ubuntuusers.de

Hallo

gibt es für das beschriebene Problem mittlerweile eine Lösung? Bekomme den Stick leider auch nicht zum laufen. Im syslog wird er erkannt aber hier:

cat /proc/bus/input/devices

ist er nicht sichtbar. Auch irw und xev geben nichts aus.

Hab außerdem noch den Dateiaustausch via Handy ausprobiert:

Mit ircp lassen sich Daten vom PC aufs Handy versenden. Die andere Richtung funktioniert allerdings nicht.

Ich habe genau das selbe Problem und komme nicht weiter.

So ist es auch bei mir: Im Syslog ist es sichtbar, aber nicht in /proc/bus/input/devices.

Siehe auch hier: http://forum.ubuntuusers.de/topic/i-tec-usb-infrarot-adapter-mit-apple-remote-mc/

Habt Ihr inzwischen etwas rausgefunden?

Ich denke ich habe die Antwort für das Problem gefunden: Ich habe den falschen USB-Empfänger gekauft. Mehr Infos siehe hier: http://forum.ubuntuusers.de/post/2799486/

Es gibt aber auch für USB LIRC kompatible Empfänger, diese kann man der LIRC-Homepage entnehmen. Davon kann man einige immer noch käuflich erwerben. Einen fertigen, sehr minimalistischen IgorPlug-USB Nachbau für wenig Geld gibts z.B. hier: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=110545430714

Ciao

Timo

Genau diesen habe ich mir nun gekauft ! Leider liefert

cat /proc/bus/input/devices 

mir aber leider nichts. Laut LIRC Homepage muss man dafür eine Spezielle angabe beim aufruf von lirc machen und es muss lirc_dev , lirc_igorplugusb module geladen/installiert sein.

Wie macht man das ? Bin schon die ganze zeit hier am lesen und suchen, aber ich komm so nicht weiter ☹

Ausgabe von lsusb :

Bus 002 Device 007: ID 03eb:0002 Atmel Corp. 
Bus 002 Device 002: ID 1bcf:053a Sunplus Innovation Technology Inc. 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Es wird also ein Atmel Gerät erkannt.

Ausgabe von dmesg (IR Empfänger NICHT angeschlossen) :

[ 4470.998137]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4470.998143]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4470.998149]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4485.716046] usb 1-8: new high speed USB device using ehci_hcd and address 4
[ 4486.076355] phy1: Selected rate control algorithm 'minstrel'
[ 4486.078621] phy1: hwaddr 00:e0:4c:12:0c:69, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 4486.090764] rtl8187: Customer ID is 0xFF
[ 4486.090836] Registered led device: rtl8187-phy1::radio
[ 4486.090872] Registered led device: rtl8187-phy1::tx
[ 4486.090906] Registered led device: rtl8187-phy1::rx
[ 4486.094283] rtl8187: wireless switch is on
[ 4488.318000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4492.602309] wlan0: authenticate with 00:1c:4a:d3:38:e7 (try 1)
[ 4492.605619] wlan0: authenticated
[ 4492.661880] wlan0: associate with 00:1c:4a:d3:38:e7 (try 1)
[ 4492.860055] wlan0: associate with 00:1c:4a:d3:38:e7 (try 2)
[ 4492.864652] wlan0: RX AssocResp from 00:1c:4a:d3:38:e7 (capab=0x411 status=0 aid=1)
[ 4492.864659] wlan0: associated
[ 4492.927466] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4503.168028] wlan0: no IPv6 routers present
[ 5452.685725] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 5452.898325] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 5454.303030] wlan0: deauthenticating from 00:1c:4a:d3:38:e7 by local choice (reason=3)
[ 5454.357494] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 5454.357500] cfg80211: Restoring regulatory settings
[ 5454.357503] cfg80211: Calling CRDA to update world regulatory domain
[ 5454.390437] cfg80211: World regulatory domain updated:
[ 5454.390442]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5454.390446]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5454.390449]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5454.390452]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5454.390454]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5454.390457]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5455.115545] PM: Syncing filesystems ... done.
[ 5455.119496] PM: Preparing system for mem sleep
[ 5455.119502] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 5455.132052] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 5455.148038] PM: Entering mem sleep
[ 5455.148053] Suspending console(s) (use no_console_suspend to debug)
[ 5455.148789] sd 3:0:0:0: [sda] Synchronizing SCSI cache
[ 5455.161007] ACPI handle has no context!
[ 5455.161289] parport_pc 00:09: disabled
[ 5455.161499] serial 00:07: disabled
[ 5455.180766] forcedeth 0000:00:0a.0: PCI INT A disabled
[ 5455.180962] Intel ICH 0000:00:04.0: PCI INT A disabled
[ 5455.181072] ohci_hcd 0000:00:02.0: PCI INT A disabled
[ 5455.181095] sata_nv 0000:00:08.0: PCI INT A disabled
[ 5455.572454] PM: suspend of drv:nvidia dev:0000:05:00.0 complete after 410.498 msecs
[ 5455.572475] sd 3:0:0:0: [sda] Stopping disk
[ 5455.572560] PM: suspend of drv:pcieport dev:0000:00:0e.0 complete after 391.913 msecs
[ 5455.684023] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[ 5455.832022] PM: suspend of drv:usb dev:1-8 complete after 683.410 msecs
[ 5455.832043] PM: suspend of drv:usb dev:usb1 complete after 670.095 msecs
[ 5455.848032] ehci_hcd 0000:00:02.1: PCI INT B disabled
[ 5455.848036] PM: suspend of drv:ehci_hcd dev:0000:00:02.1 complete after 667.059 msecs
[ 5455.913686] PM: suspend of drv:sd dev:3:0:0:0 complete after 764.900 msecs
[ 5455.913694] PM: suspend of drv:scsi dev:target3:0:0 complete after 764.835 msecs
[ 5455.913702] PM: suspend of drv:scsi dev:host3 complete after 764.768 msecs
[ 5455.913744] sata_nv 0000:00:07.0: PCI INT A disabled
[ 5455.928023] PM: suspend of drv:sata_nv dev:0000:00:07.0 complete after 747.232 msecs
[ 5455.928031] PM: suspend of drv: dev:pci0000:00 complete after 747.037 msecs
[ 5455.928037] PM: suspend of devices complete after 779.841 msecs
[ 5455.928039] PM: suspend devices took 0.780 seconds
[ 5455.960213] PM: late suspend of devices complete after 32.169 msecs
[ 5455.960277] ACPI: Preparing to enter system sleep state S3
[ 5455.961192] PM: Saving platform NVS memory
[ 5455.961420] Disabling non-boot CPUs ...
[ 5455.961420] Back to C!
[ 5455.961420] PM: Restoring platform NVS memory
[ 5455.961420] ACPI: Waking up from system sleep state S3
[ 5455.961420] pci 0000:00:00.0: restoring config space at offset 0xf (was 0x0, writing 0xff)
[ 5455.961420] ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xfebff000, writing 0x80000000)
[ 5455.961420] ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
[ 5455.961420] ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xfeb00000, writing 0x80005000)
[ 5455.961420] ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[ 5455.961420] sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xfebfc000, writing 0x80002000)
[ 5455.961420] sata_nv 0000:00:07.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
[ 5455.961420] sata_nv 0000:00:08.0: restoring config space at offset 0x9 (was 0xfebfb000, writing 0x80003000)
[ 5455.961420] sata_nv 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
[ 5455.976031] forcedeth 0000:00:0a.0: BAR 0: set to [mem 0x80004000-0x80004fff] (PCI address [0x80004000-0x80004fff]
[ 5455.976035] forcedeth 0000:00:0a.0: BAR 1: set to [io  0xbc00-0xbc07] (PCI address [0xbc00-0xbc07]
[ 5455.976040] forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010105)
[ 5455.976048] forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007)
[ 5455.976068] pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 5455.976108] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 5455.976113] pcieport 0000:00:0b.0: Enabling HT MSI Mapping
[ 5455.976118] pcieport 0000:00:0b.0: Linking AER extended capability
[ 5455.976133] pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 5455.976175] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 5455.976180] pcieport 0000:00:0c.0: Enabling HT MSI Mapping
[ 5455.976184] pcieport 0000:00:0c.0: Linking AER extended capability
[ 5455.976199] pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 5455.976244] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 5455.976248] pcieport 0000:00:0d.0: Enabling HT MSI Mapping
[ 5455.976252] pcieport 0000:00:0d.0: Linking AER extended capability
[ 5455.976267] pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 5455.976315] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 5455.976319] pcieport 0000:00:0e.0: Enabling HT MSI Mapping
[ 5455.976323] pcieport 0000:00:0e.0: Linking AER extended capability
[ 5455.976374] nvidia 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[ 5455.976382] nvidia 0000:05:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xfc000004)
[ 5455.976387] nvidia 0000:05:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c)
[ 5455.976390] nvidia 0000:05:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfb000000)
[ 5455.976395] nvidia 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 5455.976913] PM: early resume of devices complete after 13.451 msecs
[ 5455.977096] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 5455.977101] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 5455.977112] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 5455.977116] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 5455.977127] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 5455.977130] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 5455.977151] pata_amd 0000:00:06.0: setting latency timer to 64
[ 5455.977167] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 5455.977170] sata_nv 0000:00:07.0: setting latency timer to 64
[ 5455.977184] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 5455.977187] sata_nv 0000:00:08.0: setting latency timer to 64
[ 5455.977200] pci 0000:00:09.0: setting latency timer to 64
[ 5456.104553] sd 3:0:0:0: [sda] Starting disk
[ 5456.108121] PM: resume of drv:ohci_hcd dev:0000:00:02.0 complete after 131.028 msecs
[ 5456.108151] PM: resume of drv:ehci_hcd dev:0000:00:02.1 complete after 131.039 msecs
[ 5456.108221] PM: resume of drv:Intel ICH dev:0000:00:04.0 complete after 131.097 msecs
[ 5456.108228] PM: resume of drv: dev:platform complete after 131.154 msecs
[ 5456.109501] serial 00:07: activated
[ 5456.110445] parport_pc 00:09: activated
[ 5456.225444] PM: resume of drv:usb dev:usb1 complete after 120.983 msecs
[ 5456.225454] PM: resume of drv:hub dev:1-0:1.0 complete after 120.990 msecs
[ 5456.225465] PM: resume of drv: dev:ep_81 complete after 114.472 msecs
[ 5456.225768] PM: resume of drv:nvidia dev:0000:05:00.0 complete after 248.109 msecs
[ 5456.240031] PM: resume of drv:usb dev:usb2 complete after 135.562 msecs
[ 5456.240038] PM: resume of drv:hub dev:2-0:1.0 complete after 135.567 msecs
[ 5456.286278] ata1.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 5456.286282] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 5456.288195] PM: resume of drv:usb dev:1-8 complete after 183.616 msecs
[ 5456.288202] PM: resume of drv:usb dev:1-8:1.0 complete after 183.620 msecs
[ 5456.301035] PM: resume of drv:usb dev:2-9 complete after 196.517 msecs
[ 5456.301042] PM: resume of drv:usbhid dev:2-9:1.1 complete after 196.521 msecs
[ 5456.308247] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 5456.308250] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 5456.308276] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x1f)
[ 5456.308280] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x1f)
[ 5456.340197] ata1.00: configured for UDMA/33
[ 5456.356239] ata1.01: configured for UDMA/33
[ 5456.505743] PM: resume of drv:forcedeth dev:0000:00:0a.0 complete after 528.536 msecs
[ 5456.505755] PM: resume of drv:net dev:eth0 complete after 219.249 msecs
[ 5456.856019] ata5: SATA link down (SStatus 0 SControl 300)
[ 5456.856030] ata3: SATA link down (SStatus 0 SControl 300)
[ 5456.856040] ata6: SATA link down (SStatus 0 SControl 300)
[ 5456.964022] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5456.972105] ata4.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[ 5456.980204] ata4.00: configured for UDMA/133
[ 5456.984480] PM: resume of drv:sd dev:3:0:0:0 complete after 879.929 msecs
[ 5456.984487] PM: resume of drv:scsi_device dev:3:0:0:0 complete after 879.912 msecs
[ 5456.984560] PM: resume of drv:scsi_disk dev:3:0:0:0 complete after 478.765 msecs
[ 5456.984752] PM: resume of devices complete after 1007.807 msecs
[ 5457.134727] phy2: Selected rate control algorithm 'minstrel'
[ 5457.135205] phy2: hwaddr 00:e0:4c:12:0c:69, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 5457.146089] rtl8187: Customer ID is 0xFF
[ 5457.146113] Registered led device: rtl8187-phy2::radio
[ 5457.146130] Registered led device: rtl8187-phy2::tx
[ 5457.146146] Registered led device: rtl8187-phy2::rx
[ 5457.146577] rtl8187: wireless switch is on
[ 5457.146701] PM: resume devices took 1.168 seconds
[ 5457.146732] PM: Finishing wakeup.
[ 5457.146734] Restarting tasks ... done.
[ 5457.565078] eth0: no link during initialization.
[ 5457.566002] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5459.649505] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5460.455537] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 5460.633469] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 5463.853050] wlan0: authenticate with 00:1c:4a:d3:38:e7 (try 1)
[ 5463.855667] wlan0: authenticated
[ 5463.909048] wlan0: associate with 00:1c:4a:d3:38:e7 (try 1)
[ 5464.108048] wlan0: associate with 00:1c:4a:d3:38:e7 (try 2)
[ 5464.115690] wlan0: RX AssocResp from 00:1c:4a:d3:38:e7 (capab=0x411 status=0 aid=1)
[ 5464.115696] wlan0: associated
[ 5464.170891] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5474.376021] wlan0: no IPv6 routers present
[10219.980035] usb 2-1: new low speed USB device using ohci_hcd and address 3
[10220.290176] lirc_dev: IR Remote Control driver registered, major 250 
[10220.309909] lirc_igorplugusb: module is from the staging directory, the quality is unknown, you have been warned.
[10220.313534] 
[10220.313538] lirc_igorplugusb: USB remote driver for LIRC v0.1
[10220.313543] lirc_igorplugusb: Jan M. Hochstein <hochstein@algo.informatik.tu-darmstadt.de>
[10220.313787] lirc_igorplugusb 2-1:1.0: lirc_dev: driver lirc_igorplugusb  registered at minor = 0
[10220.348549] lirc_igorplugusb[3]: Ing. Igor Cesko, Copyright(c) 2003 IgorPlug-USB (AVR) on usb2:3
[10220.355887] usbcore: registered new interface driver lirc_igorplugusb
[11181.777758] lirc_igorplugusb[3]: Device buffer overrun.
[11181.993767] lirc_igorplugusb[3]: Device buffer overrun.
[11182.102761] lirc_igorplugusb[3]: Device buffer overrun.
[11182.318759] lirc_igorplugusb[3]: Device buffer overrun.
[11183.248777] lirc_igorplugusb[3]: Device buffer overrun.
[11183.355773] lirc_igorplugusb[3]: Device buffer overrun.
[11183.605776] lirc_igorplugusb[3]: Device buffer overrun.
[11183.712777] lirc_igorplugusb[3]: Device buffer overrun.
[11183.821784] lirc_igorplugusb[3]: Device buffer overrun.
[11184.037782] lirc_igorplugusb[3]: Device buffer overrun.
[11184.197786] lirc_igorplugusb[3]: Device buffer overrun.
[11184.305784] lirc_igorplugusb[3]: Device buffer overrun.
[11185.329800] lirc_igorplugusb[3]: Device buffer overrun.
[11185.544812] lirc_igorplugusb[3]: Device buffer overrun.
[11185.653803] lirc_igorplugusb[3]: Device buffer overrun.
[11185.760805] lirc_igorplugusb[3]: Device buffer overrun.
[11185.948815] lirc_igorplugusb[3]: Device buffer overrun.
[11186.163820] lirc_igorplugusb[3]: Device buffer overrun.
[11186.273812] lirc_igorplugusb[3]: Device buffer overrun.
[11186.381814] lirc_igorplugusb[3]: Device buffer overrun.
[11186.489814] lirc_igorplugusb[3]: Device buffer overrun.
[11186.704816] lirc_igorplugusb[3]: Device buffer overrun.
[11186.812824] lirc_igorplugusb[3]: Device buffer overrun.
[11187.029820] lirc_igorplugusb[3]: Device buffer overrun.
[11187.137823] lirc_igorplugusb[3]: Device buffer overrun.
[11187.353836] lirc_igorplugusb[3]: Device buffer overrun.
[11187.484825] lirc_igorplugusb[3]: Device buffer overrun.
[11187.699828] lirc_igorplugusb[3]: Device buffer overrun.
[11188.232840] lirc_igorplugusb[3]: Device buffer overrun.
[11188.664845] lirc_igorplugusb[3]: Device buffer overrun.
[11188.810843] lirc_igorplugusb[3]: Device buffer overrun.
[11189.035845] lirc_igorplugusb[3]: Device buffer overrun.
[11189.136853] lirc_igorplugusb[3]: Device buffer overrun.
[11189.352854] lirc_igorplugusb[3]: Device buffer overrun.
[11189.504857] lirc_igorplugusb[3]: Device buffer overrun.
[11189.720856] lirc_igorplugusb[3]: Device buffer overrun.
[11189.827859] lirc_igorplugusb[3]: Device buffer overrun.
[11190.043856] lirc_igorplugusb[3]: Device buffer overrun.
[11190.152861] lirc_igorplugusb[3]: Device buffer overrun.
[11190.368874] lirc_igorplugusb[3]: Device buffer overrun.
[11190.475865] lirc_igorplugusb[3]: Device buffer overrun.
[11190.584866] lirc_igorplugusb[3]: Device buffer overrun.
[11190.989877] lirc_igorplugusb[3]: Device buffer overrun.
[11191.203872] lirc_igorplugusb[3]: Device buffer overrun.
[11191.304876] lirc_igorplugusb[3]: Device buffer overrun.
[11191.411875] lirc_igorplugusb[3]: Device buffer overrun.
[11191.520877] lirc_igorplugusb[3]: Device buffer overrun.
[11191.736883] lirc_igorplugusb[3]: Device buffer overrun.
[11191.843882] lirc_igorplugusb[3]: Device buffer overrun.
[11191.952884] lirc_igorplugusb[3]: Device buffer overrun.
[11192.059877] lirc_igorplugusb[3]: Device buffer overrun.
[11192.168900] lirc_igorplugusb[3]: Device buffer overrun.
[11192.276888] lirc_igorplugusb[3]: Device buffer overrun.
[11192.384890] lirc_igorplugusb[3]: Device buffer overrun.
[11192.491889] lirc_igorplugusb[3]: Device buffer overrun.
[11192.600889] lirc_igorplugusb[3]: Device buffer overrun.
[11192.709886] lirc_igorplugusb[3]: Device buffer overrun.
[11192.816902] lirc_igorplugusb[3]: Device buffer overrun.
[11192.924893] lirc_igorplugusb[3]: Device buffer overrun.
[11193.032898] lirc_igorplugusb[3]: Device buffer overrun.
[11453.133234] usb 2-1: USB disconnect, address 3
[11453.133404] lirc_igorplugusb[3]: usb remote disconnected
[14918.832041] usb 2-1: new low speed USB device using ohci_hcd and address 4
[14919.124394] lirc_igorplugusb 2-1:1.0: lirc_dev: driver lirc_igorplugusb  registered at minor = 0
[14919.160219] lirc_igorplugusb[4]: Ing. Igor Cesko, Copyright(c) 2003 IgorPlug-USB (AVR) on usb2:4
[14961.138751] lirc_igorplugusb[4]: Device buffer overrun.
[14961.363749] lirc_igorplugusb[4]: Device buffer overrun.
[14961.464754] lirc_igorplugusb[4]: Device buffer overrun.
[14961.678762] lirc_igorplugusb[4]: Device buffer overrun.
[14961.786754] lirc_igorplugusb[4]: Device buffer overrun.
[14961.894755] lirc_igorplugusb[4]: Device buffer overrun.
[14962.002758] lirc_igorplugusb[4]: Device buffer overrun.
[14962.112759] lirc_igorplugusb[4]: Device buffer overrun.
[14962.235774] lirc_igorplugusb[4]: Device buffer overrun.
[14962.342763] lirc_igorplugusb[4]: Device buffer overrun.
[14962.451763] lirc_igorplugusb[4]: Device buffer overrun.
[14962.675764] lirc_igorplugusb[4]: Device buffer overrun.
[14962.776768] lirc_igorplugusb[4]: Device buffer overrun.
[14962.891771] lirc_igorplugusb[4]: Device buffer overrun.
[14964.665800] lirc_igorplugusb[4]: Device buffer overrun.
[14964.881794] lirc_igorplugusb[4]: Device buffer overrun.
[14965.055795] lirc_igorplugusb[4]: Device buffer overrun.
[14965.153798] lirc_igorplugusb[4]: Device buffer overrun.
[14965.299806] lirc_igorplugusb[4]: Device buffer overrun.
[14965.408800] lirc_igorplugusb[4]: Device buffer overrun.
[14966.075813] lirc_igorplugusb[4]: Device buffer overrun.
[14966.289812] lirc_igorplugusb[4]: Device buffer overrun.
[14966.445825] lirc_igorplugusb[4]: Device buffer overrun.
[14966.553816] lirc_igorplugusb[4]: Device buffer overrun.
[14967.878835] lirc_igorplugusb[4]: Device buffer overrun.
[14968.093836] lirc_igorplugusb[4]: Device buffer overrun.
[14968.201833] lirc_igorplugusb[4]: Device buffer overrun.
[14968.309843] lirc_igorplugusb[4]: Device buffer overrun.
[14968.463840] lirc_igorplugusb[4]: Device buffer overrun.
[14968.688842] lirc_igorplugusb[4]: Device buffer overrun.
[14968.787840] lirc_igorplugusb[4]: Device buffer overrun.
[14968.895854] lirc_igorplugusb[4]: Device buffer overrun.
[14969.002848] lirc_igorplugusb[4]: Device buffer overrun.
[14969.111851] lirc_igorplugusb[4]: Device buffer overrun.
[14969.432868] lirc_igorplugusb[4]: Device buffer overrun.
[14969.648857] lirc_igorplugusb[4]: Device buffer overrun.
[14969.904857] lirc_igorplugusb[4]: Device buffer overrun.
[14970.011858] lirc_igorplugusb[4]: Device buffer overrun.
[14971.544882] lirc_igorplugusb[4]: Device buffer overrun.
[14971.652880] lirc_igorplugusb[4]: Device buffer overrun.
[14972.137889] lirc_igorplugusb[4]: Device buffer overrun.
[14972.246888] lirc_igorplugusb[4]: Device buffer overrun.
[14972.370889] lirc_igorplugusb[4]: Device buffer overrun.
[14972.478904] lirc_igorplugusb[4]: Device buffer overrun.
[14974.055915] lirc_igorplugusb[4]: Device buffer overrun.
[14974.279915] lirc_igorplugusb[4]: Device buffer overrun.
[14974.464916] lirc_igorplugusb[4]: Device buffer overrun.
[14974.573917] lirc_igorplugusb[4]: Device buffer overrun.
[14974.741919] lirc_igorplugusb[4]: Device buffer overrun.
[14974.956924] lirc_igorplugusb[4]: Device buffer overrun.
[14975.104929] lirc_igorplugusb[4]: Device buffer overrun.
[14975.211925] lirc_igorplugusb[4]: Device buffer overrun.
[14976.010945] lirc_igorplugusb[4]: Device buffer overrun.
[14976.226940] lirc_igorplugusb[4]: Device buffer overrun.
[14977.339954] lirc_igorplugusb[4]: Device buffer overrun.
[14977.555953] lirc_igorplugusb[4]: Device buffer overrun.
[14977.664957] lirc_igorplugusb[4]: Device buffer overrun.
[14977.881969] lirc_igorplugusb[4]: Device buffer overrun.
[15505.512663] lirc_igorplugusb[4]: Device buffer overrun.
[15505.728664] lirc_igorplugusb[4]: Device buffer overrun.
[15505.837677] lirc_igorplugusb[4]: Device buffer overrun.
[15506.053669] lirc_igorplugusb[4]: Device buffer overrun.
[15506.160668] lirc_igorplugusb[4]: Device buffer overrun.
[15506.269669] lirc_igorplugusb[4]: Device buffer overrun.
[15506.378670] lirc_igorplugusb[4]: Device buffer overrun.
[15506.592674] lirc_igorplugusb[4]: Device buffer overrun.
[15506.701672] lirc_igorplugusb[4]: Device buffer overrun.
[15506.917675] lirc_igorplugusb[4]: Device buffer overrun.
[15507.026686] lirc_igorplugusb[4]: Device buffer overrun.
[15507.240681] lirc_igorplugusb[4]: Device buffer overrun.
[15508.421699] lirc_igorplugusb[4]: Device buffer overrun.
[15508.637699] lirc_igorplugusb[4]: Device buffer overrun.
[15508.746697] lirc_igorplugusb[4]: Device buffer overrun.
[15508.853708] lirc_igorplugusb[4]: Device buffer overrun.
[15509.523715] lirc_igorplugusb[4]: Device buffer overrun.
[15509.736713] lirc_igorplugusb[4]: Device buffer overrun.
[15512.287748] lirc_igorplugusb[4]: Device buffer overrun.
[15512.503752] lirc_igorplugusb[4]: Device buffer overrun.
[15512.647749] lirc_igorplugusb[4]: Device buffer overrun.
[15512.863752] lirc_igorplugusb[4]: Device buffer overrun.
[15513.287759] lirc_igorplugusb[4]: Device buffer overrun.
[15513.394759] lirc_igorplugusb[4]: Device buffer overrun.
[15514.593778] lirc_igorplugusb[4]: Device buffer overrun.
[15514.810792] lirc_igorplugusb[4]: Device buffer overrun.
[15514.918777] lirc_igorplugusb[4]: Device buffer overrun.
[15515.134790] lirc_igorplugusb[4]: Device buffer overrun.
[15515.242782] lirc_igorplugusb[4]: Device buffer overrun.
[15515.351784] lirc_igorplugusb[4]: Device buffer overrun.
[15515.482792] lirc_igorplugusb[4]: Device buffer overrun.
[15515.698789] lirc_igorplugusb[4]: Device buffer overrun.
[15515.806790] lirc_igorplugusb[4]: Device buffer overrun.
[15516.021799] lirc_igorplugusb[4]: Device buffer overrun.
[15516.130792] lirc_igorplugusb[4]: Device buffer overrun.
[15516.345799] lirc_igorplugusb[4]: Device buffer overrun.
[15516.479799] lirc_igorplugusb[4]: Device buffer overrun.
[15516.694805] lirc_igorplugusb[4]: Device buffer overrun.
[16939.071868] lirc_igorplugusb[4]: Device buffer overrun.
[16939.296868] lirc_igorplugusb[4]: Device buffer overrun.
[16939.394870] lirc_igorplugusb[4]: Device buffer overrun.
[16939.504869] lirc_igorplugusb[4]: Device buffer overrun.
[16939.611869] lirc_igorplugusb[4]: Device buffer overrun.
[16939.721871] lirc_igorplugusb[4]: Device buffer overrun.
[16939.827881] lirc_igorplugusb[4]: Device buffer overrun.
[16940.258880] lirc_igorplugusb[4]: Device buffer overrun.
[16940.367881] lirc_igorplugusb[4]: Device buffer overrun.
[16940.581883] lirc_igorplugusb[4]: Device buffer overrun.
[16940.690881] lirc_igorplugusb[4]: Device buffer overrun.
[16940.799883] lirc_igorplugusb[4]: Device buffer overrun.
[16940.906881] lirc_igorplugusb[4]: Device buffer overrun.
[16941.122894] lirc_igorplugusb[4]: Device buffer overrun.
[16941.229893] lirc_igorplugusb[4]: Device buffer overrun.
[16941.338894] lirc_igorplugusb[4]: Device buffer overrun.
[16941.447896] lirc_igorplugusb[4]: Device buffer overrun.
[16941.553897] lirc_igorplugusb[4]: Device buffer overrun.
[16941.685900] lirc_igorplugusb[4]: Device buffer overrun.
[16941.794895] lirc_igorplugusb[4]: Device buffer overrun.
[16941.903898] lirc_igorplugusb[4]: Device buffer overrun.
[16942.010901] lirc_igorplugusb[4]: Device buffer overrun.
[16945.798969] usb 2-1: USB disconnect, address 4
[16945.799940] lirc_igorplugusb[4]: GET_INFRACODE: error -62
[16945.799987] lirc_igorplugusb[4]: usb remote disconnected
[16953.472038] usb 2-1: new low speed USB device using ohci_hcd and address 5
[16953.765761] lirc_igorplugusb 2-1:1.0: lirc_dev: driver lirc_igorplugusb  registered at minor = 0
[16953.802242] lirc_igorplugusb[5]: Ing. Igor Cesko, Copyright(c) 2003 IgorPlug-USB (AVR) on usb2:5
[16960.456138] lirc_igorplugusb[5]: Device buffer overrun.
[16960.672142] lirc_igorplugusb[5]: Device buffer overrun.
[16960.779140] lirc_igorplugusb[5]: Device buffer overrun.
[16960.888141] lirc_igorplugusb[5]: Device buffer overrun.
[16961.075145] lirc_igorplugusb[5]: Device buffer overrun.
[16961.291149] lirc_igorplugusb[5]: Device buffer overrun.
[16961.410148] lirc_igorplugusb[5]: Device buffer overrun.
[16961.518151] lirc_igorplugusb[5]: Device buffer overrun.
[16961.626151] lirc_igorplugusb[5]: Device buffer overrun.
[16962.003156] lirc_igorplugusb[5]: Device buffer overrun.
[16962.219158] lirc_igorplugusb[5]: Device buffer overrun.
[16962.319171] lirc_igorplugusb[5]: Device buffer overrun.
[16962.543162] lirc_igorplugusb[5]: Device buffer overrun.
[16962.643163] lirc_igorplugusb[5]: Device buffer overrun.
[16962.867164] lirc_igorplugusb[5]: Device buffer overrun.
[16963.065170] lirc_igorplugusb[5]: Device buffer overrun.
[16963.171168] lirc_igorplugusb[5]: Device buffer overrun.
[16964.475189] lirc_igorplugusb[5]: Device buffer overrun.
[16964.583186] lirc_igorplugusb[5]: Device buffer overrun.
[16965.106198] lirc_igorplugusb[5]: Device buffer overrun.
[16965.429199] lirc_igorplugusb[5]: Device buffer overrun.
[16966.424214] lirc_igorplugusb[5]: Device buffer overrun.
[16966.533225] lirc_igorplugusb[5]: Device buffer overrun.
[16966.641212] lirc_igorplugusb[5]: Device buffer overrun.
[16966.748213] lirc_igorplugusb[5]: Device buffer overrun.
[16967.482228] lirc_igorplugusb[5]: Device buffer overrun.
[16967.698230] lirc_igorplugusb[5]: Device buffer overrun.
[16968.245233] lirc_igorplugusb[5]: Device buffer overrun.
[16968.461241] lirc_igorplugusb[5]: Device buffer overrun.
[16968.695236] lirc_igorplugusb[5]: Device buffer overrun.
[16968.803237] lirc_igorplugusb[5]: Device buffer overrun.
[18021.631611] lirc_igorplugusb[5]: Device buffer overrun.
[18021.847616] lirc_igorplugusb[5]: Device buffer overrun.
[18021.971615] lirc_igorplugusb[5]: Device buffer overrun.
[18022.178622] lirc_igorplugusb[5]: Device buffer overrun.
[18022.538625] lirc_igorplugusb[5]: Device buffer overrun.
[18022.754629] lirc_igorplugusb[5]: Device buffer overrun.
[18022.862628] lirc_igorplugusb[5]: Device buffer overrun.
[18022.969630] lirc_igorplugusb[5]: Device buffer overrun.
[18023.684639] lirc_igorplugusb[5]: Device buffer overrun.
[18023.782640] lirc_igorplugusb[5]: Device buffer overrun.
[18024.532647] lirc_igorplugusb[5]: Device buffer overrun.
[18024.858659] lirc_igorplugusb[5]: Device buffer overrun.
[18024.967652] lirc_igorplugusb[5]: Device buffer overrun.
[18025.181658] lirc_igorplugusb[5]: Device buffer overrun.
[18025.793666] lirc_igorplugusb[5]: Device buffer overrun.
[18026.008673] lirc_igorplugusb[5]: Device buffer overrun.
[18026.530675] lirc_igorplugusb[5]: Device buffer overrun.
[18026.639708] lirc_igorplugusb[5]: Device buffer overrun.
[18026.884682] lirc_igorplugusb[5]: Device buffer overrun.
[18026.992678] lirc_igorplugusb[5]: Device buffer overrun.
[18027.354689] lirc_igorplugusb[5]: Device buffer overrun.
[18027.568689] lirc_igorplugusb[5]: Device buffer overrun.
[18027.812687] lirc_igorplugusb[5]: Device buffer overrun.
[18028.028688] lirc_igorplugusb[5]: Device buffer overrun.
[18028.836702] lirc_igorplugusb[5]: Device buffer overrun.
[18029.159708] lirc_igorplugusb[5]: Device buffer overrun.
[18029.441712] lirc_igorplugusb[5]: Device buffer overrun.
[18029.658720] lirc_igorplugusb[5]: Device buffer overrun.
[18029.816717] lirc_igorplugusb[5]: Device buffer overrun.
[18029.924717] lirc_igorplugusb[5]: Device buffer overrun.
[18030.085719] lirc_igorplugusb[5]: Device buffer overrun.
[18030.301729] lirc_igorplugusb[5]: Device buffer overrun.
[18030.409726] lirc_igorplugusb[5]: Device buffer overrun.
[18030.626726] lirc_igorplugusb[5]: Device buffer overrun.
[18750.386743] usb 2-1: USB disconnect, address 5
[18750.386914] lirc_igorplugusb[5]: usb remote disconnected
[18772.844027] usb 2-1: new low speed USB device using ohci_hcd and address 6
[18773.126638] lirc_igorplugusb 2-1:1.0: lirc_dev: driver lirc_igorplugusb  registered at minor = 0
[18773.162158] lirc_igorplugusb[6]: Ing. Igor Cesko, Copyright(c) 2003 IgorPlug-USB (AVR) on usb2:6
[20180.675525] usb 2-1: USB disconnect, address 6
[20180.675705] lirc_igorplugusb[6]: usb remote disconnected
captain-dj@captaindj-desktop:~$ 

und nun IR Empfänger angeschlossen :

[ 4486.078621] phy1: hwaddr 00:e0:4c:12:0c:69, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 4486.090764] rtl8187: Customer ID is 0xFF
[ 4486.090836] Registered led device: rtl8187-phy1::radio
[ 4486.090872] Registered led device: rtl8187-phy1::tx
[ 4486.090906] Registered led device: rtl8187-phy1::rx
[ 4486.094283] rtl8187: wireless switch is on
[ 4488.318000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4492.602309] wlan0: authenticate with 00:1c:4a:d3:38:e7 (try 1)
[ 4492.605619] wlan0: authenticated
[ 4492.661880] wlan0: associate with 00:1c:4a:d3:38:e7 (try 1)
[ 4492.860055] wlan0: associate with 00:1c:4a:d3:38:e7 (try 2)
[ 4492.864652] wlan0: RX AssocResp from 00:1c:4a:d3:38:e7 (capab=0x411 status=0 aid=1)
[ 4492.864659] wlan0: associated
[ 4492.927466] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4503.168028] wlan0: no IPv6 routers present
[ 5452.685725] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 5452.898325] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 5454.303030] wlan0: deauthenticating from 00:1c:4a:d3:38:e7 by local choice (reason=3)
[ 5454.357494] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 5454.357500] cfg80211: Restoring regulatory settings
[ 5454.357503] cfg80211: Calling CRDA to update world regulatory domain
[ 5454.390437] cfg80211: World regulatory domain updated:
[ 5454.390442]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5454.390446]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5454.390449]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5454.390452]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5454.390454]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5454.390457]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5455.115545] PM: Syncing filesystems ... done.
[ 5455.119496] PM: Preparing system for mem sleep
[ 5455.119502] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 5455.132052] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 5455.148038] PM: Entering mem sleep
[ 5455.148053] Suspending console(s) (use no_console_suspend to debug)
[ 5455.148789] sd 3:0:0:0: [sda] Synchronizing SCSI cache
[ 5455.161007] ACPI handle has no context!
[ 5455.161289] parport_pc 00:09: disabled
[ 5455.161499] serial 00:07: disabled
[ 5455.180766] forcedeth 0000:00:0a.0: PCI INT A disabled
[ 5455.180962] Intel ICH 0000:00:04.0: PCI INT A disabled
[ 5455.181072] ohci_hcd 0000:00:02.0: PCI INT A disabled
[ 5455.181095] sata_nv 0000:00:08.0: PCI INT A disabled
[ 5455.572454] PM: suspend of drv:nvidia dev:0000:05:00.0 complete after 410.498 msecs
[ 5455.572475] sd 3:0:0:0: [sda] Stopping disk
[ 5455.572560] PM: suspend of drv:pcieport dev:0000:00:0e.0 complete after 391.913 msecs
[ 5455.684023] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[ 5455.832022] PM: suspend of drv:usb dev:1-8 complete after 683.410 msecs
[ 5455.832043] PM: suspend of drv:usb dev:usb1 complete after 670.095 msecs
[ 5455.848032] ehci_hcd 0000:00:02.1: PCI INT B disabled
[ 5455.848036] PM: suspend of drv:ehci_hcd dev:0000:00:02.1 complete after 667.059 msecs
[ 5455.913686] PM: suspend of drv:sd dev:3:0:0:0 complete after 764.900 msecs
[ 5455.913694] PM: suspend of drv:scsi dev:target3:0:0 complete after 764.835 msecs
[ 5455.913702] PM: suspend of drv:scsi dev:host3 complete after 764.768 msecs
[ 5455.913744] sata_nv 0000:00:07.0: PCI INT A disabled
[ 5455.928023] PM: suspend of drv:sata_nv dev:0000:00:07.0 complete after 747.232 msecs
[ 5455.928031] PM: suspend of drv: dev:pci0000:00 complete after 747.037 msecs
[ 5455.928037] PM: suspend of devices complete after 779.841 msecs
[ 5455.928039] PM: suspend devices took 0.780 seconds
[ 5455.960213] PM: late suspend of devices complete after 32.169 msecs
[ 5455.960277] ACPI: Preparing to enter system sleep state S3
[ 5455.961192] PM: Saving platform NVS memory
[ 5455.961420] Disabling non-boot CPUs ...
[ 5455.961420] Back to C!
[ 5455.961420] PM: Restoring platform NVS memory
[ 5455.961420] ACPI: Waking up from system sleep state S3
[ 5455.961420] pci 0000:00:00.0: restoring config space at offset 0xf (was 0x0, writing 0xff)
[ 5455.961420] ohci_hcd 0000:00:02.0: restoring config space at offset 0x4 (was 0xfebff000, writing 0x80000000)
[ 5455.961420] ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
[ 5455.961420] ehci_hcd 0000:00:02.1: restoring config space at offset 0x4 (was 0xfeb00000, writing 0x80005000)
[ 5455.961420] ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[ 5455.961420] sata_nv 0000:00:07.0: restoring config space at offset 0x9 (was 0xfebfc000, writing 0x80002000)
[ 5455.961420] sata_nv 0000:00:07.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
[ 5455.961420] sata_nv 0000:00:08.0: restoring config space at offset 0x9 (was 0xfebfb000, writing 0x80003000)
[ 5455.961420] sata_nv 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
[ 5455.976031] forcedeth 0000:00:0a.0: BAR 0: set to [mem 0x80004000-0x80004fff] (PCI address [0x80004000-0x80004fff]
[ 5455.976035] forcedeth 0000:00:0a.0: BAR 1: set to [io  0xbc00-0xbc07] (PCI address [0xbc00-0xbc07]
[ 5455.976040] forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010105)
[ 5455.976048] forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb80007)
[ 5455.976068] pcieport 0000:00:0b.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 5455.976108] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 5455.976113] pcieport 0000:00:0b.0: Enabling HT MSI Mapping
[ 5455.976118] pcieport 0000:00:0b.0: Linking AER extended capability
[ 5455.976133] pcieport 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 5455.976175] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 5455.976180] pcieport 0000:00:0c.0: Enabling HT MSI Mapping
[ 5455.976184] pcieport 0000:00:0c.0: Linking AER extended capability
[ 5455.976199] pcieport 0000:00:0d.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 5455.976244] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 5455.976248] pcieport 0000:00:0d.0: Enabling HT MSI Mapping
[ 5455.976252] pcieport 0000:00:0d.0: Linking AER extended capability
[ 5455.976267] pcieport 0000:00:0e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 5455.976315] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 5455.976319] pcieport 0000:00:0e.0: Enabling HT MSI Mapping
[ 5455.976323] pcieport 0000:00:0e.0: Linking AER extended capability
[ 5455.976374] nvidia 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[ 5455.976382] nvidia 0000:05:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xfc000004)
[ 5455.976387] nvidia 0000:05:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c)
[ 5455.976390] nvidia 0000:05:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfb000000)
[ 5455.976395] nvidia 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 5455.976913] PM: early resume of devices complete after 13.451 msecs
[ 5455.977096] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 5455.977101] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 5455.977112] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 5455.977116] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 5455.977127] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 5455.977130] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 5455.977151] pata_amd 0000:00:06.0: setting latency timer to 64
[ 5455.977167] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 5455.977170] sata_nv 0000:00:07.0: setting latency timer to 64
[ 5455.977184] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 5455.977187] sata_nv 0000:00:08.0: setting latency timer to 64
[ 5455.977200] pci 0000:00:09.0: setting latency timer to 64
[ 5456.104553] sd 3:0:0:0: [sda] Starting disk
[ 5456.108121] PM: resume of drv:ohci_hcd dev:0000:00:02.0 complete after 131.028 msecs
[ 5456.108151] PM: resume of drv:ehci_hcd dev:0000:00:02.1 complete after 131.039 msecs
[ 5456.108221] PM: resume of drv:Intel ICH dev:0000:00:04.0 complete after 131.097 msecs
[ 5456.108228] PM: resume of drv: dev:platform complete after 131.154 msecs
[ 5456.109501] serial 00:07: activated
[ 5456.110445] parport_pc 00:09: activated
[ 5456.225444] PM: resume of drv:usb dev:usb1 complete after 120.983 msecs
[ 5456.225454] PM: resume of drv:hub dev:1-0:1.0 complete after 120.990 msecs
[ 5456.225465] PM: resume of drv: dev:ep_81 complete after 114.472 msecs
[ 5456.225768] PM: resume of drv:nvidia dev:0000:05:00.0 complete after 248.109 msecs
[ 5456.240031] PM: resume of drv:usb dev:usb2 complete after 135.562 msecs
[ 5456.240038] PM: resume of drv:hub dev:2-0:1.0 complete after 135.567 msecs
[ 5456.286278] ata1.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 5456.286282] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 5456.288195] PM: resume of drv:usb dev:1-8 complete after 183.616 msecs
[ 5456.288202] PM: resume of drv:usb dev:1-8:1.0 complete after 183.620 msecs
[ 5456.301035] PM: resume of drv:usb dev:2-9 complete after 196.517 msecs
[ 5456.301042] PM: resume of drv:usbhid dev:2-9:1.1 complete after 196.521 msecs
[ 5456.308247] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 5456.308250] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 5456.308276] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x1f)
[ 5456.308280] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x1f)
[ 5456.340197] ata1.00: configured for UDMA/33
[ 5456.356239] ata1.01: configured for UDMA/33
[ 5456.505743] PM: resume of drv:forcedeth dev:0000:00:0a.0 complete after 528.536 msecs
[ 5456.505755] PM: resume of drv:net dev:eth0 complete after 219.249 msecs
[ 5456.856019] ata5: SATA link down (SStatus 0 SControl 300)
[ 5456.856030] ata3: SATA link down (SStatus 0 SControl 300)
[ 5456.856040] ata6: SATA link down (SStatus 0 SControl 300)
[ 5456.964022] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5456.972105] ata4.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[ 5456.980204] ata4.00: configured for UDMA/133
[ 5456.984480] PM: resume of drv:sd dev:3:0:0:0 complete after 879.929 msecs
[ 5456.984487] PM: resume of drv:scsi_device dev:3:0:0:0 complete after 879.912 msecs
[ 5456.984560] PM: resume of drv:scsi_disk dev:3:0:0:0 complete after 478.765 msecs
[ 5456.984752] PM: resume of devices complete after 1007.807 msecs
[ 5457.134727] phy2: Selected rate control algorithm 'minstrel'
[ 5457.135205] phy2: hwaddr 00:e0:4c:12:0c:69, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 5457.146089] rtl8187: Customer ID is 0xFF
[ 5457.146113] Registered led device: rtl8187-phy2::radio
[ 5457.146130] Registered led device: rtl8187-phy2::tx
[ 5457.146146] Registered led device: rtl8187-phy2::rx
[ 5457.146577] rtl8187: wireless switch is on
[ 5457.146701] PM: resume devices took 1.168 seconds
[ 5457.146732] PM: Finishing wakeup.
[ 5457.146734] Restarting tasks ... done.
[ 5457.565078] eth0: no link during initialization.
[ 5457.566002] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5459.649505] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5460.455537] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 5460.633469] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 5463.853050] wlan0: authenticate with 00:1c:4a:d3:38:e7 (try 1)
[ 5463.855667] wlan0: authenticated
[ 5463.909048] wlan0: associate with 00:1c:4a:d3:38:e7 (try 1)
[ 5464.108048] wlan0: associate with 00:1c:4a:d3:38:e7 (try 2)
[ 5464.115690] wlan0: RX AssocResp from 00:1c:4a:d3:38:e7 (capab=0x411 status=0 aid=1)
[ 5464.115696] wlan0: associated
[ 5464.170891] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5474.376021] wlan0: no IPv6 routers present
[10219.980035] usb 2-1: new low speed USB device using ohci_hcd and address 3
[10220.290176] lirc_dev: IR Remote Control driver registered, major 250 
[10220.309909] lirc_igorplugusb: module is from the staging directory, the quality is unknown, you have been warned.
[10220.313534] 
[10220.313538] lirc_igorplugusb: USB remote driver for LIRC v0.1
[10220.313543] lirc_igorplugusb: Jan M. Hochstein <hochstein@algo.informatik.tu-darmstadt.de>
[10220.313787] lirc_igorplugusb 2-1:1.0: lirc_dev: driver lirc_igorplugusb  registered at minor = 0
[10220.348549] lirc_igorplugusb[3]: Ing. Igor Cesko, Copyright(c) 2003 IgorPlug-USB (AVR) on usb2:3
[10220.355887] usbcore: registered new interface driver lirc_igorplugusb
[11181.777758] lirc_igorplugusb[3]: Device buffer overrun.
[11181.993767] lirc_igorplugusb[3]: Device buffer overrun.
[11182.102761] lirc_igorplugusb[3]: Device buffer overrun.
[11182.318759] lirc_igorplugusb[3]: Device buffer overrun.
[11183.248777] lirc_igorplugusb[3]: Device buffer overrun.
[11183.355773] lirc_igorplugusb[3]: Device buffer overrun.
[11183.605776] lirc_igorplugusb[3]: Device buffer overrun.
[11183.712777] lirc_igorplugusb[3]: Device buffer overrun.
[11183.821784] lirc_igorplugusb[3]: Device buffer overrun.
[11184.037782] lirc_igorplugusb[3]: Device buffer overrun.
[11184.197786] lirc_igorplugusb[3]: Device buffer overrun.
[11184.305784] lirc_igorplugusb[3]: Device buffer overrun.
[11185.329800] lirc_igorplugusb[3]: Device buffer overrun.
[11185.544812] lirc_igorplugusb[3]: Device buffer overrun.
[11185.653803] lirc_igorplugusb[3]: Device buffer overrun.
[11185.760805] lirc_igorplugusb[3]: Device buffer overrun.
[11185.948815] lirc_igorplugusb[3]: Device buffer overrun.
[11186.163820] lirc_igorplugusb[3]: Device buffer overrun.
[11186.273812] lirc_igorplugusb[3]: Device buffer overrun.
[11186.381814] lirc_igorplugusb[3]: Device buffer overrun.
[11186.489814] lirc_igorplugusb[3]: Device buffer overrun.
[11186.704816] lirc_igorplugusb[3]: Device buffer overrun.
[11186.812824] lirc_igorplugusb[3]: Device buffer overrun.
[11187.029820] lirc_igorplugusb[3]: Device buffer overrun.
[11187.137823] lirc_igorplugusb[3]: Device buffer overrun.
[11187.353836] lirc_igorplugusb[3]: Device buffer overrun.
[11187.484825] lirc_igorplugusb[3]: Device buffer overrun.
[11187.699828] lirc_igorplugusb[3]: Device buffer overrun.
[11188.232840] lirc_igorplugusb[3]: Device buffer overrun.
[11188.664845] lirc_igorplugusb[3]: Device buffer overrun.
[11188.810843] lirc_igorplugusb[3]: Device buffer overrun.
[11189.035845] lirc_igorplugusb[3]: Device buffer overrun.
[11189.136853] lirc_igorplugusb[3]: Device buffer overrun.
[11189.352854] lirc_igorplugusb[3]: Device buffer overrun.
[11189.504857] lirc_igorplugusb[3]: Device buffer overrun.
[11189.720856] lirc_igorplugusb[3]: Device buffer overrun.
[11189.827859] lirc_igorplugusb[3]: Device buffer overrun.
[11190.043856] lirc_igorplugusb[3]: Device buffer overrun.
[11190.152861] lirc_igorplugusb[3]: Device buffer overrun.
[11190.368874] lirc_igorplugusb[3]: Device buffer overrun.
[11190.475865] lirc_igorplugusb[3]: Device buffer overrun.
[11190.584866] lirc_igorplugusb[3]: Device buffer overrun.
[11190.989877] lirc_igorplugusb[3]: Device buffer overrun.
[11191.203872] lirc_igorplugusb[3]: Device buffer overrun.
[11191.304876] lirc_igorplugusb[3]: Device buffer overrun.
[11191.411875] lirc_igorplugusb[3]: Device buffer overrun.
[11191.520877] lirc_igorplugusb[3]: Device buffer overrun.
[11191.736883] lirc_igorplugusb[3]: Device buffer overrun.
[11191.843882] lirc_igorplugusb[3]: Device buffer overrun.
[11191.952884] lirc_igorplugusb[3]: Device buffer overrun.
[11192.059877] lirc_igorplugusb[3]: Device buffer overrun.
[11192.168900] lirc_igorplugusb[3]: Device buffer overrun.
[11192.276888] lirc_igorplugusb[3]: Device buffer overrun.
[11192.384890] lirc_igorplugusb[3]: Device buffer overrun.
[11192.491889] lirc_igorplugusb[3]: Device buffer overrun.
[11192.600889] lirc_igorplugusb[3]: Device buffer overrun.
[11192.709886] lirc_igorplugusb[3]: Device buffer overrun.
[11192.816902] lirc_igorplugusb[3]: Device buffer overrun.
[11192.924893] lirc_igorplugusb[3]: Device buffer overrun.
[11193.032898] lirc_igorplugusb[3]: Device buffer overrun.
[11453.133234] usb 2-1: USB disconnect, address 3
[11453.133404] lirc_igorplugusb[3]: usb remote disconnected
[14918.832041] usb 2-1: new low speed USB device using ohci_hcd and address 4
[14919.124394] lirc_igorplugusb 2-1:1.0: lirc_dev: driver lirc_igorplugusb  registered at minor = 0
[14919.160219] lirc_igorplugusb[4]: Ing. Igor Cesko, Copyright(c) 2003 IgorPlug-USB (AVR) on usb2:4
[14961.138751] lirc_igorplugusb[4]: Device buffer overrun.
[14961.363749] lirc_igorplugusb[4]: Device buffer overrun.
[14961.464754] lirc_igorplugusb[4]: Device buffer overrun.
[14961.678762] lirc_igorplugusb[4]: Device buffer overrun.
[14961.786754] lirc_igorplugusb[4]: Device buffer overrun.
[14961.894755] lirc_igorplugusb[4]: Device buffer overrun.
[14962.002758] lirc_igorplugusb[4]: Device buffer overrun.
[14962.112759] lirc_igorplugusb[4]: Device buffer overrun.
[14962.235774] lirc_igorplugusb[4]: Device buffer overrun.
[14962.342763] lirc_igorplugusb[4]: Device buffer overrun.
[14962.451763] lirc_igorplugusb[4]: Device buffer overrun.
[14962.675764] lirc_igorplugusb[4]: Device buffer overrun.
[14962.776768] lirc_igorplugusb[4]: Device buffer overrun.
[14962.891771] lirc_igorplugusb[4]: Device buffer overrun.
[14964.665800] lirc_igorplugusb[4]: Device buffer overrun.
[14964.881794] lirc_igorplugusb[4]: Device buffer overrun.
[14965.055795] lirc_igorplugusb[4]: Device buffer overrun.
[14965.153798] lirc_igorplugusb[4]: Device buffer overrun.
[14965.299806] lirc_igorplugusb[4]: Device buffer overrun.
[14965.408800] lirc_igorplugusb[4]: Device buffer overrun.
[14966.075813] lirc_igorplugusb[4]: Device buffer overrun.
[14966.289812] lirc_igorplugusb[4]: Device buffer overrun.
[14966.445825] lirc_igorplugusb[4]: Device buffer overrun.
[14966.553816] lirc_igorplugusb[4]: Device buffer overrun.
[14967.878835] lirc_igorplugusb[4]: Device buffer overrun.
[14968.093836] lirc_igorplugusb[4]: Device buffer overrun.
[14968.201833] lirc_igorplugusb[4]: Device buffer overrun.
[14968.309843] lirc_igorplugusb[4]: Device buffer overrun.
[14968.463840] lirc_igorplugusb[4]: Device buffer overrun.
[14968.688842] lirc_igorplugusb[4]: Device buffer overrun.
[14968.787840] lirc_igorplugusb[4]: Device buffer overrun.
[14968.895854] lirc_igorplugusb[4]: Device buffer overrun.
[14969.002848] lirc_igorplugusb[4]: Device buffer overrun.
[14969.111851] lirc_igorplugusb[4]: Device buffer overrun.
[14969.432868] lirc_igorplugusb[4]: Device buffer overrun.
[14969.648857] lirc_igorplugusb[4]: Device buffer overrun.
[14969.904857] lirc_igorplugusb[4]: Device buffer overrun.
[14970.011858] lirc_igorplugusb[4]: Device buffer overrun.
[14971.544882] lirc_igorplugusb[4]: Device buffer overrun.
[14971.652880] lirc_igorplugusb[4]: Device buffer overrun.
[14972.137889] lirc_igorplugusb[4]: Device buffer overrun.
[14972.246888] lirc_igorplugusb[4]: Device buffer overrun.
[14972.370889] lirc_igorplugusb[4]: Device buffer overrun.
[14972.478904] lirc_igorplugusb[4]: Device buffer overrun.
[14974.055915] lirc_igorplugusb[4]: Device buffer overrun.
[14974.279915] lirc_igorplugusb[4]: Device buffer overrun.
[14974.464916] lirc_igorplugusb[4]: Device buffer overrun.
[14974.573917] lirc_igorplugusb[4]: Device buffer overrun.
[14974.741919] lirc_igorplugusb[4]: Device buffer overrun.
[14974.956924] lirc_igorplugusb[4]: Device buffer overrun.
[14975.104929] lirc_igorplugusb[4]: Device buffer overrun.
[14975.211925] lirc_igorplugusb[4]: Device buffer overrun.
[14976.010945] lirc_igorplugusb[4]: Device buffer overrun.
[14976.226940] lirc_igorplugusb[4]: Device buffer overrun.
[14977.339954] lirc_igorplugusb[4]: Device buffer overrun.
[14977.555953] lirc_igorplugusb[4]: Device buffer overrun.
[14977.664957] lirc_igorplugusb[4]: Device buffer overrun.
[14977.881969] lirc_igorplugusb[4]: Device buffer overrun.
[15505.512663] lirc_igorplugusb[4]: Device buffer overrun.
[15505.728664] lirc_igorplugusb[4]: Device buffer overrun.
[15505.837677] lirc_igorplugusb[4]: Device buffer overrun.
[15506.053669] lirc_igorplugusb[4]: Device buffer overrun.
[15506.160668] lirc_igorplugusb[4]: Device buffer overrun.
[15506.269669] lirc_igorplugusb[4]: Device buffer overrun.
[15506.378670] lirc_igorplugusb[4]: Device buffer overrun.
[15506.592674] lirc_igorplugusb[4]: Device buffer overrun.
[15506.701672] lirc_igorplugusb[4]: Device buffer overrun.
[15506.917675] lirc_igorplugusb[4]: Device buffer overrun.
[15507.026686] lirc_igorplugusb[4]: Device buffer overrun.
[15507.240681] lirc_igorplugusb[4]: Device buffer overrun.
[15508.421699] lirc_igorplugusb[4]: Device buffer overrun.
[15508.637699] lirc_igorplugusb[4]: Device buffer overrun.
[15508.746697] lirc_igorplugusb[4]: Device buffer overrun.
[15508.853708] lirc_igorplugusb[4]: Device buffer overrun.
[15509.523715] lirc_igorplugusb[4]: Device buffer overrun.
[15509.736713] lirc_igorplugusb[4]: Device buffer overrun.
[15512.287748] lirc_igorplugusb[4]: Device buffer overrun.
[15512.503752] lirc_igorplugusb[4]: Device buffer overrun.
[15512.647749] lirc_igorplugusb[4]: Device buffer overrun.
[15512.863752] lirc_igorplugusb[4]: Device buffer overrun.
[15513.287759] lirc_igorplugusb[4]: Device buffer overrun.
[15513.394759] lirc_igorplugusb[4]: Device buffer overrun.
[15514.593778] lirc_igorplugusb[4]: Device buffer overrun.
[15514.810792] lirc_igorplugusb[4]: Device buffer overrun.
[15514.918777] lirc_igorplugusb[4]: Device buffer overrun.
[15515.134790] lirc_igorplugusb[4]: Device buffer overrun.
[15515.242782] lirc_igorplugusb[4]: Device buffer overrun.
[15515.351784] lirc_igorplugusb[4]: Device buffer overrun.
[15515.482792] lirc_igorplugusb[4]: Device buffer overrun.
[15515.698789] lirc_igorplugusb[4]: Device buffer overrun.
[15515.806790] lirc_igorplugusb[4]: Device buffer overrun.
[15516.021799] lirc_igorplugusb[4]: Device buffer overrun.
[15516.130792] lirc_igorplugusb[4]: Device buffer overrun.
[15516.345799] lirc_igorplugusb[4]: Device buffer overrun.
[15516.479799] lirc_igorplugusb[4]: Device buffer overrun.
[15516.694805] lirc_igorplugusb[4]: Device buffer overrun.
[16939.071868] lirc_igorplugusb[4]: Device buffer overrun.
[16939.296868] lirc_igorplugusb[4]: Device buffer overrun.
[16939.394870] lirc_igorplugusb[4]: Device buffer overrun.
[16939.504869] lirc_igorplugusb[4]: Device buffer overrun.
[16939.611869] lirc_igorplugusb[4]: Device buffer overrun.
[16939.721871] lirc_igorplugusb[4]: Device buffer overrun.
[16939.827881] lirc_igorplugusb[4]: Device buffer overrun.
[16940.258880] lirc_igorplugusb[4]: Device buffer overrun.
[16940.367881] lirc_igorplugusb[4]: Device buffer overrun.
[16940.581883] lirc_igorplugusb[4]: Device buffer overrun.
[16940.690881] lirc_igorplugusb[4]: Device buffer overrun.
[16940.799883] lirc_igorplugusb[4]: Device buffer overrun.
[16940.906881] lirc_igorplugusb[4]: Device buffer overrun.
[16941.122894] lirc_igorplugusb[4]: Device buffer overrun.
[16941.229893] lirc_igorplugusb[4]: Device buffer overrun.
[16941.338894] lirc_igorplugusb[4]: Device buffer overrun.
[16941.447896] lirc_igorplugusb[4]: Device buffer overrun.
[16941.553897] lirc_igorplugusb[4]: Device buffer overrun.
[16941.685900] lirc_igorplugusb[4]: Device buffer overrun.
[16941.794895] lirc_igorplugusb[4]: Device buffer overrun.
[16941.903898] lirc_igorplugusb[4]: Device buffer overrun.
[16942.010901] lirc_igorplugusb[4]: Device buffer overrun.
[16945.798969] usb 2-1: USB disconnect, address 4
[16945.799940] lirc_igorplugusb[4]: GET_INFRACODE: error -62
[16945.799987] lirc_igorplugusb[4]: usb remote disconnected
[16953.472038] usb 2-1: new low speed USB device using ohci_hcd and address 5
[16953.765761] lirc_igorplugusb 2-1:1.0: lirc_dev: driver lirc_igorplugusb  registered at minor = 0
[16953.802242] lirc_igorplugusb[5]: Ing. Igor Cesko, Copyright(c) 2003 IgorPlug-USB (AVR) on usb2:5
[16960.456138] lirc_igorplugusb[5]: Device buffer overrun.
[16960.672142] lirc_igorplugusb[5]: Device buffer overrun.
[16960.779140] lirc_igorplugusb[5]: Device buffer overrun.
[16960.888141] lirc_igorplugusb[5]: Device buffer overrun.
[16961.075145] lirc_igorplugusb[5]: Device buffer overrun.
[16961.291149] lirc_igorplugusb[5]: Device buffer overrun.
[16961.410148] lirc_igorplugusb[5]: Device buffer overrun.
[16961.518151] lirc_igorplugusb[5]: Device buffer overrun.
[16961.626151] lirc_igorplugusb[5]: Device buffer overrun.
[16962.003156] lirc_igorplugusb[5]: Device buffer overrun.
[16962.219158] lirc_igorplugusb[5]: Device buffer overrun.
[16962.319171] lirc_igorplugusb[5]: Device buffer overrun.
[16962.543162] lirc_igorplugusb[5]: Device buffer overrun.
[16962.643163] lirc_igorplugusb[5]: Device buffer overrun.
[16962.867164] lirc_igorplugusb[5]: Device buffer overrun.
[16963.065170] lirc_igorplugusb[5]: Device buffer overrun.
[16963.171168] lirc_igorplugusb[5]: Device buffer overrun.
[16964.475189] lirc_igorplugusb[5]: Device buffer overrun.
[16964.583186] lirc_igorplugusb[5]: Device buffer overrun.
[16965.106198] lirc_igorplugusb[5]: Device buffer overrun.
[16965.429199] lirc_igorplugusb[5]: Device buffer overrun.
[16966.424214] lirc_igorplugusb[5]: Device buffer overrun.
[16966.533225] lirc_igorplugusb[5]: Device buffer overrun.
[16966.641212] lirc_igorplugusb[5]: Device buffer overrun.
[16966.748213] lirc_igorplugusb[5]: Device buffer overrun.
[16967.482228] lirc_igorplugusb[5]: Device buffer overrun.
[16967.698230] lirc_igorplugusb[5]: Device buffer overrun.
[16968.245233] lirc_igorplugusb[5]: Device buffer overrun.
[16968.461241] lirc_igorplugusb[5]: Device buffer overrun.
[16968.695236] lirc_igorplugusb[5]: Device buffer overrun.
[16968.803237] lirc_igorplugusb[5]: Device buffer overrun.
[18021.631611] lirc_igorplugusb[5]: Device buffer overrun.
[18021.847616] lirc_igorplugusb[5]: Device buffer overrun.
[18021.971615] lirc_igorplugusb[5]: Device buffer overrun.
[18022.178622] lirc_igorplugusb[5]: Device buffer overrun.
[18022.538625] lirc_igorplugusb[5]: Device buffer overrun.
[18022.754629] lirc_igorplugusb[5]: Device buffer overrun.
[18022.862628] lirc_igorplugusb[5]: Device buffer overrun.
[18022.969630] lirc_igorplugusb[5]: Device buffer overrun.
[18023.684639] lirc_igorplugusb[5]: Device buffer overrun.
[18023.782640] lirc_igorplugusb[5]: Device buffer overrun.
[18024.532647] lirc_igorplugusb[5]: Device buffer overrun.
[18024.858659] lirc_igorplugusb[5]: Device buffer overrun.
[18024.967652] lirc_igorplugusb[5]: Device buffer overrun.
[18025.181658] lirc_igorplugusb[5]: Device buffer overrun.
[18025.793666] lirc_igorplugusb[5]: Device buffer overrun.
[18026.008673] lirc_igorplugusb[5]: Device buffer overrun.
[18026.530675] lirc_igorplugusb[5]: Device buffer overrun.
[18026.639708] lirc_igorplugusb[5]: Device buffer overrun.
[18026.884682] lirc_igorplugusb[5]: Device buffer overrun.
[18026.992678] lirc_igorplugusb[5]: Device buffer overrun.
[18027.354689] lirc_igorplugusb[5]: Device buffer overrun.
[18027.568689] lirc_igorplugusb[5]: Device buffer overrun.
[18027.812687] lirc_igorplugusb[5]: Device buffer overrun.
[18028.028688] lirc_igorplugusb[5]: Device buffer overrun.
[18028.836702] lirc_igorplugusb[5]: Device buffer overrun.
[18029.159708] lirc_igorplugusb[5]: Device buffer overrun.
[18029.441712] lirc_igorplugusb[5]: Device buffer overrun.
[18029.658720] lirc_igorplugusb[5]: Device buffer overrun.
[18029.816717] lirc_igorplugusb[5]: Device buffer overrun.
[18029.924717] lirc_igorplugusb[5]: Device buffer overrun.
[18030.085719] lirc_igorplugusb[5]: Device buffer overrun.
[18030.301729] lirc_igorplugusb[5]: Device buffer overrun.
[18030.409726] lirc_igorplugusb[5]: Device buffer overrun.
[18030.626726] lirc_igorplugusb[5]: Device buffer overrun.
[18750.386743] usb 2-1: USB disconnect, address 5
[18750.386914] lirc_igorplugusb[5]: usb remote disconnected
[18772.844027] usb 2-1: new low speed USB device using ohci_hcd and address 6
[18773.126638] lirc_igorplugusb 2-1:1.0: lirc_dev: driver lirc_igorplugusb  registered at minor = 0
[18773.162158] lirc_igorplugusb[6]: Ing. Igor Cesko, Copyright(c) 2003 IgorPlug-USB (AVR) on usb2:6
[20180.675525] usb 2-1: USB disconnect, address 6
[20180.675705] lirc_igorplugusb[6]: usb remote disconnected
[20369.264041] usb 2-1: new low speed USB device using ohci_hcd and address 7
[20369.554026] lirc_igorplugusb 2-1:1.0: lirc_dev: driver lirc_igorplugusb  registered at minor = 0
[20369.589434] lirc_igorplugusb[7]: Ing. Igor Cesko, Copyright(c) 2003 IgorPlug-USB (AVR) on usb2:7
captain-dj@captaindj-desktop:~$ 

Das ganze "buffer overrun" ist doch sicher nicht normal, oder ? Ich bräuchte dringend hilfe bei der Sache. Wenn ich diesen Empfänger nämlich nicht ans laufen bekomme, werde ich diesen zurück senden und mit eine X10 Fernbedienung mit Empfänger kaufen. Diese soll ja recht gut sein.

Hallo,

ich habe nach diesem Posting noch ein bißchen auf der LIRC Mailingliste gemailt... dabei kam raus, dass das Igor USB Device tatsächlich einen limitierten Speicher hat: http://sourceforge.net/mailarchive/message.php?msg_id=27146304
Das wird auch hier bestätigt: https://bugs.launchpad.net/ubuntu/+source/lirc/+bug/364699

Das X10 Teil wurde IMHO schon hinreichend oft mit LIRC verwendet und scheint gut zu gehen. Kommt halt darauf an ob Du vielleicht auch bestehende Infrarot-Fernbedienungen verwenden möchtest. Falls dem so ist, wären auch alle MCE USB Geräte eine Option (siehe Link).

Das einzige was mich stutzig macht, ist dass der Bufferoverflow bereits ohne angeschlossenes Gerät auftaucht. 🙄
Wenn Du am Igor USB Teil noch weiter "forschen" möchtest, dann würde ich Dir auch eine Anfrage auf der LIRC-Liste empfehlen.

Ciao Timo

Hallo error empire !

Nun ja, ich habe diesen Beitrag hier gesehen und habe sozusagen auf deine "Empfehlung" hin dieses Teil gekauft, bzw. ich habe erwartet das es direkt funktioniert, ohne große Einarbeitung. Die X10 wäre so gesehen kein Problem, kostet genau so viel wie dieser Empfänger hier und das mit Fernbedienung ! Muss ich den hier wohl wieder zurück senden.

Die Mailingliste werde ich mir aber noch ansehen.

Ich habe schon öfter irw oder

mode2 -d /dev/lirc0

ausprobiert, aber leider ohne Erfolg.Irgend was mit "permission denied" stand da immer. Nun habe ich :

sudo mode2 -d /dev/lirc0

eingegeben und siehe da, es empfängt Daten !!! irw Zeigt allerdings nichts an.

Werde das jetzt mal weiter testen !

Captain-DJ schrieb:

Nun ja, ich habe diesen Beitrag hier gesehen und habe sozusagen auf deine "Empfehlung" hin dieses Teil gekauft, bzw. ich habe erwartet das es direkt funktioniert, ohne große Einarbeitung.

Das tut mir wirklich leid. 🙄 Ich habe hier der Artikelbeschreibung "vertraut" und es wird ja auch als IgorUSB Device erkannt, nur die Probleme die mit diesem Device einher gehen waren mir zu dem damaligen Zeitpunkt leider unbekannt.

Ciao Timo

PS: Die X10 gibt es sehr günstig bei Pollin.de

Also ich kann mit irrecord Tasten lernen und eine lircd.conf schreiben lassen. Der Empfänger funktioniert also !

Aber wie gehts nun weiter ? Ich möchte damit MythTV bedienen. Muss ich nun jede Taste die ich benutzen will anlernen ? Ich habe es mal mit audacious versucht, einfach mal zwei Knöpfe auf der Fernbedienung mit "b" und "x" belegt für vor und zurück im Musikplayer, aber es tut sich nichts. Und wie das ganze dann unter MythTV eingerichtet werden muss weiß ich erst recht nicht ! In dem "Mythbuntu Kontrollzentrum" kann man zwar eine Fernbedienung auswählen, aber ich habe eine Universal, die gibts natürlich da nicht.

Ich kann Dir da leider nun auch nicht mehr weiterhelfen, da ich ja den praktischen Einsatz eines USB Infrarot Empfängers bisher nur aus der "Theorie" kenne. Denn nach meinem IrDA-Fehlkauf habe ich bisher noch kein neues Device gekauft. Für Deine Frage würde ich IMHO eher einen eigenen Thread aufmachen (evtl. eher auf der LIRC/MythTV-Mailingliste), da es sich ja hier um ein ganz grundsätzliches (Verständnis-)Problem handelt (IrDA-Device ist kein LIRC-Device).

Ok, mir reicht es jetzt. Mit einer ganz normalen SAT Fernbedienung habe ich eine lircd.conf schreiben können, mit der Universal, die ich dann auch benutzen wollte, kommt irgend ein Mist raus, "somthing wrong" ... super !

Ich schicke das Teil zurück und kaufe mir eine X10 und hoffe das es damit dann direkt funktioniert. Wenn nicht, dann geh ich wieder zurück zu meinem schönen Windows und zu GIRDER, mit dem es zwar auch nicht leicht ist etwas zu steuern, aber da hat man wenigstens eine Anleitung ! Meine Konfiguration war so gewesen, das GIRDER kontrolliert welche Anwendung im Vordergrund ist und so konnte ich mit einer Taste verschiedene Anwendungen steuern.

Wie das hier mit LIRC funktionieren soll ist mir schleierhaft. Es gibt verschiedene Programme wir Rhythmbox usw. die ein LIRC Plugin haben...ja und weiter ? Ich sitze jetzt seit 2 Tagen hier und außer unfertige Anleitungen hab ich hier nichts gefunden. Ob ich zuerst Tasten zuweisen muss wie KEY_UP weiß ich nicht, ob man dann noch was anderes machen muss weiß ich auch nicht und was diese "Plugins" sollen, wenn man da nichts einstellen kann weiß ich erst recht nicht...und eigentlich wollte ich "nur" MythTV damit bedienen.

Das einzige was mich hier wirklich begeistert hat, war die Tatsache, das meine billig DVB-S Box "Opera" direkt unterstützt wird...aber was bringt das, wenn alles andere immer wieder ausartet.

XP mit GBPVR:

+ Fernbedienung kein Problem
+ Standby kein Problem
+ aufwachen aus Standby kein Problem 
- Aufnehmen wegen fehlender Unterstützung etwas schwierig (selbstgemachtes Programm benutzt)

Ubuntu mit MythTV:

- Fernbedienung...ein Graus
- Standby...geht nicht
- aufwachen, falls Standby zufällig funktioniert...geht nicht 
+ Aufnehmen gut, da direkt unterstützt.

Hm....schwierige Entscheidung ??? ...habe fertig ☹ (Sorry, bin grad etwas genervt)

Hi!

Ich hab das selbe Problem mit dem besagten (Atmel Corp./Igor) Infrarot-Empfänger von ebay: lsusb findet den Infrarot-Empfänger, cat /proc/bus/input/devices jedoch nicht. Nach vielem hin und her habe ich folgendes gefunden: http://openelec.tv/forum/103-infared-remotes/26587-igorplug-usb-receiver-does-not-work-with-lirc#27692 und hab einfach mal

1
2
3

modprobe lirc_igorplugusb
sudo killall lircd
sudo /usr/sbin/lircd --driver=default --device=/dev/lirc0 --uinput --output=/var/run/lirc/lircd --pidfile=/var/run/lirc/lircd.pid /storage/.config/lircd.conf

eingegeben und jetzt erscheint lirc auch unter cat /proc/bus/input/devices:

1
2
3
4
5
6
7
8
9

Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="lircd"
P: Phys=
S: Sysfs=/devices/virtual/input/input11
U: Uniq=
H: Handlers=sysrq rfkill kbd event6 
B: PROP=0
B: EV=100003
B: KEY=1ffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe

Ob und in wieweit das weiterhilft, weiß ich noch nicht, aber ich werd in den nächsten Tagen mal weiterforschen...

PS: Es ist wirklich merkwürdig, dass mode2 -d /dev/lirc0 was empfängt, jedoch kein input-device gefunden wird...

Sooooo, ich habe zweischenzeitlich lirc runtergeworfen, dann lirc-0.9.0 mit "./configure --with-driver=igorplugusb" selbst kompiliert, keinen Erfolg gehabt, aber dann diese Anleitung gefunden: http://www.ocinside.de/go_d.html?http://www.ocinside.de/html/modding/linux_ir_lirc_anleitung_d.html und einfach lirc wieder aus den Paketquellen wieder installiert, da ich nicht wusste, wie ich das selbstkompilierte lirc wieder lösche. Daher weiß ich nicht, ob die Anleitung auch ohne selbstkompiliertes lirc funktioniert (werde das wohl demnächst mal auf meinem Laptop prüfen). Jedenfalls spuckt irw jetzt was aus. Meine hardware.conf sieht so aus:

# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Igor Cesko's USB IR Receiver"
REMOTE_MODULES="lirc_dev lirc_igorplugusb"
REMOTE_DRIVER=""
REMOTE_DEVICE="/dev/lirc0"
REMOTE_SOCKET=""
REMOTE_LIRCD_CONF=""
REMOTE_LIRCD_ARGS=""

#Chosen IR Transmitter
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_SOCKET=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""

#Enable lircd
START_LIRCD="true"

#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"

#Try to load appropriate kernel modules
LOAD_MODULES="true"

# Default configuration files for your hardware if any
LIRCMD_CONF=""

#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""

Im mom ist das Ganze noch etwas träge und die Tasten werden auch zwei bis vier mal ausgegeben (auch bei einem kurzen Tastendruck), aber ich bin immerhin schon ein ganzes Stück weiter gekommen. Ich werde weiter berichten 😉