c' is version 1.0.0 [15:51:13.260957] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.260964] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [15:51:13.260975] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [15:51:13.261105] [dll] init: initializing backend `snapscan' [15:51:13.267970] [dll] init: backend `snapscan' is version 1.4.53 [15:51:13.267991] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.267998] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [15:51:13.268011] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [15:51:13.268202] [dll] init: initializing backend `sm3840' [15:51:13.275055] [dll] init: backend `sm3840' is version 1.0.0 [15:51:13.275074] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.275081] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [15:51:13.275098] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [15:51:13.275287] [dll] init: initializing backend `sm3600' [15:51:13.281786] [dll] init: backend `sm3600' is version 1.0.6 [15:51:13.281808] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.281815] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [15:51:13.281835] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [15:51:13.281998] [dll] init: initializing backend `sharp' [15:51:13.282070] [dll] init: backend `sharp' is version 1.0.0 [15:51:13.282078] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.282085] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [15:51:13.282099] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [15:51:13.282184] [dll] init: initializing backend `sceptre' [15:51:13.282250] [dll] init: backend `sceptre' is version 1.0.10 [15:51:13.282259] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.282264] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [15:51:13.282273] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [15:51:13.282348] [dll] init: initializing backend `s9036' [15:51:13.282385] [dll] init: backend `s9036' is version 1.0.0 [15:51:13.282390] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.282400] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [15:51:13.282410] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [15:51:13.282543] [dll] init: initializing backend `rts8891' [15:51:13.289102] [dll] init: backend `rts8891' is version 1.0.2401 [15:51:13.289160] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.289166] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1' [15:51:13.289177] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1' [15:51:13.289367] [dll] init: initializing backend `ricoh2' [15:51:13.295220] [dll] init: backend `ricoh2' is version 1.0.0 [15:51:13.295241] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.295248] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [15:51:13.295264] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [15:51:13.295384] [dll] init: initializing backend `ricoh' [15:51:13.295432] [dll] init: backend `ricoh' is version 1.0.0 [15:51:13.295441] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.295446] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [15:51:13.295455] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [15:51:13.295536] [dll] init: initializing backend `qcam' [15:51:13.295560] [dll] init: backend `qcam' is version 1.0.0 [15:51:13.295565] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.295569] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [15:51:13.295581] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [15:51:13.295691] [dll] init: initializing backend `plustek' [15:51:13.301066] [dll] init: backend `plustek' is version 1.0.0 [15:51:13.301081] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.301086] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [15:51:13.301096] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [15:51:13.301295] [dll] init: initializing backend `pixma' [15:51:13.306685] [dll] init: backend `pixma' is version 1.0.28 [15:51:13.828454] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.828555] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' [15:51:13.828602] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory) [15:51:13.828621] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1' [15:51:13.828641] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory) [15:51:13.828658] [dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1' [15:51:13.828681] [dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory) [15:51:13.828702] [dll] load: couldn't find backend `pint' (No such file or directory) [15:51:13.828720] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.828739] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1' [15:51:13.828816] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1' [15:51:13.829618] [dll] init: initializing backend `pieusb' [15:51:13.838678] [dll] init: backend `pieusb' is version 1.0.1 [15:51:13.838703] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.838708] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [15:51:13.838720] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [15:51:13.838897] [dll] init: initializing backend `pie' [15:51:13.838950] [dll] init: backend `pie' is version 1.0.9 [15:51:13.838956] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.838960] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [15:51:13.838968] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [15:51:13.839073] [dll] init: initializing backend `niash' [15:51:13.844462] [dll] init: backend `niash' is version 1.0.1 [15:51:13.844481] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.844486] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [15:51:13.844503] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [15:51:13.844625] [dll] init: initializing backend `nec' [15:51:13.844681] [dll] init: backend `nec' is version 1.0.0 [15:51:13.844687] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.844691] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [15:51:13.844702] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [15:51:13.844814] [dll] init: initializing backend `mustek_usb2' [15:51:13.844827] [dll] init: backend `mustek_usb2' is version 1.0.10 [15:51:13.850020] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.850030] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [15:51:13.850043] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [15:51:13.850158] [dll] init: initializing backend `mustek_usb' [15:51:13.855558] [dll] init: backend `mustek_usb' is version 1.0.18 [15:51:13.855574] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.855579] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [15:51:13.855589] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [15:51:13.855803] [dll] init: initializing backend `mustek' [15:51:13.855951] [dll] init: backend `mustek' is version 1.0.138 [15:51:13.855958] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.855963] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [15:51:13.855973] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [15:51:13.856057] [dll] init: initializing backend `microtek2' [15:51:13.856104] [dll] init: backend `microtek2' is version 1.0.0 [15:51:13.856112] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.856117] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [15:51:13.856126] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [15:51:13.856199] [dll] init: initializing backend `microtek' [15:51:13.856244] [dll] init: backend `microtek' is version 1.0.0 [15:51:13.856253] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.856259] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [15:51:13.856270] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [15:51:13.856329] [dll] init: initializing backend `matsushita' [15:51:13.856383] [dll] init: backend `matsushita' is version 1.0.7 [15:51:13.856389] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:13.856395] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [15:51:13.856405] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [15:51:13.857762] [dll] init: initializing backend `magicolor' [15:51:13.863119] [dll] init: backend `magicolor' is version 1.0.1 [15:51:15.379419] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:15.379499] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [15:51:15.379580] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [15:51:15.380381] [dll] init: initializing backend `ma1509' [15:51:15.394538] [dll] init: backend `ma1509' is version 1.0.3 [15:51:15.394576] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:15.394585] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [15:51:15.394604] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [15:51:15.394869] [dll] init: initializing backend `lexmark' [15:51:15.401812] [dll] init: backend `lexmark' is version 1.0.32 [15:51:15.401866] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:15.401872] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [15:51:15.401883] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [15:51:15.402087] [dll] init: initializing backend `leo' [15:51:15.402198] [dll] init: backend `leo' is version 1.0.11 [15:51:15.402207] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:15.402212] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1' [15:51:15.402236] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1' [15:51:15.402450] [dll] init: initializing backend `kvs40xx' [15:51:15.409253] [dll] init: backend `kvs40xx' is version 1.0.1 [15:51:15.409290] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:15.409296] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [15:51:15.409312] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [15:51:15.409478] [dll] init: initializing backend `kvs20xx' [15:51:15.416082] [dll] init: backend `kvs20xx' is version 1.0.2 [15:51:15.416129] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:15.416140] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [15:51:15.416158] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [15:51:15.416351] [dll] init: initializing backend `kvs1025' [15:51:15.424097] [dll] init: backend `kvs1025' is version 1.0.5 [15:51:15.424132] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:15.424145] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [15:51:15.424192] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' [15:51:15.425508] [dll] init: initializing backend `kodakaio' [15:51:15.432130] [dll] init: backend `kodakaio' is version 1.0.3 [15:51:17.363572] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.363667] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [15:51:17.363775] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [15:51:17.364467] [dll] init: initializing backend `kodak' [15:51:17.364517] [dll] init: backend `kodak' is version 1.0.7 [15:51:17.364724] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.364755] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [15:51:17.364796] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [15:51:17.365134] [dll] init: initializing backend `ibm' [15:51:17.365634] [dll] init: backend `ibm' is version 1.0.0 [15:51:17.365705] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.365721] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [15:51:17.365793] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [15:51:17.366312] [dll] init: initializing backend `hs2p' [15:51:17.366446] [dll] init: backend `hs2p' is version 1.0.0 [15:51:17.366461] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.366472] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [15:51:17.366489] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [15:51:17.366690] [dll] init: initializing backend `hpsj5s' [15:51:17.366770] [dll] init: backend `hpsj5s' is version 1.0.3 [15:51:17.366782] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.366792] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [15:51:17.366826] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [15:51:17.367073] [dll] init: initializing backend `hpljm1005' [15:51:17.379126] [dll] init: backend `hpljm1005' is version 1.0.1 [15:51:17.379171] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.379183] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [15:51:17.379246] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [15:51:17.379533] [dll] init: initializing backend `hp5590' [15:51:17.386810] [dll] init: backend `hp5590' is version 1.0.8 [15:51:17.386827] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.386834] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [15:51:17.386851] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [15:51:17.387028] [dll] init: initializing backend `hp5400' [15:51:17.393998] [dll] init: backend `hp5400' is version 1.0.3 [15:51:17.394016] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.394023] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [15:51:17.394035] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [15:51:17.394200] [dll] init: initializing backend `hp4200' [15:51:17.401251] [dll] init: backend `hp4200' is version 1.0.0 [15:51:17.401273] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.401279] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [15:51:17.401291] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [15:51:17.403663] [dll] init: initializing backend `hp3900' [15:51:17.411231] [dll] init: backend `hp3900' is version 1.0.0 [15:51:17.411257] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.411263] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [15:51:17.411276] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [15:51:17.411480] [dll] init: initializing backend `hp3500' [15:51:17.418550] [dll] init: backend `hp3500' is version 1.0.0 [15:51:17.418573] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.418581] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [15:51:17.418600] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [15:51:17.418843] [dll] init: initializing backend `hp' [15:51:17.418929] [dll] init: backend `hp' is version 1.0.8 [15:51:17.425867] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.425886] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [15:51:17.425907] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [15:51:17.426095] [dll] init: initializing backend `gt68xx' [15:51:17.432329] [dll] init: backend `gt68xx' is version 1.0.84 [15:51:17.432416] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.432423] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [15:51:17.432433] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [15:51:17.432837] [dll] init: initializing backend `genesys' [15:51:17.439923] [dll] init: backend `genesys' is version 1.0.0 [15:51:17.440028] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.440034] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [15:51:17.440045] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [15:51:17.440239] [dll] init: initializing backend `fujitsu' [15:51:17.440256] [dll] init: backend `fujitsu' is version 1.0.140 [15:51:17.446564] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:17.446577] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1' [15:51:17.446590] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1' [15:51:17.459216] [dll] init: initializing backend `escl' [15:51:17.459290] [dll] init: backend `escl' is version 1.0.0 [15:51:18.526167] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:18.526258] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [15:51:18.526337] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1' [15:51:18.527008] [dll] init: initializing backend `epsonds' [15:51:18.541652] [dll] init: backend `epsonds' is version 1.0.0 [15:51:19.558465] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:19.558507] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [15:51:19.558559] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [15:51:19.559028] [dll] init: initializing backend `epson2' [15:51:19.567332] [dll] init: backend `epson2' is version 1.0.124 [15:51:20.568816] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.568886] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [15:51:20.568954] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [15:51:20.569578] [dll] init: initializing backend `epjitsu' [15:51:20.569606] [dll] init: backend `epjitsu' is version 1.0.33 [15:51:20.579474] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.579509] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [15:51:20.579529] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [15:51:20.579820] [dll] init: initializing backend `dmc' [15:51:20.579892] [dll] init: backend `dmc' is version 1.0.0 [15:51:20.579901] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.579908] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [15:51:20.579927] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [15:51:20.580138] [dll] init: initializing backend `dell1600n_net' [15:51:20.580148] [dll] init: backend `dell1600n_net' is version 1.0.0 [15:51:20.886290] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.886391] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [15:51:20.886526] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [15:51:20.887343] [dll] init: initializing backend `coolscan3' [15:51:20.899500] [dll] init: backend `coolscan3' is version 1.0.0 [15:51:20.899650] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.899666] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [15:51:20.899686] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [15:51:20.899996] [dll] init: initializing backend `coolscan' [15:51:20.900078] [dll] init: backend `coolscan' is version 1.0.0 [15:51:20.900087] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.900094] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [15:51:20.900106] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [15:51:20.900257] [dll] init: initializing backend `cardscan' [15:51:20.908189] [dll] init: backend `cardscan' is version 1.0.3 [15:51:20.908270] [dll] load: searching backend `canon_lide70' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.908278] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1' [15:51:20.908291] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1' [15:51:20.908520] [dll] init: initializing backend `canon_lide70' [15:51:20.915054] [dll] init: backend `canon_lide70' is version 1.0.0 [15:51:20.915069] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.915076] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [15:51:20.915088] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [15:51:20.915286] [dll] init: initializing backend `canon_dr' [15:51:20.915305] [dll] init: backend `canon_dr' is version 1.0.65 [15:51:20.922401] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.922425] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [15:51:20.922441] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [15:51:20.922726] [dll] init: initializing backend `canon630u' [15:51:20.929603] [dll] init: backend `canon630u' is version 1.0.1 [15:51:20.929625] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.929633] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [15:51:20.929646] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [15:51:20.929859] [dll] init: initializing backend `canon' [15:51:20.929909] [dll] init: backend `canon' is version 1.0.0 [15:51:20.929916] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.929923] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [15:51:20.929934] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [15:51:20.930042] [dll] init: initializing backend `bh' [15:51:20.930095] [dll] init: backend `bh' is version 1.0.4 [15:51:20.930101] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.930107] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [15:51:20.930118] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [15:51:20.930309] [dll] init: initializing backend `avision' [15:51:20.937452] [dll] init: backend `avision' is version 1.0.297 [15:51:20.937775] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.937783] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [15:51:20.937797] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [15:51:20.937976] [dll] init: initializing backend `as6e' [15:51:20.938025] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.938033] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [15:51:20.938055] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [15:51:20.938202] [dll] init: initializing backend `artec_eplus48u' [15:51:20.945077] [dll] init: backend `artec_eplus48u' is version 1.0.0 [15:51:20.945092] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.945098] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [15:51:20.945110] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [15:51:20.945277] [dll] init: initializing backend `artec' [15:51:20.945343] [dll] init: backend `artec' is version 1.0.0 [15:51:20.945351] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.945356] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [15:51:20.945365] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [15:51:20.945459] [dll] init: initializing backend `apple' [15:51:20.945501] [dll] init: backend `apple' is version 1.0.0 [15:51:20.945507] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.945511] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [15:51:20.945522] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [15:51:20.945626] [dll] init: initializing backend `agfafocus' [15:51:20.945676] [dll] init: backend `agfafocus' is version 1.0.0 [15:51:20.945683] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.945689] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [15:51:20.945698] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [15:51:20.945787] [dll] init: initializing backend `abaton' [15:51:20.945832] [dll] init: backend `abaton' is version 1.0.0 [15:51:20.945838] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.945844] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [15:51:20.945857] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [15:51:20.945984] [dll] init: initializing backend `net' [15:51:20.949388] [dll] init: backend `net' is version 1.2.1 [15:51:20.949414] [dll] load: searching backend `epsonscan2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:20.949420] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonscan2.so.1' [15:51:20.949451] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonscan2.so.1' [15:51:20.950275] [dll] init: initializing backend `epsonscan2' [15:51:20.950299] [dll] init: backend `epsonscan2' is version 1.1.0 [15:51:21.161448] [dll] load: searching backend `airscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:21.161474] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-airscan.so.1' [15:51:21.161483] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-airscan.so.1' [15:51:21.161892] [dll] init: initializing backend `airscan' [15:51:21.167115] [dll] init: backend `airscan' is version 1.0.0 [15:51:22.178184] [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane' [15:51:22.178256] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [15:51:22.178331] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [15:51:22.180111] [dll] init: initializing backend `hpaio' [15:51:22.181414] [dll] init: backend `hpaio' is version 1.0.0 [15:51:22.218475] [dll] sane_get_devices: found 2 devices device `v4l:/dev/video0' is a Noname 720p HD Camera: 720p HD Camera virtual device device `epsonscan2:EPSON Perfection V33/V330:003:003:esci2:usb:ES00AD:322' is a EPSON EPSON Perfection V33/V330:003:003 flatbed scanner [15:51:22.218551] [dll] sane_exit: exiting [15:51:22.218566] [dll] sane_exit: calling backend `xerox_mfp's exit function [15:51:22.218879] [dll] sane_exit: calling backend `v4l's exit function [15:51:22.219240] [dll] sane_exit: calling backend `umax1220u's exit function [15:51:22.219400] [dll] sane_exit: calling backend `umax's exit function [15:51:22.219588] [dll] sane_exit: calling backend `u12's exit function [15:51:22.219707] [dll] sane_exit: calling backend `teco3's exit function [15:51:22.219814] [dll] sane_exit: calling backend `teco2's exit function [15:51:22.219914] [dll] sane_exit: calling backend `teco1's exit function [15:51:22.220014] [dll] sane_exit: calling backend `tamarack's exit function [15:51:22.220106] [dll] sane_exit: calling backend `sp15c's exit function [15:51:22.220204] [dll] sane_exit: calling backend `snapscan's exit function [15:51:22.220337] [dll] sane_exit: calling backend `sm3840's exit function [15:51:22.220453] [dll] sane_exit: calling backend `sm3600's exit function [15:51:22.220546] [dll] sane_exit: calling backend `sharp's exit function [15:51:22.220633] [dll] sane_exit: calling backend `sceptre's exit function [15:51:22.220732] [dll] sane_exit: calling backend `s9036's exit function [15:51:22.220820] [dll] sane_exit: calling backend `rts8891's exit function [15:51:22.220931] [dll] sane_exit: calling backend `ricoh2's exit function [15:51:22.221062] [dll] sane_exit: calling backend `ricoh's exit function [15:51:22.221146] [dll] sane_exit: calling backend `qcam's exit function [15:51:22.221241] [dll] sane_exit: calling backend `plustek's exit function [15:51:22.221435] [dll] sane_exit: calling backend `pixma's exit function [15:51:22.221591] [dll] sane_exit: calling backend `pieusb's exit function [15:51:22.221680] [dll] sane_exit: calling backend `pie's exit function [15:51:22.221775] [dll] sane_exit: calling backend `niash's exit function [15:51:22.221867] [dll] sane_exit: calling backend `nec's exit function [15:51:22.221952] [dll] sane_exit: calling backend `mustek_usb2's exit function [15:51:22.222052] [dll] sane_exit: calling backend `mustek_usb's exit function [15:51:22.222136] [dll] sane_exit: calling backend `mustek's exit function [15:51:22.222246] [dll] sane_exit: calling backend `microtek2's exit function [15:51:22.222334] [dll] sane_exit: calling backend `microtek's exit function [15:51:22.222432] [dll] sane_exit: calling backend `matsushita's exit function [15:51:22.222500] [dll] sane_exit: calling backend `magicolor's exit function [15:51:22.222672] [dll] sane_exit: calling backend `ma1509's exit function [15:51:22.222757] [dll] sane_exit: calling backend `lexmark's exit function [15:51:22.222873] [dll] sane_exit: calling backend `leo's exit function [15:51:22.222968] [dll] sane_exit: calling backend `kvs40xx's exit function [15:51:22.223055] [dll] sane_exit: calling backend `kvs20xx's exit function [15:51:22.223144] [dll] sane_exit: calling backend `kvs1025's exit function [15:51:22.223279] [dll] sane_exit: calling backend `kodakaio's exit function [15:51:22.223385] [dll] sane_exit: calling backend `kodak's exit function [15:51:22.223467] [dll] sane_exit: calling backend `ibm's exit function [15:51:22.223538] [dll] sane_exit: calling backend `hs2p's exit function [15:51:22.223622] [dll] sane_exit: calling backend `hpsj5s's exit function [15:51:22.223742] [dll] sane_exit: calling backend `hpljm1005's exit function [15:51:22.223830] [dll] sane_exit: calling backend `hp5590's exit function [15:51:22.223910] [dll] sane_exit: calling backend `hp5400's exit function [15:51:22.223994] [dll] sane_exit: calling backend `hp4200's exit function [15:51:22.224071] [dll] sane_exit: calling backend `hp3900's exit function [15:51:22.224161] [dll] sane_exit: calling backend `hp3500's exit function [15:51:22.224268] [dll] sane_exit: calling backend `hp's exit function [15:51:22.224355] [dll] sane_exit: calling backend `gt68xx's exit function [15:51:22.224486] [dll] sane_exit: calling backend `genesys's exit function [15:51:22.224969] [dll] sane_exit: calling backend `fujitsu's exit function [15:51:22.225078] [dll] sane_exit: calling backend `escl's exit function [15:51:22.226859] [dll] sane_exit: calling backend `epsonds's exit function [15:51:22.226997] [dll] sane_exit: calling backend `epson2's exit function [15:51:22.227074] [dll] sane_exit: calling backend `epjitsu's exit function [15:51:22.227133] [dll] sane_exit: calling backend `dmc's exit function [15:51:22.227181] [dll] sane_exit: calling backend `dell1600n_net's exit function [15:51:22.227242] [dll] sane_exit: calling backend `coolscan3's exit function [15:51:22.227290] [dll] sane_exit: calling backend `coolscan's exit function [15:51:22.227335] [dll] sane_exit: calling backend `cardscan's exit function [15:51:22.227387] [dll] sane_exit: calling backend `canon_lide70's exit function [15:51:22.227427] [dll] sane_exit: calling backend `canon_dr's exit function [15:51:22.227470] [dll] sane_exit: calling backend `canon630u's exit function [15:51:22.227510] [dll] sane_exit: calling backend `canon's exit function [15:51:22.227547] [dll] sane_exit: calling backend `bh's exit function [15:51:22.227584] [dll] sane_exit: calling backend `avision's exit function [15:51:22.227652] [dll] sane_exit: calling backend `artec_eplus48u's exit function [15:51:22.227690] [dll] sane_exit: calling backend `artec's exit function [15:51:22.227730] [dll] sane_exit: calling backend `apple's exit function [15:51:22.227809] [dll] sane_exit: calling backend `agfafocus's exit function [15:51:22.227850] [dll] sane_exit: calling backend `abaton's exit function [15:51:22.227884] [dll] sane_exit: calling backend `net's exit function [15:51:22.228810] [dll] sane_exit: calling backend `epsonscan2's exit function [15:51:22.228870] [dll] sane_exit: calling backend `airscan's exit function [15:51:22.230672] [dll] sane_exit: calling backend `hpaio's exit function [15:51:22.231198] [dll] sane_exit: finished dick@dick-750XGK:~$ sorry ich habe das mit dem CODEBLOCK nicht gewusst Bearbeitet von schwarzheit: Forensyntax korrigiert. |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 62 |
dick@dick-750XGK:~$ sudo dpkg -l *sane* | grep ii [sudo: authenticate] Passwort: ii libsane-common 1.4.0-1ubuntu1 all API library for scanners -- documentation and support files ii libsane-hpaio:amd64 3.24.4+dfsg0-0ubuntu8.1 amd64 HP SANE backend for multi-function peripherals ii libsane1:amd64 1.4.0-1ubuntu1 amd64 API library for scanners ii sane-airscan 0.99.36-2ubuntu1 amd64 SANE backend for AirScan (eSCL) and WSD document scanner ii sane-utils 1.4.0-1ubuntu1 amd64 API library for scanners -- utilities ii xsane 0.999-13 amd64 featureful graphical frontend for SANE (Scanner Access Now Easy) ii xsane-common 0.999-13 all xsane architecture independent files |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 62 |
dick@dick-750XGK:~$ sudo dpkg -l | egrep 'iscan*|esci-*|epson' ii epsonscan2 6.6.40.0-1 amd64 This is scanner driver. dick@dick-750XGK:~$ Und so weiter machen? Bearbeitet von schwarzheit: Forensyntax korrigiert. |
|
Supporter
Anmeldungsdatum: Beiträge: 9135 |
Es ist nicht nötig für jeden Codeblock einen neuen Post zu erstellen. Man kann auch mehrere Codeblöcke in einen setzen. Und man schreibt nicht selbst noch was zusätzliches in den Codeblock rein. Ausserdem hat dir von.wert ja schon gesagt was zu tun ist. |
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 62 |
dick@dick-750XGK:~$ sudo apt purge ipp*usb* && sudo apt install libusb-0.1-4 Hinweis: »ipp-usb« wird für das Suchmuster »ipp*usb*« gewählt. Paket »ipp-usb« ist nicht installiert, wird also auch nicht entfernt. Zusammenfassung: Aktualisiere: 0, Installiere: 0, Entferne: 0, Aktualisiere nicht: 3 libusb-0.1-4 ist schon die neueste Version (2:0.1.12-35build2). Zusammenfassung: Aktualisiere: 0, Installiere: 0, Entferne: 0, Aktualisiere nicht: 3 Rechner neu gestartet. Kommunikation mit dem Scanner nicht möglich. Sicherstellen, dass der Scanner mit dem Computer verbunden und eingeschaltet ist. |
|
Anmeldungsdatum: Beiträge: 401 |
Deine Xubuntu Version scheint nicht 24.04 zu sein, wie angegeben. Die Paketversionen deiner Angaben zeugen von Xubuntu 26.04. Zeige einmal die Ausgabe von lsb_release -a
|
|
(Themenstarter)
Anmeldungsdatum: Beiträge: 62 |
dick@dick-750XGK:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 26.04.1 LTS Release: 26.04 Codename: resolute dick@dick-750XGK:~$ |
