ubuntuusers.de

Moinmoin aus Bremen,

und Gruesse ans Forum!

Ich habe leider etwas massiv vergurkt, VERGURKT, und der Aufhaenger ist, dass Maus und Tastatur nicht mehr wollen bei der regulaeren Anmeldung in mein System (ich melde mich jetzt im Moment via Live CD).

Gestern habe ich drei Stunden lang herumgewerkelt an den Einstellungen fuer meine Grafikkarte, die keine Aufloesung auf 2560x1440 anbieten wollte bei meinem Bildschirm. Vermutlich ist da dann etwas schiefgegangen bei der Arbeit (oder beim Gepfusche) im Terminal, doch ich weiss nicht, wo oder was es gewesen sein kann.

Nun komme ich nicht mehr in die regulaere Xubuntu Darstellung, und es ist furchbar, da dort so viele Sachen schon eingestellt sind und eingerichtet.

Tatsaechlich gehen Maus und Tastatur via Live CD ohne Probleme.

Habt Ihr eine Idee, was ich tun kann, um

a) sie wieder fuer Xubuntu zu aktivieren? Ich habe Deja Dup und so als Systemsicherung, und auch ein Systemabbild gemacht, aber das will alles nicht gehen, oder ich mache es falsch. (Muaeh!)

b) Kann ich Euch etwas schicken, damit Ihr den Fehler findet in meiner Xubuntu Einrichtung? Ich weiss nur nicht, was genau Ihr da braucht, und was ich im Terminal eingeben soll zur Info.

Alles doof ....

Danke fuer Eure Hilfe und Ideen!

Tiger-Oli

Tiger-Oli schrieb:

Gestern habe ich drei Stunden lang herumgewerkelt an den Einstellungen fuer meine Grafikkarte, die keine Aufloesung auf 2560x1440 anbieten wollte bei meinem Bildschirm. Vermutlich ist da dann etwas schiefgegangen bei der Arbeit (oder beim Gepfusche) im Terminal, doch ich weiss nicht, wo oder was es gewesen sein kann.

An welchen Dateien hast du denn herumgespielt (die ~/.bash_history bzw. /root/.bash_history könnte da Hinweise geben)? Gibt es eine /etc/X11/xorg.conf? Falls ja würde ich die mal zur Seite schieben.

Hallo Seahawk,

vielen Dank fuer Deine Antwort, und die Ideen. Ich haenge ja gerade in der Live CD, und kann auf Verlaufsdaten glaube ich nicht zugreifen, von meiner Sitzung gestern abend (?). Es gibt die Etc X11 Datei, aber danach ist kein xorg mehr aufgefuehrt.

Alles uebel, fuerchte ich.

Wenn Du mir sagen koenntest, was ich genau ins Terminal hacken soll, mache ich das gerne.

Gruesse aus (Werder) Bremen

Tiger-Oli

Tiger-Oli schrieb:

Ich haenge ja gerade in der Live CD, und kann auf Verlaufsdaten glaube ich nicht zugreifen, von meiner Sitzung gestern abend (?).

Wieso nicht? Du musst eigentlich nur von der Live-CD aus die Partitionen deiner Installation einbinden (das sollte auch über den Dateimanager klappen, wenn die nicht verschlüsselt sind) und dann in die entsprechenden Dateien gucken.

Das ist schon einmal gut zu wissen - dass die Daten noch vorhanden sind, eigentlich.

Ich habe nun neu installiert, parallel, um nicht alles von Live-CD machen zu müssen. Leider kenne ich mich nicht so aus, wie man ja merkt - könntest Du mir einen Befehl schicken für das Terminal, mit denen ich die Daten einlesen kann? (und vorher die Festplattenpartition mounte ...)

Danke, Seahawk

Tiger-Oli

Mit dem Mounten bekomme ich leider nicht hin, tut mir leid. Die Anweisungen sind zwar alle da bei den wikis, aber ... uff, da steige ich nicht durch. Ich fürchte, ich muss den ganzen Laden wieder neu zusammenbauen.... die letzten Wochen umsonst, mit Treibern, Programmen, Wine, Konfigurieren, alles weg und futsch ... ich breche echt zusammen. Shit.

Tiger-Oli

Nur keine Panik, solange du dein home nicht löschst ist gar nichts futsch.

Uefi/Bios -> Plymouth -> LightDM (Anmeldung) -> Desktop (XFCE)

Wie weit startet dein PC denn überhaupt noch?

https://wiki.ubuntuusers.de/Notfall/

https://wiki.ubuntuusers.de/Recovery-Modus/

Ein grundlegender Tip ist z.B. System und home auf getrennte Partitionen zu legen. Bei etwas chaotischer Veranlagung kann man dann immer frisch installieren ohne Panik. 😀

Hi Hakel,

danke für die beruhigenden Worte ...! Es wäre super, wenn man es, etwas oder alles retten und wiederherstellen kann. Ich mochte meine Xubuntu-Version (und die Daten darauf ...), nun bin ich wieder auf dem Unity Desktop der 16er-Version von Ubuntu. Geht auch, aber Xubuntu gefiel mir besser.

Ich habe heute alles nochmal auf neuer Partition installiert und gehe mit frischem Ubuntu 16 ins Rennen! Die alte Partition (mit xubuntu) kann ich laden, aber mich dort nicht anmelden, weil dort weder Tastatur noch Maus funktionieren. Ich vermute, es ist noch alles da(hinter), doch wir können nicht miteinander kommunizieren.

Weißt Du einen Weg, um auf die sda1 Partition zu kommen, so "hintenrum", ohne die offizielle Anmeldemaske? Kann ich die Anmeldedaten auch anders eingeben, damit einloggen, und dann ... das System reparieren? (Danke für die Notfall-Links!)

Was meinst Du genau mit dem Weg Uefi/Bios – Plymouth (?) - LightDM ? - Desktop (XFCE)

Komme ich damit rein? Aber was ist Plymouth? Ich gucke es mal nach ...

Moin aus Bremen, und bedankt!

Tiger Oli

Moin nochmal, Hakel,

Plymouth, das klingt interessant. Ich überlege nur - wenn ich es auf dem "neuen System" (von heute) installiere oder im Terminal ändere, dann ist es ja aber noch nicht auf der alten Partition mit Xubuntu?

Auf der neuen Partition ist home auch so gut wie leer. Kannst du mir sagen, wie ich auf die persönlichen Daten der sda1 partition kommen kann? Das wäre dann sozusagen home. Aber wie komme ich da rein?

Danke für den freundlichen Support!

Tiger-Oli

GuMo Forum!

Nur als Update - ich habe via Root versucht, in meine alte Partition zu kommen (Daten sind noch da, es ist jedenfalls voller GB), doch trotz langen Versuchens habe ich nicht reinkommen können. Ich hatte zwar Zugriff auf meine alte Partition per root, doch war ich nicht pfiffig genug, die alte Distribution (?) mit Xubuntu so zu öffnen, dass der alte Nutzerbildschirm geöffnet wird. Auch die Dateien habe ich nicht gefunden.

Den Recovery Vorgang habe ich durchgespielt für die Xubuntu-Version, aber das Problem ist geblieben. Die Maus und die Tastatur reagieren nicht, und ich kann mich nicht anmelden.

Bei ähnlichen Problemen mit Ubuntu fand ich den Hinweis, die Änderungen der letzten drei Tage mal zu untersuchen.

https://wiki.ubuntuusers.de/Archiv/apt/Problembehebung/#Verlaufslisten

Hier ist die Ausgabe davon - vielleicht ist das ja in irgendeiner Weise aufschlussreich? (mir sagt das ja alles nichts, in Bezug auf mögliche Fehler ... ich weiß nur, dass ich einige Treiber neu installiert habe, um den externen Bildschirm in höherer Auflösung darstellen zu können)

~$ find /var/lib/dpkg/info -name \*.list -mtime -3 | sed 's#.list$##;s#.*/##' | sort 


apparmor
bash
bcmwl-kernel-source
bind9-host
chromium-codecs-ffmpeg-extra
distro-info-data
dkms
dnsutils
eject
firefox
firefox-locale-de
firefox-locale-en
flashplugin-installer
fonts-opensymbol
freepats
ghostscript
ghostscript-x
gir1.2-gst-plugins-base-1.0
gir1.2-javascriptcoregtk-4.0:amd64
gir1.2-webkit2-4.0:amd64
gstreamer1.0-alsa:amd64
gstreamer1.0-fluendo-mp3:amd64
gstreamer1.0-libav:amd64
gstreamer1.0-plugins-bad:amd64
gstreamer1.0-plugins-bad-faad:amd64
gstreamer1.0-plugins-bad-videoparsers:amd64
gstreamer1.0-plugins-base:amd64
gstreamer1.0-plugins-base-apps
gstreamer1.0-plugins-good:amd64
gstreamer1.0-plugins-ugly:amd64
gstreamer1.0-plugins-ugly-amr:amd64
gstreamer1.0-pulseaudio:amd64
gstreamer1.0-x:amd64
i965-va-driver:amd64
imagemagick
imagemagick-6.q16
imagemagick-common
liba52-0.7.4:amd64
libaacs0:amd64
libapparmor1:amd64
libapparmor-perl
libarchive13:amd64
libass5:amd64
libavcodec-ffmpeg56:amd64
libavfilter-ffmpeg5:amd64
libavformat-ffmpeg56:amd64
libavresample-ffmpeg2:amd64
libavutil-ffmpeg54:amd64
libbdplus0:amd64
libbind9-140:amd64
libbluray1:amd64
libbs2b0:amd64
libc6:amd64
libc6-dbg:amd64
libc6-dev:amd64
libc-bin
libc-dev-bin
libchromaprint0:amd64
libcrystalhd3:amd64
libdc1394-22:amd64
libdca0:amd64
libde265-0:amd64
libdns162:amd64
libdns-export162
libdvdnav4:amd64
libdvdread4:amd64
libevent-2.0-5:amd64
libfaad2:amd64
libflite1:amd64
libfluidsynth1:amd64
libfreetype6:amd64
libgcrypt20:amd64
libgd3:amd64
libgme0:amd64
libgnutls30:amd64
libgnutls-openssl27:amd64
libgs9:amd64
libgs9-common
libgsm1:amd64
libgstreamer-plugins-bad1.0-0:amd64
libgstreamer-plugins-base1.0-0:amd64
libgstreamer-plugins-good1.0-0:amd64
libgtkglext1:amd64
libicu55:amd64
libisc160:amd64
libisccc140:amd64
libisccfg140:amd64
libisc-export160
libjasper1:amd64
libjavascriptcoregtk-4.0-18:amd64
libjbig2dec0
libkate1:amd64
libldap-2.4-2:amd64
liblightdm-gobject-1-0:amd64
liblwres141:amd64
libmad0:amd64
libmagickcore-6.q16-2:amd64
libmagickcore-6.q16-2-extra:amd64
libmagickwand-6.q16-2:amd64
libmimic0:amd64
libminiupnpc10:amd64
libmjpegutils-2.1-0
libmms0:amd64
libmodplug1:amd64
libmp3lame0:amd64
libmpeg2-4:amd64
libmpeg2encpp-2.1-0
libmpg123-0:amd64
libmplex2-2.1-0
libmwaw-0.3-3:amd64
libnl-3-200:amd64
libnl-genl-3-200:amd64
libnm0:amd64
libnma0:amd64
libnma-common
libnm-glib4:amd64
libnm-glib-vpn1:amd64
libnm-gtk0:amd64
libnm-gtk-common
libnm-util2:amd64
libnspr4:amd64
libnss3:amd64
libnss3-nssdb
libofa0:amd64
libopenal1:amd64
libopenal-data
libopencore-amrnb0:amd64
libopencore-amrwb0:amd64
libopencv-calib3d2.4v5:amd64
libopencv-contrib2.4v5:amd64
libopencv-core2.4v5:amd64
libopencv-features2d2.4v5:amd64
libopencv-flann2.4v5:amd64
libopencv-highgui2.4v5:amd64
libopencv-imgproc2.4v5:amd64
libopencv-legacy2.4v5:amd64
libopencv-ml2.4v5:amd64
libopencv-objdetect2.4v5:amd64
libopencv-video2.4v5:amd64
libopenjpeg5:amd64
liboxideqtcore0:amd64
liboxideqt-qmlplugin:amd64
liboxideqtquick0:amd64
libpostproc-ffmpeg53:amd64
libreoffice-avmedia-backend-gstreamer
libreoffice-base-core
libreoffice-calc
libreoffice-common
libreoffice-core
libreoffice-draw
libreoffice-gnome
libreoffice-gtk
libreoffice-impress
libreoffice-math
libreoffice-ogltrans
libreoffice-pdfimport
libreoffice-style-breeze
libreoffice-style-galaxy
libreoffice-writer
librtmp1:amd64
libschroedinger-1.0-0:amd64
libshine3:amd64
libsidplay1v5
libsmbclient:amd64
libsnappy1v5:amd64
libsndfile1:amd64
libsodium18:amd64
libsoundtouch1:amd64
libsoxr0:amd64
libspandsp2:amd64
libsrtp0
libssh-gcrypt-4:amd64
libswresample-ffmpeg1:amd64
libswscale-ffmpeg3:amd64
libtasn1-6:amd64
libtbb2:amd64
libtiff5:amd64
libtwolame0:amd64
libva1:amd64
libvdpau1:amd64
libvo-aacenc0:amd64
libvo-amrwbenc0:amd64
libwbclient0:amd64
libwebkit2gtk-4.0-37:amd64
libwebkit2gtk-4.0-37-gtk2:amd64
libwildmidi1:amd64
libwildmidi-config
libx264-148:amd64
libx265-79:amd64
libxml2:amd64
libxslt1.1:amd64
libxvidcore4:amd64
libzbar0:amd64
libzmq5:amd64
libzvbi0:amd64
libzvbi-common
lightdm
lintian
linux-generic-hwe-16.04
linux-headers-4.8.0-58
linux-headers-4.8.0-58-generic
linux-headers-generic-hwe-16.04
linux-image-4.8.0-58-generic
linux-image-extra-4.8.0-58-generic
linux-image-generic-hwe-16.04
linux-libc-dev:amd64
locales
login
mesa-vdpau-drivers:amd64
multiarch-support
network-manager
network-manager-gnome
oxideqt-codecs-extra:amd64
passwd
python3-pil:amd64
python3-uno
samba-libs:amd64
sudo
tcpdump
thunderbird
thunderbird-gnome-support
thunderbird-locale-de
thunderbird-locale-en
thunderbird-locale-en-us
ubuntu-restricted-addons
uno-libs3
ure
va-driver-all:amd64
vdpau-driver-all:amd64
vdpau-va-driver:amd64

Wenn Ihr noch mal gucken mögt - vielen Dank! Es kann aber sein, dass dieses File nur die Sachen anzeigt, die auf meiner neuen Ubuntu-Installation passiert sind seit gestern morgen. Die alte (Xubuntu) kann ich ja nicht öffnen, und vielleicht würden da ganz andere Sachen angegeben werden? Puh, schwierig alles.

Moinmoin, und Danke

Tiger-Oli

Und .... hier ist noch was Internationales:

https://askubuntu.com/questions/837003/ubuntu-16-04-freezes-on-login-screen-no-keyboard-or-mouse-working

Du brauchst kein "root". Wenn du den gleichen user und Paßwort verwendest, kannst du deine wichtigen Daten, wie Thunderbird oder Firefox Profile, einfach in dein neues Profil kopieren.

Viele Wege führen nach Rom. Es ist etwas schwierig, so etwas aus der Ferne zu erklären. Der Link "Notfall hilft da noch am Besten.

Uefi/Bios -> Plymouth -> LightDM (Anmeldung) -> Desktop (XFCE)

Das beschreibt grob den Bootvorgang. Wenn z.B. "nur" der Desktop XFCE nicht startet oder abstürzt, kannst du in deinem home die Konfigdateien löschen. Dann sind deine persönlichen Einstellungen zwar weg, aber das System legt neue funktionierende an, und der Desktop startet wieder.

Man kann den Desktop in einer virteullen Konsole (Strg+Alt+F1) über startx starten, dann erhält man Fehlermeldungen.

Solche Operationen kannst du über die Recovery Konsole oder eine virtuelle Konsole machen. Je nachdem wie schwer dein System beschädigt wurde. Wenn gar nichts mehr geht, über Live System.

Ich habe das ungute Gefühl, daß bei dir gar kein großes Problem vorliegt, aber es fehlen die Infos.

Versuche methodisch den Link "Notfall" anzuwenden.

Füher konnte man diesen Befehl nutzen. Könnte aber inzwischen überholt sein!

sudo dpkg-reconfigure xserver-xorg

Hallo Rakel,

das ist sehr nett von Dir, vielen Dank für Deine Hilfe.

Ich hoffe/ ich fürchte, es ist wirklich nicht so etwas Wildes, aber als kleines Licht finde ich den nicht den richtigen Knopf, um alles wieder zum Laufen zu bekommen. Ich laufe aber mal durch den Notfall Link noch etwas genauer durch, mal gucken. Zäh!

Hier ist ein Ausdruck von Xorg.0.log, den ich im Logdateien-Link fand

https://wiki.ubuntuusers.de/Logdateien/

Bei der Verlaufsdaten zeigt er mir nur seit gestern an (neues Ubuntu-System aufgesetzt), aber bei den Änderungen ein bisschen mehr. Meine Graphikkarte ist eine Radeon, und es wurde viel daran rumgeändert, wie es scheint (das war ich ..). Ich hänge es mal an, aber ich fürchte auch, es hilft nicht viel bei der Analyse (?)

[    35.818] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    35.818] X Protocol Version 11, Revision 0
[    35.818] Build Operating System: Linux 4.4.0-59-generic x86_64 Ubuntu
[    35.818] Current Operating System: Linux delfin-R252B 4.8.0-58-generic #63~16.04.1-Ubuntu SMP Mon Jun 26 18:08:51 UTC 2017 x86_64
[    35.818] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-58-generic root=UUID=d756eeb8-7181-4343-8b18-cd7dd7b9901b ro quiet splash vt.handoff=7
[    35.818] Build Date: 26 January 2017  12:26:18AM
[    35.818] xorg-server 2:1.18.4-1ubuntu6.1~16.04.1 (For technical support please see http://www.ubuntu.com/support) 
[    35.818] Current version of pixman: 0.33.6
[    35.819] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    35.819] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    35.819] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul  5 10:35:20 2017
[    35.849] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    35.850] (==) No Layout section.  Using the first Screen section.
[    35.850] (==) No screen section available. Using defaults.
[    35.850] (**) |-->Screen "Default Screen Section" (0)
[    35.850] (**) |   |-->Monitor "<default monitor>"
[    35.851] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    35.852] (==) Automatically adding devices
[    35.852] (==) Automatically enabling devices
[    35.852] (==) Automatically adding GPU devices
[    35.852] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    35.852] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    35.852] 	Entry deleted from font path.
[    35.852] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    35.852] 	Entry deleted from font path.
[    35.852] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    35.852] 	Entry deleted from font path.
[    35.852] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    35.852] 	Entry deleted from font path.
[    35.852] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    35.852] 	Entry deleted from font path.
[    35.852] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    35.852] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    35.852] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    35.853] (II) Loader magic: 0x564b49285dc0
[    35.853] (II) Module ABI versions:
[    35.853] 	X.Org ANSI C Emulation: 0.4
[    35.853] 	X.Org Video Driver: 20.0
[    35.853] 	X.Org XInput driver : 22.1
[    35.853] 	X.Org Server Extension : 9.0
[    35.855] (++) using VT number 7

[    35.855] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    35.857] (II) xfree86: Adding drm device (/dev/dri/card0)
[    35.863] (--) PCI:*(0:0:1:0) 1002:9806:1043:103b rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[    35.863] (II) LoadModule: "glx"
[    35.902] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    36.034] (II) Module glx: vendor="X.Org Foundation"
[    36.034] 	compiled for 1.18.4, module version = 1.0.0
[    36.034] 	ABI class: X.Org Server Extension, version 9.0
[    36.034] (==) AIGLX enabled
[    36.034] (==) Matched ati as autoconfigured driver 0
[    36.034] (==) Matched ati as autoconfigured driver 1
[    36.034] (==) Matched modesetting as autoconfigured driver 2
[    36.034] (==) Matched fbdev as autoconfigured driver 3
[    36.034] (==) Matched vesa as autoconfigured driver 4
[    36.034] (==) Assigned the driver to the xf86ConfigLayout
[    36.034] (II) LoadModule: "ati"
[    36.035] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    36.035] (II) Module ati: vendor="X.Org Foundation"
[    36.035] 	compiled for 1.18.4, module version = 7.7.1
[    36.035] 	Module class: X.Org Video Driver
[    36.035] 	ABI class: X.Org Video Driver, version 20.0
[    36.035] (II) LoadModule: "radeon"
[    36.036] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    36.069] (II) Module radeon: vendor="X.Org Foundation"
[    36.069] 	compiled for 1.18.4, module version = 7.7.1
[    36.069] 	Module class: X.Org Video Driver
[    36.070] 	ABI class: X.Org Video Driver, version 20.0
[    36.070] (II) LoadModule: "modesetting"
[    36.070] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    36.070] (II) Module modesetting: vendor="X.Org Foundation"
[    36.071] 	compiled for 1.18.4, module version = 1.18.4
[    36.071] 	Module class: X.Org Video Driver
[    36.071] 	ABI class: X.Org Video Driver, version 20.0
[    36.071] (II) LoadModule: "fbdev"
[    36.071] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    36.071] (II) Module fbdev: vendor="X.Org Foundation"
[    36.071] 	compiled for 1.18.4, module version = 0.4.4
[    36.071] 	Module class: X.Org Video Driver
[    36.071] 	ABI class: X.Org Video Driver, version 20.0
[    36.071] (II) LoadModule: "vesa"
[    36.072] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    36.072] (II) Module vesa: vendor="X.Org Foundation"
[    36.072] 	compiled for 1.18.4, module version = 2.3.4
[    36.072] 	Module class: X.Org Video Driver
[    36.072] 	ABI class: X.Org Video Driver, version 20.0
[    36.072] (II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
	ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
	ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
	ATI Mobility Radeon HD 4670, ATI FirePro M5750,
	ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
	ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
	ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
	ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
	ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
	ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
	ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
	SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
	ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
	AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
	ATI Mobility Radeon Graphics, CEDAR,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
	ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
	CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
	BARTS, BARTS, Mobility Radeon HD 6000 Series,
	Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
	AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
	OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
	OLAND, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE,
	BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
	BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
	MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
	MULLINS, MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI,
	KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
	KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
	KAVERI, KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
	HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[    36.095] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    36.095] (II) FBDEV: driver for framebuffer: fbdev
[    36.095] (II) VESA: driver for VESA chipsets: vesa
[    36.100] (II) [KMS] Kernel modesetting enabled.
[    36.100] (WW) Falling back to old probe method for modesetting
[    36.100] (WW) Falling back to old probe method for fbdev
[    36.100] (II) Loading sub module "fbdevhw"
[    36.100] (II) LoadModule: "fbdevhw"
[    36.101] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    36.101] (II) Module fbdevhw: vendor="X.Org Foundation"
[    36.101] 	compiled for 1.18.4, module version = 0.0.2
[    36.101] 	ABI class: X.Org Video Driver, version 20.0
[    36.102] (WW) Falling back to old probe method for vesa
[    36.102] (II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    36.102] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    36.102] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    36.102] (==) RADEON(0): Default visual is TrueColor
[    36.102] (==) RADEON(0): RGB weight 888
[    36.102] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    36.102] (--) RADEON(0): Chipset: "AMD Radeon HD 6300 Series Graphics" (ChipID = 0x9806)
[    36.102] (II) Loading sub module "fb"
[    36.102] (II) LoadModule: "fb"
[    36.103] (II) Loading /usr/lib/xorg/modules/libfb.so
[    36.107] (II) Module fb: vendor="X.Org Foundation"
[    36.107] 	compiled for 1.18.4, module version = 1.0.0
[    36.107] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    36.107] (II) Loading sub module "dri2"
[    36.107] (II) LoadModule: "dri2"
[    36.107] (II) Module "dri2" already built-in
[    36.107] (II) Loading sub module "exa"
[    36.107] (II) LoadModule: "exa"
[    36.107] (II) Loading /usr/lib/xorg/modules/libexa.so
[    36.108] (II) Module exa: vendor="X.Org Foundation"
[    36.108] 	compiled for 1.18.4, module version = 2.6.0
[    36.108] 	ABI class: X.Org Video Driver, version 20.0
[    36.108] (II) RADEON(0): KMS Color Tiling: enabled
[    36.108] (II) RADEON(0): KMS Color Tiling 2D: enabled
[    36.108] (II) RADEON(0): KMS Pageflipping: enabled
[    36.108] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    36.108] (II) RADEON(0): Output LVDS has no monitor section
[    36.110] (II) RADEON(0): Output HDMI-0 has no monitor section
[    36.124] (II) RADEON(0): Output VGA-0 has no monitor section
[    36.125] (II) RADEON(0): EDID for output LVDS
[    36.125] (II) RADEON(0): Manufacturer: IVO  Model: 489  Serial#: 0
[    36.125] (II) RADEON(0): Year: 2010  Week: 21
[    36.125] (II) RADEON(0): EDID Version: 1.3
[    36.125] (II) RADEON(0): Digital Display Input
[    36.125] (II) RADEON(0): Max Image Size [cm]: horiz.: 26  vert.: 14
[    36.125] (II) RADEON(0): Gamma: 2.20
[    36.125] (II) RADEON(0): No DPMS capabilities specified
[    36.125] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    36.125] (II) RADEON(0): First detailed timing is preferred mode
[    36.125] (II) RADEON(0): redX: 0.566 redY: 0.337   greenX: 0.324 greenY: 0.572
[    36.125] (II) RADEON(0): blueX: 0.156 blueY: 0.120   whiteX: 0.312 whiteY: 0.328
[    36.125] (II) RADEON(0): Manufacturer's mask: 0
[    36.125] (II) RADEON(0): Supported detailed timing:
[    36.125] (II) RADEON(0): clock: 76.8 MHz   Image Size:  256 x 144 mm
[    36.125] (II) RADEON(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1560 h_border: 0
[    36.125] (II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 783 v_blanking: 821 v_border: 0
[    36.125] (II) RADEON(0): Ranges: V min: 55 V max: 65 Hz, H min: 43 H max: 49 kHz, PixClock max 85 MHz
[    36.125] (II) RADEON(0): Monitor name: M116NWR1 R0
[    36.125] (II) RADEON(0): EDID (in hex):
[    36.125] (II) RADEON(0): 	00ffffffffffff0026cf890400000000
[    36.125] (II) RADEON(0): 	15140103801a0e780a12309156539228
[    36.126] (II) RADEON(0): 	1e505400000001010101010101010101
[    36.126] (II) RADEON(0): 	010101010101051e56c2500035303020
[    36.126] (II) RADEON(0): 	3c000090100000190000000000000000
[    36.126] (II) RADEON(0): 	00000000000000000000000000fd0037
[    36.126] (II) RADEON(0): 	412b3108000a202020202020000000fc
[    36.126] (II) RADEON(0): 	004d3131364e575231205230200a0078
[    36.126] (II) RADEON(0): Printing probed modes for output LVDS
[    36.126] (II) RADEON(0): Modeline "1366x768"x60.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)
[    36.126] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[    36.126] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[    36.126] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    36.126] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    36.126] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[    36.126] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[    36.126] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    36.129] (II) RADEON(0): EDID for output HDMI-0
[    36.144] (II) RADEON(0): EDID for output VGA-0
[    36.144] (II) RADEON(0): Output LVDS connected
[    36.144] (II) RADEON(0): Output HDMI-0 disconnected
[    36.144] (II) RADEON(0): Output VGA-0 disconnected
[    36.144] (II) RADEON(0): Using exact sizes for initial modes
[    36.144] (II) RADEON(0): Output LVDS using initial mode 1366x768 +0+0
[    36.144] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    36.145] (II) RADEON(0): mem size init: gart size :3fdde000 vram size: s:18000000 visible:1787a000
[    36.145] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    36.145] (==) RADEON(0): DPI set to (96, 96)
[    36.145] (II) Loading sub module "ramdac"
[    36.145] (II) LoadModule: "ramdac"
[    36.145] (II) Module "ramdac" already built-in
[    36.145] (II) UnloadModule: "modesetting"
[    36.145] (II) Unloading modesetting
[    36.145] (II) UnloadModule: "fbdev"
[    36.145] (II) Unloading fbdev
[    36.145] (II) UnloadSubModule: "fbdevhw"
[    36.145] (II) Unloading fbdevhw
[    36.145] (II) UnloadModule: "vesa"
[    36.145] (II) Unloading vesa
[    36.145] (--) Depth 24 pixmap format is 32 bpp
[    36.146] (II) RADEON(0): [DRI2] Setup complete
[    36.147] (II) RADEON(0): [DRI2]   DRI driver: r600
[    36.147] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[    36.156] (II) RADEON(0): Front buffer size: 4128K
[    36.156] (II) RADEON(0): VRAM usage limit set to 343216K
[    36.173] (==) RADEON(0): DRI3 disabled
[    36.173] (==) RADEON(0): Backing store enabled
[    36.173] (II) RADEON(0): Direct rendering enabled
[    36.173] (II) EXA(0): Driver allocated offscreen pixmaps
[    36.173] (II) EXA(0): Driver registered support for the following operations:
[    36.173] (II)         Solid
[    36.173] (II)         Copy
[    36.173] (II)         Composite (RENDER acceleration)
[    36.173] (II)         UploadToScreen
[    36.173] (II)         DownloadFromScreen
[    36.174] (II) RADEON(0): Acceleration enabled
[    36.174] (==) RADEON(0): DPMS enabled
[    36.174] (==) RADEON(0): Silken mouse enabled
[    36.175] (II) RADEON(0): Set up textured video
[    36.175] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    36.175] (II) RADEON(0): [XvMC] Extension initialized.
[    36.175] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    36.270] (--) RandR disabled
[    36.292] (II) SELinux: Disabled on system
[    37.176] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    37.176] (II) AIGLX: enabled GLX_ARB_create_context
[    37.176] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    37.176] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    37.176] (II) AIGLX: enabled GLX_INTEL_swap_event
[    37.176] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    37.176] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    37.176] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    37.176] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    37.176] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    37.176] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    37.179] (II) AIGLX: Loaded and initialized r600
[    37.179] (II) GLX: Initialized DRI2 GL provider for screen 0
[    37.181] (II) RADEON(0): Setting screen physical size to 361 x 203
[    37.383] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    37.384] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    37.384] (II) LoadModule: "evdev"
[    37.385] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    37.403] (II) Module evdev: vendor="X.Org Foundation"
[    37.403] 	compiled for 1.18.4, module version = 2.10.2
[    37.403] 	Module class: X.Org XInput Driver
[    37.403] 	ABI class: X.Org XInput driver, version 22.1
[    37.403] (II) Using input driver 'evdev' for 'Power Button'
[    37.403] (**) Power Button: always reports core events
[    37.403] (**) evdev: Power Button: Device: "/dev/input/event2"
[    37.404] (--) evdev: Power Button: Vendor 0 Product 0x1
[    37.404] (--) evdev: Power Button: Found keys
[    37.404] (II) evdev: Power Button: Configuring as keyboard
[    37.404] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    37.404] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    37.404] (**) Option "xkb_rules" "evdev"
[    37.404] (**) Option "xkb_model" "pc105"
[    37.404] (**) Option "xkb_layout" "de"
[    37.471] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    37.471] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    37.471] (II) Using input driver 'evdev' for 'Video Bus'
[    37.471] (**) Video Bus: always reports core events
[    37.471] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    37.472] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    37.472] (--) evdev: Video Bus: Found keys
[    37.472] (II) evdev: Video Bus: Configuring as keyboard
[    37.472] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event4"
[    37.472] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    37.472] (**) Option "xkb_rules" "evdev"
[    37.472] (**) Option "xkb_model" "pc105"
[    37.472] (**) Option "xkb_layout" "de"
[    37.474] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    37.474] (II) No input driver specified, ignoring this device.
[    37.474] (II) This device may have been added with another device file.
[    37.475] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    37.475] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    37.475] (II) Using input driver 'evdev' for 'Sleep Button'
[    37.475] (**) Sleep Button: always reports core events
[    37.475] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    37.475] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    37.475] (--) evdev: Sleep Button: Found keys
[    37.475] (II) evdev: Sleep Button: Configuring as keyboard
[    37.475] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    37.475] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    37.475] (**) Option "xkb_rules" "evdev"
[    37.475] (**) Option "xkb_model" "pc105"
[    37.475] (**) Option "xkb_layout" "de"
[    37.478] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9)
[    37.478] (II) No input driver specified, ignoring this device.
[    37.478] (II) This device may have been added with another device file.
[    37.479] (II) config/udev: Adding input device USB 2.0 UVC VGA WebCam (/dev/input/event12)
[    37.479] (**) USB 2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
[    37.479] (II) Using input driver 'evdev' for 'USB 2.0 UVC VGA WebCam'
[    37.479] (**) USB 2.0 UVC VGA WebCam: always reports core events
[    37.479] (**) evdev: USB 2.0 UVC VGA WebCam: Device: "/dev/input/event12"
[    37.480] (--) evdev: USB 2.0 UVC VGA WebCam: Vendor 0x13d3 Product 0x5716
[    37.480] (--) evdev: USB 2.0 UVC VGA WebCam: Found keys
[    37.480] (II) evdev: USB 2.0 UVC VGA WebCam: Configuring as keyboard
[    37.480] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input19/event12"
[    37.480] (II) XINPUT: Adding extended input device "USB 2.0 UVC VGA WebCam" (type: KEYBOARD, id 9)
[    37.480] (**) Option "xkb_rules" "evdev"
[    37.480] (**) Option "xkb_model" "pc105"
[    37.480] (**) Option "xkb_layout" "de"
[    37.482] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event10)
[    37.482] (II) No input driver specified, ignoring this device.
[    37.482] (II) This device may have been added with another device file.
[    37.483] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event11)
[    37.483] (II) No input driver specified, ignoring this device.
[    37.483] (II) This device may have been added with another device file.
[    37.484] (II) config/udev: Adding input device RAPOO RAPOO 5G Wireless Device (/dev/input/event5)
[    37.485] (**) RAPOO RAPOO 5G Wireless Device: Applying InputClass "evdev keyboard catchall"
[    37.485] (II) Using input driver 'evdev' for 'RAPOO RAPOO 5G Wireless Device'
[    37.485] (**) RAPOO RAPOO 5G Wireless Device: always reports core events
[    37.485] (**) evdev: RAPOO RAPOO 5G Wireless Device: Device: "/dev/input/event5"
[    37.485] (--) evdev: RAPOO RAPOO 5G Wireless Device: Vendor 0x24ae Product 0x2003
[    37.485] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found keys
[    37.485] (II) evdev: RAPOO RAPOO 5G Wireless Device: Configuring as keyboard
[    37.485] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.2/0000:05:00.0/usb8/8-1/8-1:1.0/0003:24AE:2003.0001/input/input11/event5"
[    37.485] (II) XINPUT: Adding extended input device "RAPOO RAPOO 5G Wireless Device" (type: KEYBOARD, id 10)
[    37.485] (**) Option "xkb_rules" "evdev"
[    37.485] (**) Option "xkb_model" "pc105"
[    37.485] (**) Option "xkb_layout" "de"
[    37.488] (II) config/udev: Adding input device RAPOO RAPOO 5G Wireless Device (/dev/input/event6)
[    37.488] (**) RAPOO RAPOO 5G Wireless Device: Applying InputClass "evdev pointer catchall"
[    37.488] (**) RAPOO RAPOO 5G Wireless Device: Applying InputClass "evdev keyboard catchall"
[    37.488] (II) Using input driver 'evdev' for 'RAPOO RAPOO 5G Wireless Device'
[    37.488] (**) RAPOO RAPOO 5G Wireless Device: always reports core events
[    37.488] (**) evdev: RAPOO RAPOO 5G Wireless Device: Device: "/dev/input/event6"
[    37.488] (--) evdev: RAPOO RAPOO 5G Wireless Device: Vendor 0x24ae Product 0x2003
[    37.488] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found 9 mouse buttons
[    37.488] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found scroll wheel(s)
[    37.488] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found relative axes
[    37.488] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found x and y relative axes
[    37.488] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found absolute axes
[    37.488] (II) evdev: RAPOO RAPOO 5G Wireless Device: Forcing absolute x/y axes to exist.
[    37.488] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found keys
[    37.488] (II) evdev: RAPOO RAPOO 5G Wireless Device: Configuring as mouse
[    37.488] (II) evdev: RAPOO RAPOO 5G Wireless Device: Configuring as keyboard
[    37.488] (II) evdev: RAPOO RAPOO 5G Wireless Device: Adding scrollwheel support
[    37.489] (**) evdev: RAPOO RAPOO 5G Wireless Device: YAxisMapping: buttons 4 and 5
[    37.489] (**) evdev: RAPOO RAPOO 5G Wireless Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    37.489] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.2/0000:05:00.0/usb8/8-1/8-1:1.1/0003:24AE:2003.0002/input/input12/event6"
[    37.489] (II) XINPUT: Adding extended input device "RAPOO RAPOO 5G Wireless Device" (type: KEYBOARD, id 11)
[    37.489] (**) Option "xkb_rules" "evdev"
[    37.489] (**) Option "xkb_model" "pc105"
[    37.489] (**) Option "xkb_layout" "de"
[    37.490] (II) evdev: RAPOO RAPOO 5G Wireless Device: initialized for relative axes.
[    37.490] (WW) evdev: RAPOO RAPOO 5G Wireless Device: ignoring absolute axes.
[    37.490] (**) RAPOO RAPOO 5G Wireless Device: (accel) keeping acceleration scheme 1
[    37.490] (**) RAPOO RAPOO 5G Wireless Device: (accel) acceleration profile 0
[    37.490] (**) RAPOO RAPOO 5G Wireless Device: (accel) acceleration factor: 2.000
[    37.490] (**) RAPOO RAPOO 5G Wireless Device: (accel) acceleration threshold: 4
[    37.492] (II) config/udev: Adding input device RAPOO RAPOO 5G Wireless Device (/dev/input/mouse0)
[    37.492] (II) No input driver specified, ignoring this device.
[    37.492] (II) This device may have been added with another device file.
[    37.494] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event7)
[    37.494] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    37.494] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[    37.494] (**) PixArt USB Optical Mouse: always reports core events
[    37.494] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event7"
[    37.494] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
[    37.494] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[    37.494] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[    37.494] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[    37.494] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[    37.494] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[    37.494] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[    37.494] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    37.494] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    37.494] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.2/0000:05:00.0/usb8/8-2/8-2:1.0/0003:093A:2510.0003/input/input13/event7"
[    37.494] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 12)
[    37.495] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[    37.495] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[    37.495] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[    37.495] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[    37.495] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[    37.497] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse1)
[    37.497] (II) No input driver specified, ignoring this device.
[    37.497] (II) This device may have been added with another device file.
[    37.498] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event13)
[    37.498] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    37.498] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[    37.498] (**) Eee PC WMI hotkeys: always reports core events
[    37.498] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event13"
[    37.498] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[    37.498] (--) evdev: Eee PC WMI hotkeys: Found keys
[    37.498] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[    37.498] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input20/event13"
[    37.499] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[    37.499] (**) Option "xkb_rules" "evdev"
[    37.499] (**) Option "xkb_model" "pc105"
[    37.499] (**) Option "xkb_layout" "de"
[    37.500] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    37.501] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    37.501] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    37.501] (**) AT Translated Set 2 keyboard: always reports core events
[    37.501] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    37.501] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    37.501] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    37.501] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    37.501] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    37.501] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[    37.501] (**) Option "xkb_rules" "evdev"
[    37.501] (**) Option "xkb_model" "pc105"
[    37.501] (**) Option "xkb_layout" "de"
[    37.503] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[    37.503] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    37.503] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[    37.503] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    37.503] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    37.503] (II) LoadModule: "synaptics"
[    37.504] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    37.504] (II) Module synaptics: vendor="X.Org Foundation"
[    37.504] 	compiled for 1.18.4, module version = 1.8.3
[    37.504] 	Module class: X.Org XInput Driver
[    37.504] 	ABI class: X.Org XInput driver, version 22.1
[    37.504] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    37.504] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    37.504] (**) Option "Device" "/dev/input/event8"
[    37.568] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    37.568] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5722 (res 65)
[    37.568] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4706 (res 97)
[    37.568] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    37.568] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    37.568] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    37.568] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    37.568] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    37.568] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    37.600] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event8"
[    37.600] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[    37.600] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    37.600] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    37.600] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[    37.601] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    37.601] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    37.601] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    37.601] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    37.602] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    37.603] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[    37.603] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    42.566] (II) RADEON(0): EDID vendor "IVO", prod id 1161
[    42.566] (II) RADEON(0): Using EDID range info for horizontal sync
[    42.566] (II) RADEON(0): Using EDID range info for vertical refresh
[    42.566] (II) RADEON(0): Printing DDC gathered Modelines:
[    42.566] (II) RADEON(0): Modeline "1366x768"x0.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)
[    44.366] (II) RADEON(0): EDID vendor "IVO", prod id 1161
[    44.366] (II) RADEON(0): Using hsync ranges from config file
[    44.367] (II) RADEON(0): Using vrefresh ranges from config file
[    44.367] (II) RADEON(0): Printing DDC gathered Modelines:
[    44.367] (II) RADEON(0): Modeline "1366x768"x0.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)
[    51.476] (II) RADEON(0): EDID vendor "IVO", prod id 1161
[    51.476] (II) RADEON(0): Using hsync ranges from config file
[    51.476] (II) RADEON(0): Using vrefresh ranges from config file
[    51.476] (II) RADEON(0): Printing DDC gathered Modelines:
[    51.476] (II) RADEON(0): Modeline "1366x768"x0.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)
[    54.068] (II) RADEON(0): EDID vendor "IVO", prod id 1161
[    54.068] (II) RADEON(0): Using hsync ranges from config file
[    54.068] (II) RADEON(0): Using vrefresh ranges from config file
[    54.068] (II) RADEON(0): Printing DDC gathered Modelines:
[    54.069] (II) RADEON(0): Modeline "1366x768"x0.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)
[    54.267] (II) RADEON(0): EDID vendor "IVO", prod id 1161
[    54.267] (II) RADEON(0): Using hsync ranges from config file
[    54.268] (II) RADEON(0): Using vrefresh ranges from config file
[    54.268] (II) RADEON(0): Printing DDC gathered Modelines:
[    54.268] (II) RADEON(0): Modeline "1366x768"x0.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)
[    54.805] (II) RADEON(0): EDID vendor "IVO", prod id 1161
[    54.805] (II) RADEON(0): Using hsync ranges from config file
[    54.805] (II) RADEON(0): Using vrefresh ranges from config file
[    54.805] (II) RADEON(0): Printing DDC gathered Modelines:
[    54.805] (II) RADEON(0): Modeline "1366x768"x0.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)
[   370.739] (II) config/udev: removing device Power Button
[   370.752] (II) evdev: Power Button: Close
[   370.753] (II) UnloadModule: "evdev"
[   370.753] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   370.754] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   370.754] (II) Using input driver 'evdev' for 'Power Button'
[   370.754] (**) Power Button: always reports core events
[   370.754] (**) evdev: Power Button: Device: "/dev/input/event2"
[   370.754] (--) evdev: Power Button: Vendor 0 Product 0x1
[   370.754] (--) evdev: Power Button: Found keys
[   370.754] (II) evdev: Power Button: Configuring as keyboard
[   370.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   370.754] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   370.754] (**) Option "xkb_rules" "evdev"
[   370.754] (**) Option "xkb_model" "pc105"
[   370.754] (**) Option "xkb_layout" "de"
[   370.754] (WW) Option "xkb_variant" requires a string value
[   370.754] (WW) Option "xkb_options" requires a string value
[   370.785] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event11)
[   370.785] (II) No input driver specified, ignoring this device.
[   370.785] (II) This device may have been added with another device file.
[   370.788] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   370.788] (II) No input driver specified, ignoring this device.
[   370.788] (II) This device may have been added with another device file.
[   370.795] (II) config/udev: removing device Sleep Button
[   370.820] (II) evdev: Sleep Button: Close
[   370.820] (II) UnloadModule: "evdev"
[   370.824] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   370.838] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   370.840] (II) Using input driver 'evdev' for 'Sleep Button'
[   370.840] (**) Sleep Button: always reports core events
[   370.840] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[   370.842] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   370.842] (--) evdev: Sleep Button: Found keys
[   370.842] (II) evdev: Sleep Button: Configuring as keyboard
[   370.842] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[   370.842] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   370.842] (**) Option "xkb_rules" "evdev"
[   370.843] (**) Option "xkb_model" "pc105"
[   370.843] (**) Option "xkb_layout" "de"
[   370.843] (WW) Option "xkb_variant" requires a string value
[   370.843] (WW) Option "xkb_options" requires a string value
[   370.849] (II) config/udev: removing device Video Bus
[   370.860] (II) evdev: Video Bus: Close
[   370.861] (II) UnloadModule: "evdev"
[   370.862] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   370.862] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   370.862] (II) Using input driver 'evdev' for 'Video Bus'
[   370.862] (**) Video Bus: always reports core events
[   370.862] (**) evdev: Video Bus: Device: "/dev/input/event4"
[   370.863] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   370.863] (--) evdev: Video Bus: Found keys
[   370.863] (II) evdev: Video Bus: Configuring as keyboard
[   370.863] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event4"
[   370.863] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   370.863] (**) Option "xkb_rules" "evdev"
[   370.863] (**) Option "xkb_model" "pc105"
[   370.863] (**) Option "xkb_layout" "de"
[   370.863] (WW) Option "xkb_variant" requires a string value
[   370.863] (WW) Option "xkb_options" requires a string value
[   370.981] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[   370.981] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   370.983] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9)
[   370.983] (II) No input driver specified, ignoring this device.
[   370.983] (II) This device may have been added with another device file.
[   370.984] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event10)
[   370.984] (II) No input driver specified, ignoring this device.
[   370.984] (II) This device may have been added with another device file.
[   370.985] (II) config/udev: removing device USB 2.0 UVC VGA WebCam
[   371.021] (II) evdev: USB 2.0 UVC VGA WebCam: Close
[   371.022] (II) UnloadModule: "evdev"
[   371.024] (II) config/udev: Adding input device USB 2.0 UVC VGA WebCam (/dev/input/event12)
[   371.024] (**) USB 2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
[   371.024] (II) Using input driver 'evdev' for 'USB 2.0 UVC VGA WebCam'
[   371.024] (**) USB 2.0 UVC VGA WebCam: always reports core events
[   371.024] (**) evdev: USB 2.0 UVC VGA WebCam: Device: "/dev/input/event12"
[   371.024] (--) evdev: USB 2.0 UVC VGA WebCam: Vendor 0x13d3 Product 0x5716
[   371.024] (--) evdev: USB 2.0 UVC VGA WebCam: Found keys
[   371.025] (II) evdev: USB 2.0 UVC VGA WebCam: Configuring as keyboard
[   371.025] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input19/event12"
[   371.025] (II) XINPUT: Adding extended input device "USB 2.0 UVC VGA WebCam" (type: KEYBOARD, id 9)
[   371.025] (**) Option "xkb_rules" "evdev"
[   371.025] (**) Option "xkb_model" "pc105"
[   371.025] (**) Option "xkb_layout" "de"
[   371.025] (WW) Option "xkb_variant" requires a string value
[   371.025] (WW) Option "xkb_options" requires a string value
[   371.029] (II) config/udev: removing device AT Translated Set 2 keyboard
[   371.045] (II) evdev: AT Translated Set 2 keyboard: Close
[   371.045] (II) UnloadModule: "evdev"
[   371.046] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[   371.046] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   371.046] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   371.046] (**) AT Translated Set 2 keyboard: always reports core events
[   371.046] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[   371.047] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   371.047] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   371.047] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   371.047] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[   371.047] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[   371.047] (**) Option "xkb_rules" "evdev"
[   371.047] (**) Option "xkb_model" "pc105"
[   371.047] (**) Option "xkb_layout" "de"
[   371.047] (WW) Option "xkb_variant" requires a string value
[   371.047] (WW) Option "xkb_options" requires a string value
[   371.050] (II) config/udev: removing device RAPOO RAPOO 5G Wireless Device
[   371.077] (II) evdev: RAPOO RAPOO 5G Wireless Device: Close
[   371.077] (II) UnloadModule: "evdev"
[   371.080] (II) config/udev: Adding input device RAPOO RAPOO 5G Wireless Device (/dev/input/event5)
[   371.080] (**) RAPOO RAPOO 5G Wireless Device: Applying InputClass "evdev keyboard catchall"
[   371.080] (II) Using input driver 'evdev' for 'RAPOO RAPOO 5G Wireless Device'
[   371.080] (**) RAPOO RAPOO 5G Wireless Device: always reports core events
[   371.080] (**) evdev: RAPOO RAPOO 5G Wireless Device: Device: "/dev/input/event5"
[   371.081] (--) evdev: RAPOO RAPOO 5G Wireless Device: Vendor 0x24ae Product 0x2003
[   371.081] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found keys
[   371.081] (II) evdev: RAPOO RAPOO 5G Wireless Device: Configuring as keyboard
[   371.081] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.2/0000:05:00.0/usb8/8-1/8-1:1.0/0003:24AE:2003.0001/input/input11/event5"
[   371.081] (II) XINPUT: Adding extended input device "RAPOO RAPOO 5G Wireless Device" (type: KEYBOARD, id 10)
[   371.081] (**) Option "xkb_rules" "evdev"
[   371.081] (**) Option "xkb_model" "pc105"
[   371.081] (**) Option "xkb_layout" "de"
[   371.081] (WW) Option "xkb_variant" requires a string value
[   371.081] (WW) Option "xkb_options" requires a string value
[   371.086] (II) config/udev: Adding input device RAPOO RAPOO 5G Wireless Device (/dev/input/mouse0)
[   371.086] (II) No input driver specified, ignoring this device.
[   371.086] (II) This device may have been added with another device file.
[   371.087] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
[   371.089] (II) UnloadModule: "synaptics"
[   371.090] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[   371.090] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   371.090] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[   371.090] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   371.090] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   371.090] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   371.090] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   371.090] (**) Option "Device" "/dev/input/event8"
[   371.160] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[   371.160] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5722 (res 65)
[   371.160] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4706 (res 97)
[   371.160] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   371.160] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   371.160] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   371.160] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   371.161] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   371.161] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   371.200] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event8"
[   371.200] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[   371.200] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   371.201] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   371.201] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[   371.204] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   371.205] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   371.205] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   371.205] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   371.205] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   371.207] (II) config/udev: removing device PixArt USB Optical Mouse
[   371.246] (II) evdev: PixArt USB Optical Mouse: Close
[   371.247] (II) UnloadModule: "evdev"
[   371.249] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event7)
[   371.249] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[   371.249] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[   371.249] (**) PixArt USB Optical Mouse: always reports core events
[   371.249] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event7"
[   371.249] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
[   371.249] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[   371.249] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[   371.249] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[   371.250] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[   371.250] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[   371.250] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[   371.250] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[   371.250] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   371.250] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.2/0000:05:00.0/usb8/8-2/8-2:1.0/0003:093A:2510.0003/input/input13/event7"
[   371.250] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 12)
[   371.251] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[   371.253] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[   371.253] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[   371.253] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[   371.253] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[   371.254] (II) config/udev: removing device RAPOO RAPOO 5G Wireless Device
[   371.282] (II) evdev: RAPOO RAPOO 5G Wireless Device: Close
[   371.283] (II) UnloadModule: "evdev"
[   371.285] (II) config/udev: Adding input device RAPOO RAPOO 5G Wireless Device (/dev/input/event6)
[   371.285] (**) RAPOO RAPOO 5G Wireless Device: Applying InputClass "evdev pointer catchall"
[   371.286] (**) RAPOO RAPOO 5G Wireless Device: Applying InputClass "evdev keyboard catchall"
[   371.286] (II) Using input driver 'evdev' for 'RAPOO RAPOO 5G Wireless Device'
[   371.286] (**) RAPOO RAPOO 5G Wireless Device: always reports core events
[   371.286] (**) evdev: RAPOO RAPOO 5G Wireless Device: Device: "/dev/input/event6"
[   371.286] (--) evdev: RAPOO RAPOO 5G Wireless Device: Vendor 0x24ae Product 0x2003
[   371.286] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found 9 mouse buttons
[   371.286] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found scroll wheel(s)
[   371.286] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found relative axes
[   371.286] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found x and y relative axes
[   371.286] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found absolute axes
[   371.286] (II) evdev: RAPOO RAPOO 5G Wireless Device: Forcing absolute x/y axes to exist.
[   371.286] (--) evdev: RAPOO RAPOO 5G Wireless Device: Found keys
[   371.287] (II) evdev: RAPOO RAPOO 5G Wireless Device: Configuring as mouse
[   371.287] (II) evdev: RAPOO RAPOO 5G Wireless Device: Configuring as keyboard
[   371.287] (II) evdev: RAPOO RAPOO 5G Wireless Device: Adding scrollwheel support
[   371.287] (**) evdev: RAPOO RAPOO 5G Wireless Device: YAxisMapping: buttons 4 and 5
[   371.287] (**) evdev: RAPOO RAPOO 5G Wireless Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   371.287] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.2/0000:05:00.0/usb8/8-1/8-1:1.1/0003:24AE:2003.0002/input/input12/event6"
[   371.287] (II) XINPUT: Adding extended input device "RAPOO RAPOO 5G Wireless Device" (type: KEYBOARD, id 11)
[   371.287] (**) Option "xkb_rules" "evdev"
[   371.287] (**) Option "xkb_model" "pc105"
[   371.287] (**) Option "xkb_layout" "de"
[   371.287] (WW) Option "xkb_variant" requires a string value
[   371.288] (WW) Option "xkb_options" requires a string value
[   371.290] (II) evdev: RAPOO RAPOO 5G Wireless Device: initialized for relative axes.
[   371.290] (WW) evdev: RAPOO RAPOO 5G Wireless Device: ignoring absolute axes.
[   371.291] (**) RAPOO RAPOO 5G Wireless Device: (accel) keeping acceleration scheme 1
[   371.291] (**) RAPOO RAPOO 5G Wireless Device: (accel) acceleration profile 0
[   371.292] (**) RAPOO RAPOO 5G Wireless Device: (accel) acceleration factor: 2.000
[   371.292] (**) RAPOO RAPOO 5G Wireless Device: (accel) acceleration threshold: 4
[   371.295] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse1)
[   371.295] (II) No input driver specified, ignoring this device.
[   371.295] (II) This device may have been added with another device file.
[   371.295] (II) config/udev: removing device Eee PC WMI hotkeys
[   371.313] (II) evdev: Eee PC WMI hotkeys: Close
[   371.314] (II) UnloadModule: "evdev"
[   371.320] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event13)
[   371.320] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   371.321] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[   371.321] (**) Eee PC WMI hotkeys: always reports core events
[   371.321] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event13"
[   371.321] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[   371.321] (--) evdev: Eee PC WMI hotkeys: Found keys
[   371.321] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[   371.321] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input20/event13"
[   371.321] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[   371.321] (**) Option "xkb_rules" "evdev"
[   371.321] (**) Option "xkb_model" "pc105"
[   371.321] (**) Option "xkb_layout" "de"
[   371.321] (WW) Option "xkb_variant" requires a string value
[   371.321] (WW) Option "xkb_options" requires a string value
[   783.707] (II) RADEON(0): EDID vendor "IVO", prod id 1161
[   783.707] (II) RADEON(0): Using hsync ranges from config file
[   783.707] (II) RADEON(0): Using vrefresh ranges from config file
[   783.707] (II) RADEON(0): Printing DDC gathered Modelines:
[   783.707] (II) RADEON(0): Modeline "1366x768"x0.0   76.85  1366 1414 1446 1560  768 771 783 821 -hsync -vsync (49.3 kHz eP)

Und nun wieder zurück zu Xubuntu ...

Moinmoin

Tiger-Oli

Moinmoin,

nur als Update - in der Xubuntu-Variante gehen Maus und Tastatur nicht, und auch nicht Strg-Tasten Befehle. Bei Strg + Alt + F1 gibt es leider keine Reaktion.

Auf der Ubuntu-Version, auf der ich aktuel gerade bin, da geht diese Tastenkombination. In Xubuntu - freeze, freeze, freeze

Ich gebe es langsam auf. Wie komme ich aber an meine Daten? Ist alles nix für mich irgendwie - wenn ich die Wiki-und Hilfeseiten lese, kollabiere ich meist irgendwann mit Befehlen, Unterprogrammen, Mounten, sehr komplex alles!

Shit.

Grüße aus Bremen

Tiger-Oli

Ich versuche mal, Thunar bei Xubuntu als root zu starten, und recherchiere die Befehle.

Kann es auch sein, dass es was mit der XFCE-Anzeige zu tun hat?

http://www.ubuntu-forum.de/artikel/47334/xfce-desktop-kaputt.html

Oder sogar ...

https://forum.xfce.org/viewtopic.php?id=10727

Als root ist das ja möglich, da kann ich mich hinter Xubuntu bewegen (in sda1)

Mal schauen ....